1. Cartesian coordinate type (1) Advantages: This kind of operator has a simple structure, strong intuitive movement, and is convenient to achieve high precision. (2) Disadvantages: It occupies a large space and has a small working range. 2. Cylindrical coordinate type (1) Strengths: Same Cartesian coordinate type ...

Inputs and outputs are used for logic programming, and digital and analog inputs and outputs can be used for communication with the peripherals of the robot control system. When programming the KUKA robot, the ...

1. Manual operation of KUKA robots (1) Turn the black knob above the teach pendant from vertical to horizontal. (2) Selection form, T1 form (internal initiative). (3) Press the servo ON at the bottom to jog to control the robot. (4) Press the arrow keys ...

The teaching pendant, also known as the teaching programmer or teaching box, is a hand-held device for manual operation, program writing, parameter equipment and monitoring of the robot; It is the core component of the robot control system, and is a device used to register and store mechanical movement or processing memory.

Causes and repair methods of overheating of KUKA robot servo motor bearings Causes of overheating of servo motor bearings: 1. The cooperation between the inner and outer rings of the bearing is too tight; 2. There are problems with the shape and position tolerance of parts, such as machine base, end cover...

The data stored in the robot arm is important to protect the encoder pulse values for each axis in the robot. This will manipulate the robot's orientation data. If the battery in the manipulator fails, then if the main power supply is lost, the manipulator needs to be re-operated. Annual Replacement (for ...

1. Select Put into operation > Measure > Stuff > XYZ 4 points from the main menu. 2. Give a number and a name for the thing to be measured. I admit it with the continuation key. 3. Use TCP to move to any reference point. Click Measure. Click Yes to reply to the security question ...

The vast majority of robots in operation now consist of six joints with a simple "output" for interacting with the workpiece. Applications range from pick-and-place operations, to moving cameras and other viewing devices, to performing precision assembly tasks that touch collaborative parts. This is certainly far ...

Don't panic when the robot has a problem in the working process, if the fault is not caused by the controller, then the cause of the problem must be the damage to the machine parts. In order to deal with the problem in the easiest way possible, the problem should be analyzed. And the need to find out which part is the lead ...

1. Able to carry out high-precision packaging operations According to the integration of the stacking robot with other machinery and equipment, the intelligent robot can completely complete the original messy packaging operation, saving a lot of labor for the company and making due contributions to the company's intelligent production and production. ...

How to clean up common problems with infrared touch screen 1. Double-click is not very active Open the infrared screen to adjust its activity and reduce the activity. 2. Under what conditions will drift occur Because the operating principle of the infrared screen is to rely on infrared rays...

Robots at the same station, in the process of operation, need to enter the same area, but there is no strict restriction on the order of entry, a robot (Master) has the right of priority, that is, the robot first enters the dry and area, and another robot (Slave) after the operation is completed...

The reducer is an independent component composed of gear transmission, worm transmission and gear-worm transmission closed in a rigid shell, and is often used as a deceleration transmission device between the prime mover and the working machine. It plays the role of matching speed and transmitting torque between the prime mover and the working machine or actuator ...

Before the KUKA robot is put into operation for the first time, it is necessary to carry out a review to ensure that the equipment and equipment are in perfect condition, functional, safe and faulty. It is necessary to comply with the labor protection regulations of the country and region of the location, and it is also necessary to test all safety electrical ...

In order to improve the welding attainability, the arc welding workstation usually uses a variety of positioners, and the common formforms of positioners include L-shaped positioners, tipping positioners, headstock positioners, etc. In the meantime, the L-type positioner and the tilting positioner have two external shafts, and some special working conditions require ...

In the process of long-term use of KUKA robots, with the increase of operation time, various parts and parts will present various problems due to the influence of many factors such as friction, corrosion, vibration, impact, bumps, etc., so only by dealing with these problems and insisting on the normal operation of the robot can ...

The force sensor is used to detect the external force information, and the force signal is converted into the azimuth of the robot. Compliance exercises are implemented in a five-joint robot. Robot teach pendant repair advocates the use of real-time gravity and clash compensation to complete direct education without torque sensors. A method of free force manipulation is proposed ...

1. Hot-swap button for the cable of the robot teach pendant (after pressing this button, the control cabinet can unplug the teach pendant without shutting down). 2. Connect the manager key switch; Switch the mode of movement, T1: manual low speed (as long as the manual mobile robot is capable in this form, * high speed 250mm/s), T2: manual ...

Switching the axes of the external kuka robot to the bit arrangement in an asynchronous form means switching the synchronous and asynchronous forms of the external axes Program example: $ ASYNC_AXIS='b1000' Indicates the outer axis 1, 2, 3, 4 from right to left. The example above shows that an external welding robot ...

1. Maintain good parts Parts are an important part of CNC machine tool robots, the reason why the parts of CNC machine tool manipulators show severe wear and tear in the process of use, mainly because of the problems of people's devices, so that the position of parts is problematic.

The cost of the global robot is mainly composed of: about 35% of the reducer, about 20% of the servo machine, about 15% of the control system, and only about 15% of the mechanical processing of the robot body. The world's high-end robots are mainly controlled by a small number of international robot companies such as ABB, Fanuc and Kuka, and they ...