Industrial robot coordinate system and its characteristics - KUKA robot

Annotations are the parts that make up/clarify in a programming language. All programming utterances consist of computer instructions (code) and hints (comments) to a text editor. If the source program (compilation, commentary, etc.) is further processed, the processing software ignores the comments and therefore does not ...

1. Degrees of freedom and degrees of freedom are the main goals to measure the level of robotics. The so-called degrees of freedom refer to the independent motion of moving parts relative to a fixed coordinate system. Each degree of freedom requires a servo axis to drive, so the higher the number of degrees of freedom, the more chaotic the robot can complete the actions ...

1. The robot pipeline includes cable harnesses, robot SMB lines, robot communication lines and robot connection lines as communication, power supply cables and optical fibers. The product has excellent properties such as high heat resistance, oil resistance, bending resistance, impact resistance, and insulation. ...

Functionally, KUKA robots can be divided into arc welding robots, casting and forging robots, and handling/palletizing robots. KUKA arc welding robot refers to an industrial robot that performs automatic arc welding, which is basically the same as a spot welding robot. Welding robots are mainly used for welding of various automotive parts.

Before the KUKA robot is put into operation for the first time, it is necessary to carry out a review to ensure that the equipment and equipment are intact and functional, that they can operate safely and that faults can be identified. It is necessary for us to comply with the labor protection regulations of the country and region to check, and it is also necessary to test all safety ...

The KUKA robot program works in several different ways, which can be selected on the teach pendant. 1. By clicking on the "Program Working Methods" icon, you can check and select different methods Second, the program working methods are respectively [Go], [action], [single ...

Second, welding is a common name for "carbon dioxide gas maintenance welding", and argon maintenance welding (commonly known as "argon arc welding") and other gas maintenance welding are called "gas maintenance welding". The advantage of the second protection welding is that it is open arc welding, which is easy to achieve all-round semi-...

1. Do a load test and use it correctly in the program. 2. Replace all LIN and CIRC commands with SLIN and SCIRC 3. Delete the PTP movement instructions that are repeated at the point, and try to have as few transition points as possible 4. Can be used with the imminent ...

Before the KUKA robot is put into operation for the first time, it is necessary to carry out a review to ensure that the equipment and equipment are in perfect condition, functional, safe and faulty. It is necessary to comply with the labor protection regulations of the country and region of the location, and it is also necessary to test all safety electrical ...

1. According to the equipment method, it is divided into: straight equipment and horizontal installation. The company uses drones, automation, robotics and artificial intelligence to leverage these important warehouse goals to better serve its customers while improving its bottom line. ...

In the process of long-term use of KUKA robots, with the increase of operation time, various parts and parts will present various problems due to the influence of many factors such as friction, corrosion, vibration, impact, bumps, etc., so only by dealing with these problems and insisting on the normal operation of the robot can ...

1. The button to unplug the smartPAD 2. Operation method selector switch: (1) With a key: The operation method can only be changed if the key is pierced. (2) Without a key: The connection manager can be called by selecting the switch by operating the method. Elapse...

How to clean up common problems with infrared touch screen 1. Double-click is not very active Open the infrared screen to adjust its activity and reduce the activity. 2. Under what conditions will drift occur Because the operating principle of the infrared screen is to rely on infrared rays...

The KUKA robot power module KPS600/25-ESC error code and content includes: ERROR 52 The temperature in the boudoir is too high ERROR 79 COMMUNICATION FAILURE BETWEEN THE EEPROM ON THE CONTROL UNIT ERROR 65 ...

Precautions for replacing the battery: It is necessary for the robot control system to be shut down and have protection measures against accidental restarts; The power cord is de-energized; It is necessary to wear gloves when disassembling. ...

KUKA iiQoT simplifies data-driven automation for businesses. To do this, the software uses the benefits of the Industrial Internet of Things (IIoT): it brings together the condition data of the entire robotics team, from hardware to software to controllers, in a single channel that is clear and unambiguous. KUKA ...

In order to solve the pain points of welding professions, such as high variety, small batch, poor team consistency, harsh working environment, long commissioning time, and difficult changeover, KUKA Industry has launched a new treatment solution, Smart Welding. Smart Welding is developed in depth according to kuka.SimPro, offline programming without teaching, no ...

1. Active operation method When the KUKA robot is in active operation, it first selects the program that needs to be operated in the manual condition, and then switches the robot to self-power through the key switch, and then starts the robot operation program, so that the robot can reach the BCO safety reference point first, and then ...

KUKA robot protective clothing is divided into a variety of types, different types have different functions, anti-static, dustproof, waterproof, etc. Here is a detailed introduction to the different types of robot protective clothing provided by Hongsheng Decheng, different characteristics and protective functions. ...

The manual movement method of industrial robots is mainly divided into four control methods: point control method, continuous track control method, force (torque) control method and intelligent control method. 1. Point Control Method (PTP) This manipulation ...