The use of logical functions in robot programs – KUKA robots

KUKA robot protective clothing is divided into a variety of types, different types have different functions, anti-static, dustproof, waterproof, etc. Here is a detailed introduction to the different types of robot protective clothing, different characteristics and protective functions provided by Hongsheng Decheng. ...

(1) Provide voltage and have the function of power distribution (2) The decombiner (SIL2) technology is used to collect the orientation information of the eight motors for orientation feedback (3) Obtain the real-time temperature of the motor (PTC) （4） ...

1. The correct sequence of turning on or off the robot: (1) Correct boot sequence Open the robot control cabinet first, and then turn on the power supply of the welding machine - the power supply of the water tank and the power supply of the dust removal equipment (2) Correct shutdown sequence Close the robot control cabinet first - then turn off the power supply of the welding machine - ...

With the proposal of Made in China 2025 and the country's strong support for high-end manufacturing, the development of China's robot industry is very agile, and industrial robots are constantly changing the customs of welding robots. Based on the ten-kilogram arc welding robot, with light weight, high stiffness and high speed functions, it is based on the ...

Advanced Osteotomy Tools AG (AOT), a Switzerland medical skills company, announces the launch of CARLO® in clinical use (First-in-man). Medical devices with the KUKA robot LBR Med are successfully used in the Department of Oral, Jaw and Facial Surgery at the University Hospital Basel. ...

As a branch of industrial robots, KUKA SCARA robots are capable of installation, packaging, labeling, sorting and other processing technologies with their high precision, high cost performance, high flexibility and strong adaptability, helping many manufacturing enterprises to reduce staff and increase efficiency. But with the recent years of high-tech ...

Don't panic when the robot has a problem in the working process, if the fault is not caused by the controller, then the cause of the problem must be the damage to the machine parts. In order to deal with the problem in the easiest way possible, the problem should be analyzed. And the need to find out which part is the lead ...

The functional characteristics of industrial robots affect the operating power and reliability of robots, and the following functional policies should be considered in the planning and selection of robots: (1) Leisure: Leisure is the primary policy to measure the level of robotics technology. The so-called leisure degree refers to the fact that the moving parts are related to the fixed ...

KUKA palletizing robots are widely used to move goods to or from pallets (unloading palletizing) and to lift, palletize, pack, transport, sort and mark. This process is not only closely related to the wooden furniture industry, the food logistics sector, but also ...

1. Move the gripper to an open area, stop all mechanical maintenance operations on the gripper, pay attention to safety! 2. Copy the "Program Pictures and Configuration Files" folder to a USB flash drive and plug it into the control cabinet 3. In SmartPAD...

Fault Symptom: After the robot is turned on, the teach pendant shows KSS15101 fault code (the safety device is wrong in 5 safety nodes from 0 to 4 channels), and the robot cannot be put into operation normally. Fault Detection: First inspect the site ...

In Arc StartV, the A directive is a condition for arc welding, i.e., after the tp program directly specifies the welding current and voltage or the delivery speed of the metal wire, the end welding is started. According to the setting of the equipment variety, imitation input and output ...

1. Program control system: apply a certain rule of control to each degree of freedom, and the robot can complete the required space orbit. 2. Adaptive control system: when the external conditions change, in order to ensure the required quality or in order to improve the control with the accumulation of experience...

The maintenance content of the robot is mainly to replace the lubricating oil of the six shaft reducers and the lubricating oil of the J4 shaft gear shaft, the replacement of wearing parts, the inspection of the operation status of each module in the control cabinet, and the inspection of the wear status of each cable in the control cabinet. If the grease is not replaced for a long time, the six axes of the robot will be formed.

KUKA six-axis robot is a joint machine with 6 movable joint axes, similar to a human arm, known as a 6-axis joint robot, 6-axis industrial manipulator or 6-axis industrial robot, which is one of the most common forms of industrial robots in the industrial field today. Suitable for many industrial ...

Traditional six-axis industrial robots generally have 6 degrees of freedom, including rotation (S-axis), lower arm (L-axis), upper arm (U-axis), wrist rotation (R-axis), wrist swing (B-axis) and wrist rotation (T-axis). The 6 joints are combined to achieve the 6 degrees of freedom movement at the end. ...

The efficient and flexible production of a wide range of batches is seen as a challenge for future production. Overcoming this challenge requires the perfect coordination between man and machine. In today's modern factories, there are already a lot of automation ...

In the KUKA robot quadrilateral program, an accounting reference point is set, and other points of the quadrilateral are calculated with the reference point, and then the robot TCP is used to take a quadrilateral trajectory using the movement command. This program is for reference only, basic programming program. ...

KUKA's Edition robot assists new customers in price-sensitive shopping malls in the useful automation of welding tasks. Focus on the main points, have a higher cost-to-benefit ratio, and can obtain the skill set at that time. Initially, the KR CYBERTECH nano ARC was available in two variants of the Editi ...

KUKA's KR 3 AGILUS conquers Brazil's Bionicook to serve snacks, drinks and desserts in the world's first fully active fast food vending machine. Industrial enterprises have long begun to adopt the ...