Step 1: View the environment 1. Recognize the ambient temperature: The ambient temperature of the KUKA control cabinet is required to be between 5°C-45°C, the working environment temperature of the robot body is 10°C-55°C, and the working temperature of some new models is 0°C-55°C (see the robot skills manual for details).

1. Robot welding can improve the output power The six-axis welding robot has a short response time and fast action. The welding speed is 50-160cm/min, which is much higher than that of manual welding (40-60cm/min). The bot does not abort during operation. As long as external hydroelectric conditions are ensured, ...

The drive control system is mainly used to control the robot to move according to the set motion parameters. It primarily consists of servo drives, servo motors and manipulators. (1) The servo motor is mainly used to drive the joints of the robot, and it is required to have ...

1. Problems in the load setting of KUKA robots In fact, there is only one intention, a suitable load, under the appropriate driving force, the manipulator can withstand enough moment of inertia regardless of static or dynamic to ensure that the electrical control system controls the manipulator. and other machines ...

The parallel robot has no accumulated errors and high accuracy; The driving equipment can be placed on or close to the orientation of the fixed platform, so that the moving part is light in weight, high in speed and good in dynamic response; Compact structure, high stiffness, large bearing capacity; Small working space and other features. ...

KUKA launched the KR C5 micro IP54 anti-oil mist protective cover, which escorts the efficient work of the KR C5 micro control cabinet in harsh environments such as dust and oil mist, and uses a super heat dissipation system to cool the control cabinet in the protective cover. ...

1. Understand the ontological structure of the robot The KUKA robot used in the workshop is composed of 6 axes, each axis is driven by 1 servo motor, and each axis of the robot is operated independently to control the servo motor to rotate forward and backward after powering on, and the single-axis operation is carried out in T1 mode. Second, choose the shaft to sit ...

The manual movement method of industrial robots is mainly divided into four control methods: point control method, continuous track control method, force (torque) control method and intelligent control method. 1. Point Control Method (PTP) This manipulation ...

1. Programming More advanced automation is sensitive from the start. Industrial robots can be programmed to respond to changes in the environment. As a result, they can play a very good role in small groups, in different parts of the production system, in equal and efficient processes. ...

In order to improve the welding reach, the arc welding workstation usually uses a variety of positioners, and the common forms of positioners include L-shaped positioners, tipping positioners, head and tailstock positioners, etc. Among them, the L-shaped positioner and the tipping positioner have two external shafts, and some special working conditions require ...

In the domestic welding robot equipment career development speed is fast, from the past individual enterprise use, to the current most of the professional production welding is inseparable from KUKA robot equipment, the application field is more and more extensive. The most important thing in welding work is to ensure the quality of welding, welding quality ...

The industrial visual positioning system provides accurate operation direction and posture guidance for industrial robots for transfer, sorting, palletizing, installation and other missions, which is suitable for common policy types and different use needs, including 2D plane positioning (3 degrees of freedom), 2.5D positioning (4 degrees of freedom) and 3D spatial positioning.

From the perspective of customers in the domestic market, due to the high sensitivity and low cost of collaborative robots, small and medium-sized enterprises are the main force in the use of collaborative robots. In addition, from a practical point of view, China's aging trend is becoming more and more significant, and the cost of domestic labor continues to rise. The manufacturing industry seeks to find more ...

The functional characteristics of industrial robots affect the operating power and reliability of robots, and the following functional policies should be considered in the planning and selection of robots: (1) Leisure: Leisure is the primary policy to measure the level of robotics technology. The so-called leisure degree refers to the fact that the moving parts are related to the fixed ...

The maintenance content of the robot is mainly to replace the lubricating oil of the six shaft reducers and the lubricating oil of the J4 shaft gear shaft, the replacement of wearing parts, the inspection of the operation status of each module in the control cabinet, and the inspection of the wear status of each cable in the control cabinet. If the grease is not replaced for a long time, the six axes of the robot will be formed.

Generally speaking, industrial robots are composed of three major parts and six subsystems. The three major parts are the mechanical part, the sensing part and the control part. The six subsystems can be divided into mechanical structure system, drive system, perception system, robot-environment interaction system, human-computer interaction system and control system.

The power of the electric drive equipment is simple, the speed change scale is large, the efficiency is high, and the speed and position accuracy are high. However, they are often associated with deceleration equipment, and direct drive is more difficult. Electric drive equipment can be divided into direct current (DC), communication (AC) servo motor drive and stepper electric ...

Traditional six-axis industrial robots generally have 6 degrees of freedom, including rotation (S-axis), lower arm (L-axis), upper arm (U-axis), wrist rotation (R-axis), wrist swing (B-axis) and wrist rotation (T-axis). The 6 joints are combined to achieve the 6 degrees of freedom movement at the end. ...

1. Protect content 1. Check the heat dissipation of the controller It is forbidden to cover the manipulator with plastic or other materials; Leave a satisfying distance between the rear and side of the controller (>120mm); It is forbidden to place the controller close to the heat source; It is forbidden to put debris on the top of the controller; Prevent the controller from being too dirty; ...

According to the application status and development needs of the welding technology of KUKA welding robots, the traditional welding methods must not be able to meet the production needs to a certain extent, and the arc welding robot technology has been paid more and more attention by manufacturers. How to complete the batch production of arc welding robots, is the current arc welding machine...

1. Specification: KUKA robot proofreading settings, KUKA robot calibration with or without load at the zero point of the robot mechanic. KUKA Robot Proofreading View Check to see if the KUKA robot school is correct about this orientation, if you don't grasp this orientation is correct or need to change it...