Abort the robot: Cut off the signal $drivers_Off, this abort is to break the robot servo. Continue to start the robot after abort: Repeat the previous article "KUKA Robot External Active Start Equipment Method 1" process 4 and 5 to start the robot. ...

The concept of the KUKA robot KRC4 is revolutionary. In your robot/motion system, it seamlessly interactively connects with pLC, CNC and safety control systems. The KUKA robotic arm-based automated solution method in KRC4 uses convenient and flexible robot programming and a new spline ...

First, welding robot inspection and protection 1. Wire feeding arrangement. Including whether the wire feeding force is normal, whether the wire feeding tube is damaged, and whether there is an abnormal alarm. 2. Is the airflow normal? 3. Is the torch safety protection system normal? (It is forbidden to close the welding torch safety protection ...

1. Welding positioner. There are many specifications of welding positioners, and the common welding positioners are single-axis welding positioners. Two-axis welding positioner. Triaxial welding positioner, etc. It can be applied to different fields according to different models. The welding robot and the welding positioner move in harmony. Welding Robot ...

Very experienced welders are able to meet the requirements of the welding process precisely and the welding interface is very beautiful. However, welding can actually be done better by using robots. Because even the best welders can't match the consistency, speed and power of a machine. Machine...

1. Program control system: apply a certain rule of control to each degree of freedom, and the robot can complete the required space orbit. 2. Adaptive control system: when the external conditions change, in order to ensure the required quality or in order to improve the control with the accumulation of experience...

The vision system of mobile robot refers to the vision system of mobile robot, including two parts: obtaining pictures through sensors and processing pictures through computer processors. According to the number and characteristics of vision sensors, the mainstream mobile robot vision system includes monocular vision, binocular vision, etc.

The transfer robot is a manipulator in practical work, and the manipulator is developed because its positive role is increasingly known: First, it can partially replace manual operation; Second, it can follow the requirements of the production process, follow the certain procedures, time...

1. Reasons for zero point failure: Before analyzing the cause of zero-point failure, let's first clarify a problem. For a long time, we have been calling this fault "zero point drop", which is an inaccurate description. The zero point parameter of the KUKA robot will not be "lost", it is documented ...

The palletizing robot is a device that actively stacks the bags, cartons or other packaging materials conveyed by the conveyor according to the working method required by the customer's process, and conveys the stacked materials. Here are a few things to keep in mind when it is being debugged and repaired: ...

From the perspective of mechanical structure, industrial robots can be divided into single-axis robots, coordinate robots, horizontal multi-joint robots (SCARA), straight multi-joint robots and parallel robots (DELTA), etc., and the following five types are clarified in order. ...

The main technical parameters of the robot are freedom, resolution, working space, working speed, working load, etc. The comfort of the robot refers to the number of independent motion parameters required to determine the orientation and posture of the robot's hand in space. The degree of freedom of the robot is generally equal to ...

Industrial robots are composed of three parts and six subsystems, which can be divided into mechanical structure system, drive system, perception system, robot-environment interaction system, human-computer interaction system and control system. 1. Mechanical structure ...

(1) Select a reasonable welding sequence to reduce the welding deformation and the length of the walking path of the welding torch to draw up the welding sequence. (2) The spatial transition of the welding torch requires a short, smooth and safe moving track. (3) Optimize the welding parameters, in order to ...

1. In the T1 form, the user program is pierced into cell.src according to the control requirements, the Cell.src program is selected, and the robot operation mode is switched to ExT_ AUTO. 2. Under the condition that there is no error in the robot system, PLC-. Powering on, you have to announce Smove_ enable to the robot (to- ...

First, the robot welding speed 1. Robot welding can improve production efficiency The six-axis welding robot has a short response time and fast action. The welding speed is 50-160cm/min, which is much higher than that of manual welding (40-60cm/min). The bot does not abort during operation. Only...

The linear motion of an industrial robot refers to the linear motion of the tool TCP mounted on the flange of the sixth axis of the robot in space. The coordinate linear motion should specify the coordinate system, tool coordinates, and workpiece coordinates. Coordinate systems include earth coordinates, datum coordinates, tool coordinates, and workpiece coordinates. Specified ...

First, the characteristics of parallel robots 1. No accumulated error, high accuracy; 2. The driving equipment can be placed on or close to the direction of the fixed channel, so that the moving part is light in weight, high in speed and has good dynamic response; 3. Compact structure, high stiffness and large bearing capacity; ...

1. Unplug the fan from the control panel. 2. Loosen the 4 screws and remove the back plate. 3. Remove the set screws from the socket. 4. Fold the piercing sleeve and pull out the connecting wire. 5. Take the fan bracket with the fan...

The functional characteristics of industrial robots affect the operating power and reliability of robots, and the following functional policies should be considered in the planning and selection of robots: (1) Leisure: Leisure: Leisure is the primary policy to measure the skill level of robots.

At present, the most widely used robot on the market is industrial robots, which are also the most mature and complete robots. Industrial robots have a variety of control methods, what are the control methods of industrial robots? 1. Point Control (PTP) ...