Yamaha Robot Use Cases

BLOB lookup can be detected using 2x to 10x faster than marginal lookups. Ideal for position detection where speed is important. Only the donut shape was detected Advantage: The integration is relatively good ...

The palletizing robot is a device that actively stacks the bags, cartons or other packaging materials conveyed by the conveyor according to the working method required by the customer's process, and conveys the stacked materials. Palletizing robots have a proper and wide range of applications in the palletizing industry, which greatly saves labor, ...

(1) Open modular control architecture: the distributed CPU computer structure is selected, which is divided into robot controller (RC), motion controller (MC), optical resistive isolation I/O control board, sensor processing board and programming teaching box. The Robot Controller (RC) and the programmed teaching pendant are connected via a string...

Industrial robots are multi-joint manipulators or robots with multiple degrees of freedom for the industrial sector. Industrial robots are machines and equipment that actively perform work, and they are a kind of machines that rely on their own power and control capabilities to achieve various functions. ...

Composition of the SCARA robot The SCARA robot is a curved multi-articulated robot, which is generally composed of four joints. The structure of this robot resembles a human arm, but it is capable of carrying things on the end, such as a gripper, suction cup, or laser head. The joints of the SCARA robot are made of electricity...

Is it really valuable for Yamaha Trackrobots, autonomous driving systems to be applied to motorcycles? Back at the 2015 Tokyo Motor Show, Yamaha unveiled a track robot called Motobot, which resembles a rider ...

1. The weld bead and welding trajectory cannot be corrected First of all, in the teach-in mode, the empty walk procedure ensures that the welding orientation is correct. Secondly, consider the problem of finding the welding torch. At this time, it is necessary to consider the method of the welding robot to find the weld bead (arc is still laser) to set up, and finally, ...

(1) Choose a reasonable welding sequence. The welding sequence is drawn up by reducing the welding deformation and the length of the torch travel path. (2) The spatial transition of the welding torch requires a short, smooth and safe movement trajectory. (3) Optimize welding parameters. In order to obtain the best welding parameters, a working test is made.

Check if the robot's engine is worn, and the air filter is faulty. 1. The normal wear and tear of the engine during the use of Yamaha robots will cause the power to drop and not increase the speed, so the engine needs to be maintained frequently. 2. Yamaha Robot's air filter ...

1. The control type of the robot can be divided into open-loop control and closed-loop control according to whether there is a reaction or not, during which open-loop control is generally considered to be more accurate, but the requirements are more chaotic. Generally speaking, if we want to accomplish open-loop accurate manipulation, we need to know the accurate model of the controlled target ...

In the early stage of the presentation of industrial robots, because most of their movements were rod mechanisms such as cranks and guide rods, hydraulic drive and pneumatic drive were mostly used. The hydraulic drive system is usually composed of a hydraulic motor (various cylinders, oil motors), servo valves, oil systems, oil tanks, etc., to tighten the machine.

This article introduces the control strategy of using Siemens PLC to control Yamaha robots, using an external IO port to set command words, so that the PLC can communicate with the robot and instruct the robot to complete the corresponding actions. Siemens S7-300PLC is ...

1. There is no signal when the photoelectric switch is in place. Solution: Check whether the sending end and the receiving end of the photoelectric switch are aligned, whether the photoelectric reflex switch and the reflector plate are aligned, whether the distance between the positive reflex switch and the observed object is appropriate, and whether there is a foreign object obstruction. Photoelectric Switches: View Connections ...

With the continuous improvement and progress of linear motors, linear motors and linear drive technologies, more and more domestic enterprises have entered the R&D and production of linear motors, and the occupational demand and the scale of the domestic linear motor market are also increasing. However, many new devices may be ...

First of all, you have to prepare the software and the network port debugging assistant (the debugging assistant can be downloaded online, or you can reply to the "network port assistant" in the host, the software name is RCX-Studio Pro 2020 CL The software can be obtained by replying "2020CL" in the host. Install the software ...

In September 2015, Yamaha Motor began selling the RDV-X and RDV-P, pulse-width modulated robot drives that shorten the positioning time. These two new products are the successors to the current products "RDX" and "RDP", respectively, and the RDV-X supports the servo-motor single-axis robot "FL ...

First, the components of the robot At the most basic level, the human body consists of five main components: Of course, there are also intangible traits of human beings, such as intelligence and morality, but on a purely physical level, this ...

1. Be able to test with the debugging helper first, first set the computer IP and Yamaha controller IP, system-communication settings, and set the IP of the controller 2. In the option -Universal Ethernet Port, set GP0 (Communication Target), Mode Servo ...

1. There is no signal when the photoelectric switch is in place. Solution: Check whether the transmitter and receiver of the photoelectric switch are aligned, whether the photoelectric reflective switch and the reflector plate are aligned, whether the interval between the positive reflection switch and the object under investigation is appropriate, and whether there is a foreign object obstruction. Photoelectric Switches: View Connections ...

Process 1: Origin reversion for the first time debugging or lithium battery out of power or encoder unplugging, you need to do an origin reversion, and before the origin reversion, you need to manually put the XY axis in the center, as long as you don't run to both ends after fulfillment, you can, and the green light of the 4 axes will continue to be on. ...