Spot welding tong: used to realize the pressurization of the welded workpiece (plate). The welding tongs used by the robot are usually the transformer and the clamp body are installed together to form a whole, which is called "one-piece welding tong". In practical use, it is necessary to make a special design for the welding tong body according to the particularity of the dotting orientation, and only in this way can we ensure that the welding tong reaches the orientation of the welding joint.
OTC welding robot
It is necessary for the robot spot welding tong to adapt to the welding standards required by the spot welding workpiece, and the basic principles are:
1. According to the raw materials and plate thickness of the workpiece, confirm the maximum short-circuit current and the maximum pressure of the electrode of the welding tong;
2. According to the shape of the workpiece and the orientation of the solder joint on the workpiece, confirm the throat depth, throat width, electrode grip, large stroke, working stroke, etc. of the welding pliers;
3. Comprehensively integrate the orientation distribution of all solder joints on the workpiece to confirm what kind of welding tongs to choose, there are usually four kinds of welding tongs that are more pervasive, namely: C-type single-stroke welding tongs, C-type double-stroke welding tongs, X-type single-stroke welding tongs, X-type double-stroke welding tongs;
4. In the case of satisfying the above conditions, reduce the weight of the welding tong as much as possible.
|
More on that
|
Design of each module of the robot system – OTC
Robot is a very complex system, there are many planning challenges in mechatronics, functionality and electrical, when planning the building blocks of the robot system, it is necessary to understand the needs of these aspects and select appropriate planning ideas.
...
|
|
Welding defects and common failures – OTC robots
The robot welding uses argon-rich mixed gas maintenance welding, and the welding defects presented in the welding process generally include welding deviation, undercut, porosity, etc., the specific analysis is as follows:
(1) The welding deviation may be due to the incorrect orientation of the welding or the problem of finding the welding gun. At this time, consider T...
|
|
OTC welding robot usage tips
The development of welding robot skills has quickly experienced three stages: reproducible, perceptible, and intelligent. The reason why welding robots are so popular is mainly because of its strengths, such as: spatter, smoke and dazzling light generated during the welding process, which are very useful to manual workers.
|
|
What jobs are swarm robots suitable for? - Odichi Robot
Collective robots are teamwork-oriented, and they are well suited for applications that meet the following needs:
1. Mission needs include massiveness
Collective robots are well suited for large-scale operations including large-area projects ...
|
|
Introduction to OTC welding robot welding power supply
OTC welding robot as a widely used advanced automatic welding equipment, with high versatility, stable action characteristics, to use the robot to complete the welding task, the engineer only needs to teach the robot once can correctly reproduce the operation of the teaching process. Let the robot do the rest ...
|
|
The main input and output interface of the robot - Odichi robot
(1) I/O port
I/O input and inlet, including welding start, stop, reset, welding method selection, welding car and welding torch adjustment and other 16 switching inputs, plus pendulum photoelectric sensor switching input, sharing 17 I/O input points.
I/O outputs, 3 ...
|
|
Why is the word DAIHEN printed on the OTC robot
With the increasing number of OTC bot procurement users, the popularity is increasing. Now that more and more factory users are beginning to pay attention to OTC robot products, we may have a brief or in-depth understanding of OTC robot products from the Internet or related exhibitions.
...
|
|
How to use the OTC bot step return instruction
OTC Welding Robot Programming Process Tutorial:
Find an operation origin for the OTC welding robot: click "Program" on the teaching box, enter 9999, press "Confirm", press "Travel View", and the yellow color on the teaching box is extremely process.
...
|
|
Problem Analysis of Welding Robot - Oudixi Robot
1. Why do I need to adjust the parameters at any time when welding stainless steel?
When welding stainless steel, the primary reason why welders can adjust the welding parameters (voltage, current, arc length, induction coefficient, pulse width, etc.) at any time is the mismatched composition of the welding consumables.
Chemical composition is important, and the batch...
|
|
Advantages of OTC welding robots:
1. The body, control box, teaching box, operation box, control cable;
2. Full Chinese operation interface, simple and easy to understand, together can support 6 language selection;
3. The working radius is long, and the working radius of the standard welding robot can reach 1.4 meters or 2 meters (excluding the welding gun);
...
|
|
OTC welding robot program protection function settings
When important program requirements are protected from being modified, we can set the maintenance function, i.e., the file maintenance setting. In general, there are two types of file maintenance settings, simple selective maintenance and maintenance of passwords (ciphers) for requirement setting. Here's how to set it up:
...
|
|
Installation tutorial of OTC welding robot I/O board
The wiring method of the physical I/O signal line of the OTC welding robot relay equipment + I/O board is as follows:
1. Cut off the main power supply and circuit breaker on the control equipment.
2. Remove the back panel next to the control device.
...
|
|
OTC Odchi welding robot programming steps
1. Find the operation origin of the OTC welding robot: click "Program" on the setting box, enter 9999, press "Confirm", press "Look Forward", and the yellow displayed on the setting box is the current process.
2. Create an empty ...
|
|
OTC Robot FD-B4 Maintenance Steps:
1. Preparation before robot maintenance
1. Robot oil type: REO about 1000ml, EP2 about 10-30ml, WR2 about 10ml
2. Tools: one technical refueling pump, 4 syringes, oil blotting paper, several plastic bags, waste oil drums, hexagonal wrenches
3. Robot ...
|
|
Four small families of robots - Odihi OTC in Japan
Like Panasonic, OTC robots are also focused on welding, which is related to their beginnings in the welding industry.
Japan OTC Co., Ltd. is active in the policy of "making it easier for users to operate and achieve higher precision welding".
|
|
Structure and function of extreme operation robot - OTC Odichi
1. Sensor system: the primary force sense system (including touch, force and slip, etc.), vision system (including visible vision, infrared vision, X-ray vision, ultrasound vision, microwave vision, etc.). Some extreme robots also have a hearing system. The function of the sensing system is to give remote control ...
|
|
Industrial robots beware of low-end - Oudixi
In recent years, China's industrial robot industry has entered a period of rapid growth, and has become the world's largest shopping mall for six consecutive years. In the development of industrial robots, there was a hot together, the concept of hype that existed at that time, rushed ...
|
|
HOME and transition point teach-in – OTC robots
In the window, click "robotkr210r2700_extra", and then in the menu, under the "Commands" menu, click the command button RobotJog, which guides the manual operation panel to open and move the robot to the appropriate position.
...
|
|
Daily maintenance of stacker crane - Odichi
1. Whether the columns and upper and lower beams are deformed or distorted.
2. The deflection and deformation of the fork up and down, the wear condition of the guide surface and the guide wheel.
3. Whether all kinds of welded components and castings are cracked and corroded.
4. Bolts, ...
|
|
ODC OTC uses the advantages of robotic welding
Welding robots are industrial robots engaged in welding, including cutting and spraying. In recent years, with the development of electronic skills, computer skills, numerical control and robot skills, active welding robots have been used for production since the beginning of the 60s.
|
|
Contact
working hours
