With the increasing number of OTC bot procurement users, the popularity is increasing. Now that more and more factory users are beginning to pay attention to OTC robot products, we may have a brief or in-depth understanding of OTC robot products from the Internet or related exhibitions.
And on the Internet or in exhibitions, some of the OTC robot products we can see are printed with the words DAIHEN instead of OTC, what is going on?
In fact, OTC is a title of Odichi in China, and in Japan, its title is DAIHEN.
Therefore, it is not enough that some OTC robot products have the word DAIHEN printed on them.
However, in general, ODC robot products sold in Chinese mainland will only print the words OTC, not DAIHEN. So when we see an OTC robot product with the word DAIHEN printed on it, we can know that it is a product sold in other regions, or only in Japan.
Normally, we can find most of the robot products with the same model number as DAIHEN but printed with the word OTC, but those that are special to certain areas, we can't find them in the local ODC branch!
In addition, OTC robots are not called OTC in Taiwan, China, but TEC. These companies with different names are in fact selling products from the same company!
|
More on that
|
Introduction to OTC welding robot welding power supply
OTC welding robot as a widely used advanced automatic welding equipment, with high versatility, stable action characteristics, to use the robot to complete the welding task, the engineer only needs to teach the robot once can correctly reproduce the operation of the teaching process. Let the robot do the rest ...
|
|
OTC welding robot programming steps
Step 1: Find an operation origin for the OTC welding robot: click "Program" on the teaching box, enter 9999, press "Confirm", press "Walk to View", and the yellow pole on the teaching box is displayed at that time.
Step 2: Create ...
|
|
The basic principle of the use of spot welding tongs - OTC
Spot welding tong: used to realize the pressurization of the welded workpiece (plate). The welding tongs used by the robot are usually the transformer and the clamp body are installed together to form a whole, which is called "one-piece welding tong". In practical use, it is necessary to make special measures for the welding tong body according to the particularity of the dotting position.
|
|
Types of OTC Welding Robot Wire Feeders
1. The wire feeder is divided into two types: integrated and separated according to the installation method. The wire feeder is installed on the rear of the upper arm of the robot and is integrated with the robot; The wire feeder is installed separately from the robot as a separate type.
Composed...
|
|
Advantages of OTC robot synchronous feeding welding system
The primary advantages of the OTC robot synchronous feeding welding system:
1. The OTC robot synchronous feeding welding system has the ability to complete the ultra-high-speed control wire feeding, and the welding ability of the OTC Welbee welding used is also directly ...
|
|
Introduction to ODC robot chassis technology
The robot chassis carries the fundamental functions of the robot itself, such as positioning, navigation and obstacle avoidance, which can help the robot complete intelligent walking.
|
|
Precautions for the safety production of OTC welding robots
One of the great benefits of welding robots is that they can replace humans in dangerous or harmful environments, preventing injury. Don't think that this is a peace of mind, because at the same time there is another potential risk, which is the occurrence of robot injury accidents. To this end, ...
|
|
Design tips for palletizing robot grippers – OTC Odichi
1. The structure of the conveyor belt feeding at the front end of the claw of the palletizing robot, the roller conveyor belt for bag grabbing generally has a national standard, and the standard interface needs to be selected, and how to complete the belt conveyor belt should be considered.
2. The selection of the palletizing robot model, the robot load can be ...
|
|
OTC welding robot selection welding wire requirements
The robot can be supplied with barrel or disc wire as required. In order to reduce the frequency of replacing the welding wire, the robot should use barreled welding wire, but due to the selection of barreled welding wire, the wire feeding hose is very long, the resistance is large, and the quality requirements such as the stiffness of the welding wire are high.
...
|
|
Welding Robot Weekly Inspection and Maintenance – OTC Odich
1. Wipe the robot's shaft.
2. Check the accuracy of TCP.
3. Check the oil level of the residue.
4. Check whether the zero position of each axis of the robot is accurate.
5. Clean the filter behind the oil tank of the welder.
6. Clean the filter at the inlet of the compressed air.
...
|
|
Introduction to Four-Axis/SCARA Robot - OTC Odichi
Four-axis robotics means that the arms of a four-axis robot can move freely on geometric planes. The "Articulation Manipulator" is optional, i.e. traction freedom in the X, Y, and Z directions, and rotation freedom in the Z direction.
Delta Parallel Robot
...
|
|
Welding Robot - OTC Robot
The reason why welding robots can account for more than 40% of the total number of industrial robots is related to the special industry of welding. Welding, as an industrial "tailor", is a very important means of processing in industrial production.
|
|
Advantages of OTC welding robots in electrode grinding
Generally speaking, welding robots need to be resharpened after a long period of work. This is due to the fact that after many welds by the robot, the shape of the electrode tip may change, i.e. the electrode may be worn, resulting in the welding quality of the robot ...
|
|
The OTC welding robot records the application commands
In order to make the handle mounted on the front of the robot or the welding action, or to read the signal to confirm the workpiece, the instructions (functions) are recorded in the appropriate position in the work program.
In addition, in order to carry out complex jobs, other job programs may be called, or depending on the status of external signals ...
|
|
Structure and function of extreme operation robot - OTC Odichi
1. Sensor system: the primary force sense system (including touch, force and slip, etc.), vision system (including visible vision, infrared vision, X-ray vision, ultrasound vision, microwave vision, etc.). Some extreme robots also have a hearing system. The function of the sensing system is to give remote control ...
|
|
The difference between OTC robot palletizing and depalletizing
The difference between robotic palletizing and depalletizing is that they perform different tasks. Palletizing is the safe stacking of objects together, while destacking is the unpacking of previously stacked objects. Both of these features can improve the output power and reduce the manpower input, and together they also reduce the operational risk and ...
|
|
Daily maintenance of stacker crane - Odichi
1. Whether the columns and upper and lower beams are deformed or distorted.
2. The deflection and deformation of the fork up and down, the wear condition of the guide surface and the guide wheel.
3. Whether all kinds of welded components and castings are cracked and corroded.
4. Bolts, ...
|
|
How to use the OTC robot step return instruction
Find an operation origin for the OTC welding robot: click "Program" on the teaching pendant, enter 9999, press "Acknowledge", press "Trek View", and the current process will flash yellow on the teaching pendant.
OTC Welding Robot Programming Process Tutorial Step 2:
Create an empty program ...
|
|
Welding technology for ODICHI MAG welding
1. Insist on 1/4-3/8 inch wire rod elongation (the length of the wire protruding from the torch head).
2. Use small diameter welding wire when welding thin plates; When welding thick plates, large diameter welding wire and high-current welding machine are used. Check out the detailed performance of the welder recommendation.
...
|
|
Robot interrupt function processing - OTC Odichi
Interruption means that in the process of computer operation, when there is some unexpected situation that requires the intervention of the host, the machine can automatically stop the running program and transfer to the program that deals with the new situation, and return to the original suspended program to continue to run after processing.
...
|
|
Contact
working hours
