Advantages of OTC welding robots:

Generally speaking, welding robots need to carry out electrode grinding operations after long-term operation. This is due to the fact that after the robot has been welded repeatedly, the shape of the electrode tip may change, that is, the electrode will be worn, resulting in the welding quality of the robot.

1. Handheld robot deburring things Handheld robotic deburring stuff is a common and flexible type of stuff. They usually consist of a robotic arm and an end effector equipped with a deburring tool. These things allow the operator to hold the robot in the hand where the need ...

1. Whether the columns and upper and lower beams are deformed or distorted. 2. The deflection and deformation of the fork up and down, the wear condition of the guide surface and the guide wheel. 3. Whether all kinds of welded components and castings are cracked and corroded. 4. Bolts, ...

The maintenance content of the robot is mainly to replace the smooth oil of the six shaft reducers and the smooth oil of the J4 shaft gear shaft, the replacement of wearing parts, the operation status of each module in the control cabinet, and the wear and tear of each cable in the control cabinet. If the grease is not replaced for a long time, the six axes of the robot will be formed.

Four-axis robotics means that the arms of a four-axis robot can move freely on geometric planes. The "Articulation Manipulator" is optional, i.e. traction freedom in the X, Y, and Z directions, and rotation freedom in the Z direction. Delta Parallel Robot ...

Industrial robots are general-purpose programmable machines with solid anthropomorphic properties. Robotic arms are a common feature of industrial robots and can be used to perform a variety of industrial missions. In addition, industrial robots have automated systems, the ability to make decisions, communicate with other machines, and respond to ...

1. Shut down and restart. 2. After the shutdown and restart are invalid, remove the sequence board and reinstall it. 3. If it still doesn't work, switch the IPM board with other machines to verify whether it is Sequence...

In order to make the handle mounted on the front of the robot or the welding action, or to read the signal to confirm the workpiece, the instructions (functions) are recorded in the appropriate position in the work program. In addition, in order to carry out complex jobs, other job programs may be called, or depending on the status of external signals ...

1. Touching part The sensory part is like the five senses of human beings, providing a sense for the robot's operation and helping the robot's operation process to become more accurate. This part can be divided into two main systems: (1) Sensory system Feeling...

1. According to the problem situation, that is, the alarm code to find the reason Usually the teach pendant is also called a programmer (the prompt on the teaching box) to roughly determine where the problem occurs. For example, we see the alarm A5032 on the teach pendant, indicating that the encoder is faulty. So according to our ...

Relying on the technology stack of OTC robots and the advantages of automation, OTC can create a set of automated operation systems for customers that use robots to realize from bolt picking to bolt locking agent application and tightening screws. This...

The robot chassis carries the fundamental functions of the robot itself, such as positioning, navigation and obstacle avoidance, which can help the robot complete intelligent walking.

Fiber laser welding robot is now widely used in the metal processing industry, as a new era of automated production equipment, fiber laser welding robot with high production efficiency, high precision, high welding strength, small workpiece deformation and narrow welding gap gradually replaced the manual ...

1. The OTC robot synchronous feeding welding system has the ability to complete the ultra-high-speed control wire feeding, and the welding ability of the OTC Welbee welding used also directly depends on the welding current, and the OTC robot synchronous feeding welding system can also perform synchronous control! ...

Collective robots are teamwork-oriented, and they are well suited for applications that meet the following needs: 1. Mission needs include massiveness Collective robots are well suited for large-scale operations including large-area projects ...

Six-axis industrial robot is a commonly used 6-joint industrial robot in practice, six-axis robotic arm, six-joint manipulator, six-axis robotic arm, robotic arm, etc. are its name, industrial robots generally refer to four-axis, five-axis, six-axis manipulator. The joint structure of each robot ...

1. High-precision packaging operations can be carried out According to the integration of palletizing robots and other machinery and equipment, the original redundant packing operations can be completed by intelligent robots, which saves a lot of manpower for the company and makes the company move towards intelligent production and production operations.

1. The welding fixture of the OTC welding robot has the characteristics of agile action and convenient operation. The operation orientation should be located in a position that is easily accessible and accessible to workers. When the robotic welding fixture is in a clamping condition, it should be able to self-lock. ...

1. The only warranty in the industry for 3 years (body, control box, teaching box, operation box, control cable); 2. Full Chinese operation interface, simple and easy to understand, and can support 6 language selection; 3. Long working radius, standard welding robot working radius up to 1.4 meters or 2 meters (not...

1. Push wire feeding method. This kind of wire feeding structure is relatively simple, light weight, and convenient operation and maintenance. However, the wire feeding hose is relatively long, the resistance is greater in the process of wire feeding, the wire feeding process is unstable, and the welding power is simply affected.