Ottonix Information SHOW

	Principle and application field of Ottonix panel table Panel meter, also known as the dial table or meter head, the full name is the panel device instrument (panel device instrument), English Panel Meter. Because this kind of instrument device is fixed on the surface of the equipment for viewing and operation, it is called a panel table, which is a functional part of the screen equipment. ...
	Pressure Sensor Fault Detection – Ottonix First, the first component is blocked or the form of the device is wrong, and the pressure point is unreasonable, so we often emphasize that the device must be the correct device, once it is installed wrongly, or it is not well installed, it will bury endless hidden dangers for the back. What are the primary components? Orifice plates, remote transmission measuring joints, etc.
	Torque Transducer Classification – Ottonix Torque sensor is the necessary device in some products, mainly used to measure the speed and point of view, but different types of sensors, the use of methods and effects are different, so what are the classifications of torque sensors? ...
	Calibration process of a tension transducer – Autotonics 1. Plug in the force sensor you want to calibrate, such as a force sensor with a range of 50kg, and select a force sensor channel on the left; 2. Enter the range of the sensor in the "range" input box, such as "50" kg; 3. Enter the zero value force of the sensor in the "zero value" input box, generally enter ...
	Proximity switch performance characteristics and classification - Autonicx Proximity switch, also known as non-contact travel switch, in addition to being able to complete stroke control and limit protection, is still a non-contact detection device, used to detect the size of parts and speed measurement, etc., and can also be used for the active connection of frequency conversion counters, frequency conversion pulse generators, liquid level control and processing programs.
	Linear displacement sensor fault and treatment method - Autonics 1. If the electronic ruler is used for a long time, the seal is aging, there are many impurities, and the water mixture and oil will seriously affect the contact resistance of the brush, resulting in the continuous beating of the display. At this moment, it can be said that the electronic ruler of the linear displacement sensor is now damaged and needs to be replaced. ...
	Wiring of the load cell – Autonex The load cell can be wired in two different ways with input and output: One is the four-wire connection method The load cell of the four-wire connection method has no special requirements for the secondary instrument panel, and it is very fast to use, but when the cable is long, it is very easy to be affected by the working temperature.
	Autonex BD series laser displacement sensors BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, twist and flatness of the target object by detecting the displacement. Regardless of the color or data of the policy, the sensor can provide accurate and stable measurement results. Sensor head and amplifier unit ...
	How to choose a pressure sensor fitting – Ottonix At present, there are not many single ferrule terminal joints on the market, and most manufacturers are using double ferrule terminal joints, and the market price is about 9-18 yuan, and the price is different according to different types. Fittings, whether they are double ferrule end fittings or single ferrule end fittings, are all ...
	Performance Indicators and Characteristics of Load Cells – Autotonicus Performance indicators of load cell: 1. Dynamic characteristics, 2. Linearity, 3. Hysteresis characteristicsDynamic characteristics refer to the output characteristics of the sensor when the input changes. In practice, the dynamic characteristics of a sensor are generally used to indicate how well it responds to certain specification input signals. This is because the sensing ...
	Position sensor key term – Ottonix Incremental sensors Only bearing change information is provided so that the practice bearing is unknown at startup. Each time the index is made/marks the zero or zero bit of the signaling community. Detected in the homing procedure. Regarding the commutation of brushless motors, motors generally have three magnetic Hall sensors, which are ...
	A type of non-contact liquid level sensor – Autonex Capacitive level sensors, ultrasonic level sensors, and discrete photoelectric level sensors. The common development of these three non-touch level sensors is that they are not affected by the color, corrosiveness, pressure, density, etc. of liquids, because these sensor technologies cannot directly cause problems with liquids.
	Classification and working principle of proximity switches – Autonex According to the different operating principles, it can be divided into inductive type, capacitive type, photoelectric type and magnetic inductance type. According to the type of circuit current, it can be divided into AC type and DC type. The inductive head of an inductive proximity switch is an inductive coil with a ferrite core, which can only detect metal bodies. Raise...
	Pressure sensor influencing measurement results factor – Ottonix Pressure is an important parameter in pneumatic, fluid or other measurements, so pressure sensors have been widely used in various experimental measurements, product testing, and automatic control systems, and the stability of the product is a major consideration when purchasing pressure sensors. ...
	Classification and advantages and disadvantages of infrared sensors – Autonex Infrared sensors include an optical system, a detection element, and a conversion circuit. Optical systems can be divided into two categories: transmissive and reflective according to different structures. According to the working principle, the detection element can be divided into thermal detection element and photoelectric detection element. The most widely used thermistors are thermistors. Thermistor...
	Pressure sensors in servo presses – Autonex The pressure sensor in the servo press is built-in, which can ensure that the force on the spindle is not affected by the radial separation force, avoid part of the load in the installation, do not directly connect the workpiece, and is not easy to damage. High-speed rings of ...
	Load cell structure and function – Ottonix Load cells are used to measure weight and can be found everywhere in our daily lives, such as at supermarket counters or on highways. Load cells generally consist of elastomers with strain gauges. Elastomers are generally made of steel or aluminum. It is very robust and has very little elasticity. ...
	High Temperature Pressure Sensor Accuracy Affects - Autonex A high-temperature pressure sensor is a sensor that converts pressure into an electrical signal output, which usually consists of two parts, namely a sensitive element and a conversion element. The sensitive element refers to the part of the sensor that can directly feel or respond to the measurement; The conversion element refers to the sensitive element in the sensor ...
	Advantages of digital load cells – Autonex 1. The transmission interval of the digital load cell is long, the communication speed is fast, and the anti-cheating effect is remarkable; The output signal of the traditional analog load cell is small, generally millivolt level, and the signal is still lost due to the damage of the cable resistance during the transmission process, and it is also very simple to be affected by the surrounding environment.
	Pressure sensors can't avoid errors – Ottonix When choosing a pressure sensor, we should consider his inductive accuracy, and what are the aspects that affect the accuracy of the pressure sensor? In fact, there are many factors that form sensor errors, and let's pay attention to four unavoidable errors, which are the initial errors of the sensor. ...
	Installation steps for dynamic torque transducers – Autonex Dynamic torque transducers can be used in the manufacture of viscometers, electric (pneumatic, hydraulic) torque wrenches, which have the advantages of high precision, fast frequency response, good reliability and long life. Installation process: 1. According to the connection form of the shaft and the length of the dynamic torque sensor, determine the original ...