1. The transmission interval of the digital load cell is long, the communication speed is fast, and the anti-cheating effect is remarkable; The output signal of the traditional analog load cell is small, generally millivolt level, and the signal is still lost due to the damage of the cable resistance in the transmission process, and it is also very simple to be damaged by the surrounding environment, so it can not complete the long-distance transmission.
2. Strong anti-disturbance ability, high reliability and good lightning protection performance; The power supply that mimics the sensor is output from the surface, and the quality of the power supply is damaged by the appearance. They are also easily damaged by electromagnetic disturbances and surges. The instability of the power supply also causes great damage to the output of the sensor, which is very simple to cause the instability of the output, and the transient high voltage will also cause damage to the sensor. The digital sensor uses new welding manufacturing skills, and it is also filled with a helium protection circuit, and the protection level is very high.
3. The digital load cell is removed and calibrated; When the load cell is taken to the site, there is no suitable counterweight system, and it is generally difficult to complete the calibration, and if it is not calibrated, the error will be very large. Due to the loss of the analog sensor in the field connection process, the field calibration is completed. The digital sensor is relieved of this work, as it has been calibrated in production with a standard force measuring machine, and its output corresponds to the standard value.
|
More on that
|
Autonics Single Display PID Temperature Controller TR1D Series New Product Released
The TR1D series has a high-speed sampling period of 50ms and a display accuracy of ±0.3% for more accurate temperature control. Simultaneous heating/cooling control is available to provide effective temperature control. With a width of only 22.5mm, the product minimizes the limitation of installation space and can be accessed with ...
|
|
Factors that contribute to sensor errors – Ortonix
The first is the offset error: since the high-frequency pressure sensor maintains a stable straight offset over the entire pressure range, the change in converter diffusion and laser adjustment correction will cause the offset error.
The second is the sensitivity error: ...
|
|
Autonex proximity switch PRD/PRDW series
Autonex cylindrical remote proximity switch PRD/PRDW series, the selection of self-developed special IC, with the highest international noise immunity level, high echo frequency, low leakage current and residual voltage, the detection interval is 1.5-2 times of the original product, close to the switch and the cable connection part of the selection of strong ...
|
|
Proximity switch performance characteristics and classification - Autonicx
Proximity switch, also known as non-contact travel switch, in addition to being able to complete stroke control and limit protection, is still a non-contact detection device, used to detect the size of parts and speed measurement, etc., and can also be used for the active connection of frequency conversion counters, frequency conversion pulse generators, liquid level control and processing programs.
|
|
Autonex TR1D series temperature controller features
The TR1D series has a high-speed sampling period of 50ms and a display accuracy of ±0.3%, which can complete more accurate temperature control. Heating/cooling can be operated together to provide useful temperature control. With a width of only 22.5mm, the product minimizes the limitation of installation space and can be passed through ...
|
|
Sensors in the neighborhood of life applications
The sensor is a kind of detection device, which can feel the measured information, and can transform the felt information into an electrical signal or other required form of information output according to certain rules, so as to meet the requirements of information transmission, processing, storage, display, recording and control.
...
|
|
Gas Sensor Failure Analysis – Ottonix
A gas sensor is a converter that converts the volume fraction of a gas into an electrical signal. We will inevitably encounter some problems when using gas sensors, and we have analyzed them as follows:
1. How long does it take for the gas sensor to be used and then calibrated again: the initial calibration ...
|
|
Performance Indicators and Characteristics of Load Cells – Autotonicus
Performance indicators of load cell: 1. Dynamic characteristics, 2. Linearity, 3. Hysteresis characteristicsDynamic characteristics refer to the output characteristics of the sensor when the input changes. In practice, the dynamic characteristics of a sensor are generally used to indicate how well it responds to certain specification input signals. This is because the sensing ...
|
|
Autonics BH series photoelectric sensors
The BH series photoelectric sensors can be used with M18 fixing nuts and fixing nuts for frontal equipment, or with M3 bolts and nuts for peripheral equipment. Sensitive equipment options promise easy application in a variety of industrial environments. The sensor can be equipped with a simple wire to generate individual or simultaneous N...
|
|
The difference between Autotonics switching power supply and module power supply
Modular power supplies are power supplies that can be mounted directly on a printed circuit board and feature power supply to application-specific integrated circuits (ASICs), digital signal processors (DSPs), microprocessors, memory, field-programmable gate arrays (FPGAs), and other digital or analog loads. One...
|
|
Precautions for the use of through-beam photoelectric sensors - Autonex
1. Avoid strong light sources
Photoelectric sensors can generally operate stably when the ambient illumination is high. However, avoid facing the optical axis of the sensor with strong light sources such as sunlight and incandescent lamps. When the angle of the optical axis of the sensor (light receiver) and the strong light source cannot be changed, the sensor can be surrounded by ...
|
|
TZ4ST-24R Autonox Thermostat Advantages:
Dual PID auto-adjustment function
There are high-speed response modes and slow reaction modes in the PID function.
When you want to reach the desired value quickly, use the high-speed mode (PIDF mode)
When you want to minimize overshoot, use slow mode (PIDS mode)
...
|
|
Introduction to Digital Fiber Optic Sensors
Digital fiber optic sensors convert measured objects into measurable optical signal sensors. Its working principle is to send the incident beam of the light source to the modulator through the optical fiber, and interact with the internal and external measurement parameters of the modulator to form a dimmable signal. Digital Fiber Optic Sensors ...
|
|
Linear displacement sensor fault and treatment method - Autonics
1. If the electronic ruler is used for a long time, the seal is aging, there are many impurities, and the water mixture and oil will seriously affect the contact resistance of the brush, resulting in the continuous beating of the display. At this moment, it can be said that the electronic ruler of the linear displacement sensor is now damaged and needs to be replaced.
...
|
|
Autonics Solid State Relay SSR adds SR(H)2/3 three-phase
Autonics Solid State Relay SSR adds SR(H)2/3 three-phase solid state relay to its family of relays
Autonex proudly introduces you to the new formation of solid state relays, three-phase solid state relays. Compact design, flexible devices, easy ...
|
|
Autonicx brought a full range of innovative products to the fair
On November 4, 2014, Ortonicus attended the 2014 Industrial Automation Exhibition held at the Shanghai New International Expo Center. With the theme of "high-end, intelligent and green", this exhibition has a total of CNC machine tools and metalworking exhibition, industrial automation exhibition, industrial robot exhibition, new energy and electric ...
|
|
The working principle of Autonex photoelectric switches
1. After the modulation pulse generated by the vibration circuit passes through the reflection circuit, the digital integration photoelectric switch or RC integration method is used to eliminate the disturbance, and finally the driver is triggered by a delay (or no delay) to output the photoelectric switch control signal.
2. Use optical elements to make the beam in the middle of the propagation medium.
|
|
How to choose a pressure sensor fitting – Ottonix
At present, there are not many single ferrule terminal joints on the market, and most manufacturers are using double ferrule terminal joints, and the market price is about 9-18 yuan, and the price is different according to different types. Fittings, whether they are double ferrule end fittings or single ferrule end fittings, are all ...
|
|
Autonex BD series laser displacement sensors
BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, bending, and flatness of the target object by detecting the displacement.
Regardless of the color or material, the sensor provides accurate and reliable measurement results. Sensor head and amplifier unit ...
|
|
Precautions for the use of Autotonics safety light curtains
Cover the safety light curtain with your hands and observe whether the indicator light conversion is normal.
During the use of the punch photoelectric protection device, the orientation of the photoelectric protection device shall not be changed at will.
In the protection zone, the light curtain should be blocked by hand, and the machine should be able to stop the operation immediately.
...
|
|
Contact
working hours
