1 Common gear reducer
Common gear reducers are very common in the customer's mechanical drive process in the factory. It uses two gears of two similar shaft devices to accomplish the mission of transmitting power and deceleration. This type of reducer has a lever and cam as well as some ball bearings.
Common gear reducers can supply a wide range of different reduction ratios and then supply the appropriate rotational speed for a wide range of machines, vehicles and equipment. They are simple to maintain and have a long service life.
2 Planetary reducers
A planetary reducer is a reducer structure that is generally used to cope with the needs of high torque and low speed output. It consists of a circular gear (the sun gear) and several gears that rotate around it (planetary gear). In this system, the input shaft rotates the sun gear, and the planetary wheel slides between the sun gear and the fixed support, which then changes the speed and torque of the output shaft.
For applications that require high torque and low speed output, planetary gearboxes are a great solution. It has high durability and reliability.
3 Bevel gear reducer
Bevel gear reducers generally use right-angle transmission to accomplish high torque requirements. It consists of two axes that intersect at right angles. In the meantime, a drive gear is installed on one shaft for rolling one of the two bevel gears. The other side of each bevel gear engages with the output shaft, which then fulfills the mission of rolling the output shaft. Bevel gear units have very high reliability and durability and operate under very high loads.
4 Spiral bevel gear reducer
Spiral bevel gear reducer is a messy reducer structure, which is composed of bevel gears, helical gears, matching shafts and couplings. If you need to output more torque in high load and low speed environment, then this reducer will be a good choice. In addition, because of its messy structure, spiral bevel gear reducers generally have a higher cost.
|
More on that
|
The DENSO robot has a built-in vision connection method
Hardware articulation method
If it is a USB camera (IDS), it is connected to the USB port of the robot controller.
In the case of GigE cameras (Basler) and network cameras (Canon), they are connected to the LAN port of the robot controller through the HUB during punctuality, and directly connected to the machine during execution.
|
|
Advantages and Limitations of Welding Robots - Denso Robots
The development of science and technology has changed the safety of robots and harmed the environment. It's best to work with job quality and developers. Functional requirements meet, change, and add to the high demands of the market. As an active cleaning thing, the automation and information level of the robot cleaning shop has been improved.
|
|
The DENSO Robot Selection Table provides a quick overview of DENSO robots
As a world-renowned manufacturer of automotive parts, DENSO not only develops DENSO robots, but also uses them. Denso is developing unique products based on the high level of technical expertise and adaptability it has cultivated in the development of automotive parts. DENSO not only puts DENSO machines ...
|
|
Denso robotic arm battery issues
1. Summary of Denso robotic arm battery problems
The controller error code 2013 is displayed, and the query result is the controller backup battery replacement time. The solution given is to replace the backup battery and set the next time for the inspection.
2 ...
|
|
DENSO's new DENSO VS series of aseptic robots
DENSO Robotics announces the launch of its new compact, high-speed, VS-050 six-axis aseptic robot with ISO 5 cleanroom rating and specially planned masking for use that requires biofouling manipulation.
DEN ...
|
|
Cybernetics in mobile robots – DENSO robots
1. Mobile robot motion control
"The world's martial arts, only fast is not broken", mobile robots generally control the wheels through the motor to complete the movement. As the end fulfillment mechanism, the motion control of the motor requires fast response (millisecond-level echo time) and high precision. Now, the typical motor ...
|
|
DENSO installs safety fences
About the robot body, please mark the axis name and the direction of movement of each axis in an eye-catching azimuth. The symbol should be consistent with the direction of the practical action. If the symbol is not signed, or if the symbol is in the wrong direction, it may cause personal injury or property damage due to misoperation.
Change the composition
Change or add ...
|
|
Industrial robots often calibrate the cause – Denso
To calibrate a robot, we first need to understand the factors that may cause the robot to go wrong.
There are many factors that form robots to produce errors, and there are two main categories, one is kinematics, and there are processing errors, mechanical service/installation errors, ...
|
|
Features of DENSO's intelligent welding robots
Automation: Intelligent welding robots can actively perform welding tasks according to preset welding procedures and parameters without manual intervention. It is able to work continuously and increase the output power.
Precision: Intelligent welding robots use high-precision sensors and control systems to achieve precise ...
|
|
Classification of joint robots - Denso robots
Articulated robots, also known as articulated arm robots or articulated robotic arms, are one of the most common shapes of industrial robots in today's industrial sector and are suitable for mechanical automation operations in many industrial sectors. For example, automatic installation, painting, transfer, welding and other operations, according to the structure of it ...
|
|
DENSO Robot WINCAPS III. Change the password
1. Select "Re-login" from the "Tools" menu.
THE LOGIN TO WINCAPS III. DIALOG BOX APPEARS.
2. Click the "Change" button.
The Change Cipher dialog box appears.
3. Enter ...
|
|
The operating principle of servo motors – DENSO robots
Communication servo motors are usually single-phase asynchronous motors, with two structural modes: squirrel cage rotor and cup rotor. Like ordinary motors, AC servo motors are also composed of stators and rotors.
There are two windings on the stator, namely the excitation winding and the control winding, and the two windings are in the space ...
|
|
DENSO has released a new entry-level large-scale parts assembly robot
At ATX West, the 2020 World Automation Skills Expo in Anaheim, United States, DENSO Investment Co., Ltd., headquartered in Japan, showcased a new series of high-performance industrial robots for entry-level manufacturers capable of manufacturing large parts.
...
|
|
The structure of the industrial robot control system - Denso robot
Teaching box: The operation trajectory and parameter setting of the teaching robot, as well as all human-computer interaction operations, has its own independent CPU and storage unit, and realizes information interaction with the main computer in a serial communication mode.
Operation panel: Composed of various operation buttons, status indicators...
|
|
DENSO robot maintenance method
1. Maintenance spare parts
1. Lubricating grease
2. Maintenance spare parts
Memory backup battery, encoder backup battery, fuse
2. Ontology maintenance
Routine check-ups
1. The body is clean
According to the site ...
|
|
Robot Application Considerations – Denso Robots
1. Robot selection
An industrial robot is a complex system, including manipulators, control systems, programmers and other software and accessories. Before use, it is necessary to select according to the actual production requirements of the enterprise, and choose the products suitable for their own production line. The principle of selection is ...
|
|
Daily maintenance and maintenance of welding robots - DENSO robots
One. Daily viewing and protection
1. Wire feeding organization. Including whether the wire feeding force distance is normal, whether the wire feeding catheter is damaged, and whether there is an abnormal alarm. 2. Whether the gas flow rate is normal. 3. Whether the welding torch safety protection system is normal. (It is forbidden to close the welding torch safety protection work) 4. Water cycle system work ...
|
|
DENSO manipulator program creation steps
STEP1: WINCAPS III. IS ACTIVATED
LAUNCH WINCAPS III.
For details, please refer to "Chapter 3 Activation and Completion (P.11)".
STEP2: Creation of the project
Create a project based on the robot you are using (necessary data).
For more information, please refer to ...
|
|
How to start robot automation correctly – DENSO robots
For small and medium-sized enterprises and large manufacturers, robot automation can help them improve power and work quality, reduce operating costs and improve sensitivity as long as they have the right equipment. Before deploying initiatives, companies must draw up a complete strategic plan. They need to understand the proactive ...
|
|
Offline programming of DENSO robots
For offline programming of Denso robots, RoboDK supports the following two programming languages:
In addition, RoboDK's Denso robot driver supports online programming of the RC7 and RC8 controllers. Other versions of the controller may be partially supported.
Robot-driven ...
|
|
Contact
working hours
