1. Robot selection
An industrial robot is a complex system, including manipulators, control systems, programmers and other software and accessories. Before use, it is necessary to select according to the actual production requirements of the enterprise, and choose the products suitable for their own production line. The selection criteria include cost-effectiveness, environmental conditions, technical parameters (load, number of axes, working range, protection level), service, etc. As long as the right one is selected, the talents can give full play to the strengths of the robot and create the greatest value with the minimum cost.
2. The robot uses the control of the cost
Different from traditional production, once a single machine fails in an automated assembly line, it will directly lead to the shutdown of the entire production line, limiting the continuity of production. Under this requirement, it is necessary for the robot to have high stability and good continuous production, and it is also necessary for us to "know how to use" and "use it well".
In the traditional production mode, the production efficiency and work quality depend on the proficiency and experience of the workers, while the robotized automatic line relies on the skills and quality of the operators, the storage of skilled personnel and the maintenance of equipment. The storage of skills and equipment operation and maintenance personnel is directly related to the use of robots, and enterprises should store reasonable personnel according to the status quo of their products, process complexity, and the number of robots. At the same time, improve the technical and professional skill level of personnel, protect and maintain the robot reasonably and regularly, so that it can be maintained in excellent working condition, reduce the downtime rate and maintenance costs, and create high value for the enterprise.
3. Reasonable robot tooling and fixture
The robot is like our "brain", and the fixture is like our "hands", so the planning and selection of tooling fixtures is particularly important.
The planning and selection of fixtures need to take into account the fixture components, functions, positioning, etc., the positioning point of the fixture in these elements is the basis for the precise operation of the robot. On the contrary, if the positioning point of the fixture is accurate and adapted to the corresponding function, it will achieve twice the result with half the effort.
|
More on that
|
Robot assembly system workpiece assembly method - Denso robot
Traditional robotic device systems are now widely used in many mass production industries. The design of these robot device systems is mainly based on the high-precision control environment, and when assembling large components, multiple robots are required to work together, and only in this way can they effectively transfer the ...
|
|
Welding robot, weld seam tracking and positioning-DENSO robot
Strictly speaking, the welding robot weld tracking and positioning system consists of two parts: before welding, the weld positioning function is tested to see whether the gap is suitable and accurately reaches the welding joint point; Real-time monitoring of welds and monitoring of product deformation during welding.
...
|
|
Programming, debugging and simulation of industrial robots - DENSO robots
After learning the manual control, we have to start learning how to program the robotic arm to work actively according to the program we have written. At this stage, we need to learn the fundamental instructions and functional functions of the robot, and the content of this stage is slightly more difficult than the previous stages.
|
|
What is an Assembly Robot? - Denso
The installation robot is the central equipment of the flexible automatic installation system, which is composed of a robot manipulator, a manipulator, an end actuator and a sensing system. Among them, the structure types of the manipulator include horizontal joint type, Cartesian coordinate type, multi-joint type and cylindrical coordinate type; The controller generally chooses multi-CP ...
|
|
Denso automatic welding method
In modern manufacturing, welding has become an indispensable process. With the advancement of science and technology, welding has also undergone great changes. One of the most important aspects is the automation of welding.
The emergence of welding automation can not only greatly improve the power of welding.
|
|
Launch of the DENSO robot DENSO rc8A controller
Here, the main thing is to connect the power supply of the robot controller and motor, and use the multi-function trainer to manually run the robot.
Step 1
Acknowledging security
●Acknowledging that the robot's device is in normal condition.
● Acknowledge that there are no personnel within the robot's range of action.
Section 2 ...
|
|
The cause of circuit board failure of industrial robots - Denso robots
1. Many parameters in the circuit board of the industrial robot are adjusted by software, and the margin of some parameters is adjusted too low, which is in the critical range.
...
|
|
The DENSO robot DENSO rc8A controller starts
Here, the first thing is to turn on the power supply of the robot controller and motor, and use the multi-function trainer to manually run the robot.
Step 1
Acknowledging security
●Acknowledging that the robot's device is in normal condition.
● Acknowledge that there are no personnel within the robot's range of action.
...
|
|
DENSO robotic arm repair
DENSO Japan Denso robotic arm and other industrial robot (FA equipment) products include: vertical multi-joint manipulator, horizontal multi-joint (SCARA) manipulator, Cartesian coordinate manipulator, built-in manipulator and manipulator controller.
...
|
|
The DENSO robot has a built-in vision connection method
Hardware articulation method
If it is a USB camera (IDS), it is connected to the USB port of the robot controller.
In the case of GigE cameras (Basler) and network cameras (Canon), they are connected to the LAN port of the robot controller through the HUB during punctuality, and directly connected to the machine during execution.
|
|
Robot motor type – DENSO robot
There are multiple categories of robot motors, each with subtypes, each with its own applications and benefits.
Robotic actuators
Pneumatic actuators: These actuators use compressed air to function. Only a few active parts ...
|
|
How to start robot automation correctly – DENSO robots
For small and medium-sized enterprises and large manufacturers, robot automation can help them improve power and work quality, reduce operating costs and improve sensitivity as long as they have the right equipment. Before deploying initiatives, companies must draw up a complete strategic plan. They need to understand the proactive ...
|
|
The key technology of laser processing robot - DENSO robot
Laser processing robot is to apply robot skills to laser processing, and complete a more flexible laser processing industry through high-precision industrial robots. The system can be operated online through the teaching pendant box and can also be programmed offline. The system is automatically inspected for the workpiece to be processed.
|
|
The Denso Denso robot is connected to each part
1. CN5: Portable programmer
2. CN7: I0 Power (if you need to connect the output port and Robot Stop, Enable Stop import and export)
3. CN8: Import import, please connect with Denso import ...
|
|
Robots with large loads affect efficiency and stability reasons
For traditional robots, it will be more difficult to control the robot with a large load, which greatly affects the efficiency and stability of the robot.
The main reasons for this are as follows:
(1) The traditional robot encoder is installed in the reducer input ...
|
|
The type of electric motor in the robot drive system - Denso robots
The motors used in the drive system of industrial robots can be roughly subdivided into the following types:
1. Communication servo motors, including synchronous communication servo motors and reactive stepper motors.
2. DC servo motor ...
|
|
Automated robots at the DENSO Expo steal the spotlight
The "2013 China Electronic Equipment Industry Expo" hosted by Shenzhen Electronic Equipment Industry Association was held in Shenzhen on August 7-9. A number of leading industrial enterprises displayed new materials, skills and intelligent equipment products, and a variety of high-precision and automated robot products were unveiled. Profilers point out that ...
|
|
The way the wrist moves of an industrial robot
Industrial robots are an important part of modern industrial production, and their role in the production line cannot be ignored. The wrist of the robot is one of the key parts of the robot, which determines the type and precision of the mission that the robot can complete. There are many ways to move the wrist of industrial robots, and each ...
|
|
Denso HSR high-speed 4-axis robot
DENSO Robotics announces the launch of its new HSR four-axis SCARA robot, which features advanced oscillation control, a newly planned, highly rigid lightweight arm and improved heat dissipation at the base to operate continuously at the highest additional speed. Achieve successive high-speed performance and repeatability ...
|
|
How did Japan carry out the transformation of the New Four Modernizations?
Under the new four modernization trends, the number of auto parts will be significantly reduced. Therefore, in the recent standardization of automotive hardware, the proportion of hardware revenue and profit is gradually declining, and the development capability of software-defined vehicles will become the core competitiveness in the future. The proportion of new automotive software talents is high, and the new automotive software has a high proportion of latecomers.
|
|
Contact
working hours
