1. The arrangement and arrangement of the parking airport should ensure that the entry and exit of any manipulator is not affected by other manipulators.
2. It should be parked in a dry room. Those who have the necessary need to park outside should pick a flat ground and lay it with planks. After parking, cover with a covercloth.
3. Before long-term storage, it is necessary to maintain the manipulator. Repair the damaged parts and clean them up completely, keeping them in good condition.
4. The fuel control lever of the manipulator should be placed in the idle position and the joystick should be placed in the neutral position.
5. Anti-rust treatment. (OTC Welder Machine)
(1) Before storage, it should be determined whether to repair the paint or re-paint the whole machine according to the size of the area where the anti-rust paint peel falls off on the surface.
(2) The working device of the construction manipulator, such as the screed of the paver, the bucket of the loader, the scraper of the grader, etc. The way to prevent rust on exposed metal is to apply butter. Precautions for long-term storage of construction manipulators.
6. Storage of OTC initiators.
(1) Release the cooling water in the initiator.
(2) Replace the engine oil. The new oil is usually neutral and does not corrode the metal parts of the initiator.
(3) The fuel tank is filled with diesel fuel to avoid rust. If the conditions are agreed, preservatives should also be added.
(4) (OTC welding machine) start the machine once a month during the shutdown period, so that the machine travels a short distance, and establishes a new oil film at the smooth parts to avoid rust. Note: Fill up with cooling water before starting and fill up with cooling water at the end.
7. Store the battery.
(1) The battery should be removed and placed in a dry and freeze-proof place. Keep the appearance clean and dry, and it is strictly forbidden to place conductive objects on the battery. When disassembling the battery, first block the negative wire, and then intercept the positive wire; Connect the positive wire before installation, and then connect the negative wire. Because the electrical system of the construction manipulator is a negative electrode iron, this is to avoid a short circuit when disassembling the battery.
(2) Lead-acid batteries should be charged once a month.
|
More on that
|
Industrial robot system composition - OTC robot
(1) Control computer: the dispatching and command organization of the control system. Generally, microcomputers and microprocessors have 32-bit, 64-bit, etc.
(2) Teaching box: Teaching robot working trajectory and parameter setting and all human-computer interaction operations, with its own independent CPU and storage unit, and ...
|
|
Odich at the 25th Essen Welding & Cutting Exhibition
On June 16, 2021, the 25th Beijing · Essen Welding and Cutting Exhibition kicked off at the Shanghai New International Expo Center. Oudixi brought welding products, solutions and handling robots to this exhibition, bringing new possibilities for welding.
...
|
|
Robot maintenance content - OTC Odichi robot
The maintenance content of the robot is mainly to replace the lubricating oil of the six shaft reducers and the lubricating oil of the J4 shaft gear shaft, the replacement of wearing parts, the operation of each module in the control cabinet, and the wear of each cable in the control cabinet.
Long time without ...
|
|
Processing method of involuntary walking of OTC robots
Fault phenomenon: Manual operation is normal. After switching to automatic mode, the intermittent red light does not stop, but pressing strat once will make the program trek one step.
Solution: Because the working mode of the machine is changed to one step intermittent, please ...
|
|
HOME and transition point teach-in – OTC robots
In the window, click "robotkr210r2700_extra", and then in the menu, under the "Commands" menu, click the command button RobotJog, which guides the manual operation panel to open and move the robot to the appropriate position.
...
|
|
The general trend of industrial robot technology development - Odixi
Industrial robot is a multi-joint manipulator or multi-degree of freedom intelligent machine device for the industrial category, which can perform work automatically, and is a kind of machine that relies on its own power and control ability to instigate various functions. Not only can it be commanded by humans, but it can also operate according to pre-programmed procedures.
|
|
OTC fastening screw robot system
Relying on the technology stack of OTC robots and the advantages of automation, OTC can create a set of automated operation systems for customers that use robots to realize from bolt picking to bolt locking agent application and tightening screws.
This...
|
|
The OTC welding robot records the application commands
In order to make the handle mounted on the front of the robot or the welding action, or to read the signal to confirm the workpiece, the instructions (functions) are recorded in the appropriate position in the work program.
In addition, in order to carry out complex jobs, other job programs may be called, or depending on the status of external signals ...
|
|
OTC Robot Tightening Screw Robot System
With the accumulation of OTC robot technology and the advantages of automation, OTC can create an automated work system for customers from bolt picking to bolt locking agent application and tightening screws using robots.
This...
|
|
The robot vision system consists of a part - OTC Odihi
The robot vision system is generally composed of optical systems (light sources, lenses, industrial cameras), picture acquisition units, picture processing units, actuators and human-machine interfaces and other modules.
|
|
OTC welding robot program protection function settings
When important program requirements are protected from being modified, we can set the maintenance function, i.e., the file maintenance setting. In general, there are two types of file maintenance settings, simple selective maintenance and maintenance of passwords (ciphers) for requirement setting. Here's how to set it up:
...
|
|
An integral part of the drive system for industrial robots – OTC Odihi
1. Pneumatic drive system
The pneumatic drive system is generally composed of cylinders, valves, air tanks and air compressors (or directly supplied by the air pressure station). and so on, with compressed air to drive the execution of the organization to carry out the operation. Its advantages are convenient air source, agile action, simple structure, low cost, ...
|
|
Five types of arc welding sensors for OTC robots
The OTC arc welding robot has five optional special sensor accessories for arc welding, which are FD-WD, FD-AR, FD-QD, FD-QF, FD-QT. During this period, the introduction of each type of arc welding special sensor equipment is as follows:
1. ...
|
|
OTC welding robot origin reset
When the OTC robot is being used, the encoder battery low alarm cannot be recovered, and the encoder orientation information is lost, it is necessary to reset the operation:
52 encoder failure encoder battery charge lo ...
|
|
Graphic tutorial for the installation of OTC welding robot relay device plus I/O board
The installation method of the I/O board of the OTC welding robot relay device and the connection method of the general I/O wire are taken as an example of the OTCFD series robot. As we all know, the relay unit and the I/O board can be used together, and one control unit can connect more than two boards.
If you buy an OTC welding machine at the same time ...
|
|
Features of four-axis stamping robot manipulator - OTC Odihi
In China, under the background of deepening industrial transformation and upgrading, and weakening the profitability of the population, the scale of manipulator use is becoming more and more extensive, and industrial robots are rapidly entering the market with a high compound growth rate. The stamping manipulator can replace the body to complete the damage and repetitive monotonous work, and can also reduce the strength of human labor.
|
|
OTC Odichi welding machine to reduce spatter method
Splash issues
Because metal is thrown from the weld point to adjacent surfaces, spatter reduces power and adds expense to the installation line. After the welding is completed, the welder needs to sort out the weld, and the rest of the data is wasted.
Many welders think it's part of welding. Many people learn ...
|
|
Welding Robot - OTC Robot
The reason why welding robots can account for more than 40% of the total number of industrial robots is related to the special industry of welding. Welding, as an industrial "tailor", is a very important means of processing in industrial production.
|
|
Description of the common keys of the Odish robot teach pendant
1. The axis key for controlling the movement of the junction is mainly used to adjust the orientation and viewpoint of the robot and the welder. When the SW switch is pressed, the cooperative coordinates can be used to control the robot's orientation.
2. The coordinate switch button can be used in the axis ...
|
|
The OTC robot is printed with the word DAIHEN on it
With the acquisition of more and more users of OTC robots, the popularity is growing. At present, more and more factory users have begun to pay attention to OTC robot products, and everyone may have a simple or in-depth understanding of OTC robot products from the Internet or related exhibitions.
...
|
|
Contact
working hours
