Usefulness of annotations in the KUKA robot programming language

KUKA's KR 3 AGILUS conquers Brazil's Bionicook to serve snacks, drinks and desserts in the world's first fully active fast food vending machine. Industrial enterprises have long begun to adopt the ...

A robot can be equipped with a working space. The working space provides security for the equipment. There are two types of workspaces: 1. The working space is a forbidden area Only robots are allowed to operate outside of the workspace. ...

1. The reason for the overheating problem encountered in the maintenance of KUKA robot servo motor (1) The power supply voltage is too high; (2) The power supply voltage is too low, the motor is running with rated load, and the current is too hot for the winding; (3) When repairing and removing the winding, the thermal dismantling method is improperly selected, which burns the iron core; ...

The KUKA robot used in the integration of the KUKA device robot system is a robot that is specially planned for the device. Compared with general industrial robots, it has the characteristics of high precision, good flexibility, small working range, and can be used in conjunction with other systems. Now it is widely used in various ...

After each change to the motion command, the robot program must be tested at low speed (run method T1). Immediately starting a robot program at high speed can cause damage to the robot system and the entire equipment, as unpredictable movements may occur. If someone sits dangerously ...

Programmable software limit switches limit the axis size of all robots and positioning axes. The software limit switch is intended for use only as a machine guard and is set to prevent the manipulator/positioning device from traveling to the end baffle of the machine. Software limit switches have been put into operation in industrial robots.

For the KUKA robot itself, the main thing is the cleaning and inspection of the manipulator, the lubrication of the reducer, and the axle brake test of the manipulator. (1) The base and arm of the manipulator always need to be cleaned regularly, if the solvent is used, the use of strong solvents such as acetone should be prevented, and the use of ...

1. Maintain good parts Parts are an important part of CNC machine tool robots, the reason why the parts of CNC machine tool manipulators show severe wear and tear in the process of use, mainly because of the problems in people's devices, so that the orientation of parts is problematic.

KR CYBERTECH IS THE WORLD'S FIRST ROBOT BAR BAIER Engineering GmbH has developed the world's first fully automated bar with the help of a bar robot, which is in collaboration with the University of Aalen (Hochschule Aalen) and the beverage industry.

Industrial Robot Motion Programming: 1. Understand the industrial robot, the operating environment setting of the teach pendant, and the use of programmable buttons of the teach pendant; 2. Manually operate the robot, the robot I/O communication interface, standardize the I/O board and equipment; 3. Establishment and storage of program data, ...

1. Program control system: apply a certain rule of control to each degree of freedom, and the robot can complete the required space orbit. 2. Adaptive control system: when the external conditions change, in order to ensure the required quality or in order to improve the control with the accumulation of experience...

From the perspective of mechanical structure, industrial robots can be divided into single-axis robots, coordinate robots, horizontal multi-joint robots (SCARA), straight multi-joint robots and parallel robots (DELTA), etc., and the following five types are clarified in order. ...

1. In the main menu, select the > Measure > Thing > XYZ 4 points. 2. Give a number and a name for the thing to be measured. I admit it with a persistent key. 3. Use TCP to move to a reference point at will. Click Measure. Click Yes to reply to the security question ...

The boundary of robot operation is to move parts and things in space through a certain organization, and the needs naturally represent the position and posture of the parts, things, and the organization itself. In order to delimit and apply the mathematical quantities that represent potentials, it is necessary to delimit the coordinate system and give the rules of representation. ...

What does the indentation of the KUKA robot instruction line do? In order to illustrate the relationship between program modules, it is recommended to indent nested instruction columns in the program text and write instructions with the same nesting depth one line after another. The effect obtained is only reflected in the appearance, it only ...

The cost of the global robot is mainly composed of: about 35% of the reducer, about 20% of the servo machine, about 15% of the control system, and only about 15% of the mechanical processing of the robot body. The world's high-end robots are mainly controlled by a small number of international robot companies such as ABB, Fanuc and Kuka, and they ...

KUKA robot resolver-to-digital converters (RDCs) are used to collect motor orientation data. Up to 8 resolvers can be connected to the RDC. In addition, the temperature of the motor is measured and analyzed. EDS is used to store non-volatile data in RDC bins. ...

1. Enter the program in the form of the teach pendant T1, click on the lower left corner: Instruction - Logic, and you will see the commonly used logic instructions such as WAIT, WAITFOR, and OUT. 2. Select WAIT. The lower end of the interface *** presents the WAIT Time port sec .

KUKA launched the KR C5 micro IP54 anti-oil mist protective cover, which escorts the efficient work of the KR C5 micro control cabinet in harsh environments such as dust and oil mist, and uses a super heat dissipation system to cool the control cabinet in the protective cover. ...

1. Welding positioner. There are many specifications of welding positioners, and the common welding positioners are single-axis welding positioners. Two-axis welding positioner. Triaxial welding positioner, etc. It can be applied to different fields according to different models. The welding robot and the welding positioner move in harmony. Welding Robot ...