Autonex PSK series 2-segment display pressure sensor

A high-temperature pressure sensor is a sensor that converts pressure into an electrical signal output, which usually consists of two parts, namely a sensitive element and a conversion element. The sensitive element refers to the part of the sensor that can directly feel or respond to the measurement; The conversion element refers to the sensitive element in the sensor ...

First, the difference in working principle Photoelectric sensors are controlled by converting changes in light intensity into changes in electrical signals. The laser sensor first emits a laser pulse by aligning it with a laser emitting diode. After being reflected, the laser light is scattered in all directions. Partially scattered light returns to ...

1. Errors in improper introduction of devices In other words, the thermocouple should not be installed too close to the door and the heating place, and the penetration depth should be at least 8-10 times the diameter of the maintenance tube; Maintenance of thermocouples ...

The first is the offset error: since the high-frequency pressure sensor maintains a stable straight offset over the entire pressure range, the change in converter diffusion and laser adjustment correction will cause the offset error. The second is the sensitivity error: ...

1. Avoid strong light sources Photoelectric sensors can generally operate stably when the ambient illumination is high. However, avoid facing the optical axis of the sensor with strong light sources such as sunlight and incandescent lamps. When the angle of the optical axis of the sensor (light receiver) and the strong light source cannot be changed, the sensor can be surrounded by ...

Proximity switches are the most commonly used solution for touchless detection. The most commonly used proximity sensor is inductive, that is, through electromagnetic waves, to sense metal objects near the detection surface of the sensor; In practice, this is a very simple tool for the detection of metal objects from one to two inches.

1. The transmission interval of the digital load cell is long, the communication speed is fast, and the anti-cheating effect is remarkable; The output signal of the traditional analog load cell is small, generally millivolt level, and the signal is still lost due to the damage of the cable resistance during the transmission process, and it is also very simple to be affected by the surrounding environment.

Autonex cylindrical remote proximity switch PRD/PRDW series, the selection of self-developed special IC, with the highest international noise immunity level, high echo frequency, low leakage current and residual voltage, the detection interval is 1.5-2 times of the original product, close to the switch and the cable connection part of the selection of strong ...

Autonics continuously improves the product function and quality, so that the product is at the international first-class level. For more than 10 years, the market share of the products in Korea has been maintained. 1. Adopt self-developed special IC ...

The TR1D series has a high-speed sampling period of 50ms and a display accuracy of ±0.3% for more accurate temperature control. Simultaneous heating/cooling control is available to provide effective temperature control. With a width of only 22.5mm, the product minimizes the limitation of installation space and can be accessed with ...

In the rotary power system, the most frequently involved parameter: rotational torque, in order to detect the rotational torque, the traditional use of torsion angle phase difference sensors. The more mature detection method of torque testing is strain electrical testing skills. It has high precision, fast frequency response, good reliability, long life, etc.

At present, there are not many single ferrule terminal joints on the market, and most manufacturers are using double ferrule terminal joints, and the market price is about 9-18 yuan, and the price is different according to different types. Fittings, whether they are double ferrule end fittings or single ferrule end fittings, are all ...

1. Measure resistance (surface power-off) (1) First use a multimeter to measure the input and output resistance of the load cell, and then compare it with the clarification. If there is a big difference, it will be broken. First, use a multimeter to measure the input and output resistance of the load cell, and then carry out the ...

Depending on the resolution supported by the encoder, encoders can be divided into marker encoders, HD encoders, and Full HD encoders. The higher the frame rate, the clearer the video. 1. What does the resolution of the encoder mean? The resolution of the encoder refers to the encoder passing through a line or a dark line (also ...

Cover the safety light curtain with your hands and observe whether the indicator light conversion is normal. During the use of the punch photoelectric protection device, the orientation of the photoelectric protection device shall not be changed at will. In the protection zone, the light curtain should be blocked by hand, and the machine should be able to stop the operation immediately. ...

SET button, which can be used to set the sensitivity. The basic principle of the sensor is to sense the refractive index of different media through a fiber optic probe, so as to obtain a digital signal, display it on the screen, and send the switching value by comparing the magnitude of the displayed value and the set sensitivity value. Indicator light when the sensor ...

Digital fiber optic sensors convert measured objects into measurable optical signal sensors. The principle of operation is to send the incident beam of the light source to the modulator through the optical fiber, and interact with the internal and external measurement parameters of the modulator to form a dimmable signal. Digital fiber optic sensors use ...

The sensor is a kind of detection device, which can feel the measured information, and can transform the felt information into an electrical signal or other required form of information output according to certain rules, so as to meet the requirements of information transmission, processing, storage, display, recording and control. ...

Voltage sensor refers to a sensor that can sense the measured voltage and convert it into a usable output signal, in a variety of detection and control systems, it is often necessary to track and collect the communication DC voltage signal that changes at high speed, and do spectrum analysis on some more complex voltage waveforms. Voltage Sensors ...

1. If the electronic ruler is used for a long time, the seal is aging, there are many impurities, and the water mixture and oil will seriously affect the contact resistance of the brush, resulting in the continuous beating of the display. At this moment, it can be said that the electronic ruler of the linear displacement sensor is now damaged and needs to be replaced. ...