The sensor is a kind of detection device, which can feel the measured information, and can transform the felt information into an electrical signal or other required form of information output according to certain rules, so as to meet the requirements of information transmission, processing, storage, display, recording and control.
Do you know that sensors are used in our lives?
1. Use in environmental monitoring
With the attention and attention of human beings to environmental quality, based on the monitoring of the ecological environment in the sensor network environment, the environment can be given early warning, the comprehensive management of the environment can be accurately measured, and the effective development of environmental monitoring work can be ensured, so that the relevant departments can grasp the current status of the ecological environment and ecological quality.
For example, several sensors are used to monitor rainfall, river water level, soil moisture, air quality and other factors, and based on this, guess and analyze the climate environment and ecological environment of each region, so as to provide a basis for environmental management and protection, adopt countermeasures, improve ecological quality, protect the regional environment, and maintain ecological balance.
2. Use in industrial handling
In the field of industrial control, the use of sensors can be said to be very wide, such as product process control, car manufacturing, industrial machinery and automated production equipment, etc., the sensor can detect the operation status of the integrated equipment, displacement detection, step positioning detection, assembly line condition detection, equipment safety protection detection, temperature, humidity detection, gas and liquid flow detection, pressure, tension interval detection, etc., real-time supervision and control of various parameters in the production process, Keep the equipment working in normal condition or better, and make the product reach better quality.
The use of sensors in industry has improved operational power, improved production value, and improved engineering power.
3. Use in agriculture and animal husbandry
Agriculture is an important area for the use of sensors. The yield of crops is closely related to climatic conditions, and temperature, light, and moisture are all important factors affecting the growth of crops. With the continuous development of sensor technology, various climate sensors are used in agricultural production to monitor environmental temperature and humidity, light, soil and other factors, improve the defense ability of agricultural producers against climate disasters, reduce blind investment, and effectively improve agricultural production power.
The continuous development of smart feeding has also promoted the use of sensors in animal husbandry, because of the relatively closed nature of the breeding environment, harmful gases, temperature and humidity and other factors have a greater impact on the health of livestock. The sensor technology is used to realize real-time monitoring of the equipment, personnel and environment, animals and other information of the breeding place, and the data is displayed, stored and analyzed on the monitoring cloud platform through network transmission, so as to realize the comprehensive environmental monitoring of the breeding farm, comprehensively guide the production, operation and management of the breeding farm, assist the manager to straighten out the production process, ensure the safety of production, and produce stable meat products for consumers.
|
More on that
|
Precautions for the use of Autotonics safety light curtains
Cover the safety light curtain with your hands and observe whether the indicator light conversion is normal.
During the use of the punch photoelectric protection device, the orientation of the photoelectric protection device shall not be changed at will.
In the protection zone, the light curtain should be blocked by hand, and the machine should be able to stop the operation immediately.
...
|
|
Autonix proximity switch
Proximity switches are the most commonly used solution for touchless detection. The most commonly used proximity sensor is inductive, that is, through electromagnetic waves, to sense metal objects near the detection surface of the sensor; In practice, this is a very simple tool for the detection of metal objects from one to two inches.
|
|
Otonic photoswitch determination
1. Measurement of action interval; When the action piece approaches the sensing surface of the switch from the front, the interval between the action of the switch is the interval between the action of the switch, and the measured data should be within the parameters of the product.
2. The interval between exonerations ...
|
|
A type of non-contact liquid level sensor – Autonex
Capacitive level sensors, ultrasonic level sensors, and discrete photoelectric level sensors. The common development of these three non-touch level sensors is that they are not affected by the color, corrosiveness, pressure, density, etc. of liquids, because these sensor technologies cannot directly cause problems with liquids.
|
|
Range of sensor applications – Autonex
The sensor is a very widely used detection device, which is used in environmental monitoring, traffic management, medical health, agriculture and animal husbandry, fire safety, manufacturing, aerospace, electronic products, and other fields. It can feel the information being measured, and can press the felt information ...
|
|
Classification and working principle of proximity switches – Autonex
According to the different operating principles, it can be divided into inductive type, capacitive type, photoelectric type and magnetic inductance type. According to the type of circuit current, it can be divided into AC type and DC type. The inductive head of an inductive proximity switch is an inductive coil with a ferrite core, which can only detect metal bodies. Raise...
|
|
Characteristic parameters of the BJ series of Autonex photoelectric sensors
Through-beam type
BJ15M-TDT-(C)-(P) / BJ10M-TDT-(C)-(P) / BJ7M-TDT-(P)
Polarized specular reflective type
BJ3M-PDT-(C)-(P)
...
|
|
Gas Sensor Failure Analysis – Ottonix
A gas sensor is a converter that converts the volume fraction of a gas into an electrical signal. We will inevitably encounter some problems when using gas sensors, and we have analyzed them as follows:
1. How long does it take for the gas sensor to be used and then calibrated again: the initial calibration ...
|
|
The difference between switching power supply and module power supply – Autonix
The two are not universal
Module power supplies are power supplies that can be mounted directly on a printed circuit board, and feature applications for application-specific integrated circuits (ASICs), digital signal processors (DSPs), microprocessors, memories, field-programmable gate arrays (FPGAs), and other digital or analog applications.
|
|
How to use the Autonex digital fiber optic sensor
Digital fiber optic sensors convert measured objects into measurable optical signal sensors. The principle of operation is to send the incident beam of the light source to the modulator through the optical fiber, and interact with the internal and external measurement parameters of the modulator to form a dimmable signal. Digital fiber optic sensors use ...
|
|
TZ4ST-24R Autonox Thermostat Advantages:
Dual PID auto-adjustment function
There are high-speed response modes and slow reaction modes in the PID function.
When you want to reach the desired value quickly, use the high-speed mode (PIDF mode)
When you want to minimize overshoot, use slow mode (PIDS mode)
...
|
|
Precautions when using Autonex safety light curtains
Cover the safety light curtain with your hands and observe whether the indicator light conversion is normal.
During the use of the punch photoelectric protection device, the orientation of the photoelectric protection device shall not be changed at will.
In the protection zone, block the light curtain by hand, ...
|
|
How to determine if the sensor is damaged - Autonix
1. Measure resistance (surface power-off)
(1) First use a multimeter to measure the input and output resistance of the load cell, and then compare it with the clarification. If there is a big difference, it will be broken. First, use a multimeter to measure the input and output resistance of the load cell, and then carry out the ...
|
|
Sensor fault judgment and solution - Autonics
1. Air flow meter problem
Problem characteristics: The vehicle is shaking at idle, high fuel consumption, weak at high speed, and black smoke from the exhaust pipe.
View and dissect: through the fault diagnostic instrument detection, the engine air flow meter data block is seriously exceeded, the cause of the air flow meter damage, ...
|
|
Pressure sensor influencing measurement results factor – Ottonix
Pressure is an important parameter in pneumatic, fluid or other measurements, so pressure sensors have been widely used in various experimental measurements, product testing, and automatic control systems, and the stability of the product is a major consideration when purchasing pressure sensors.
...
|
|
Advantages and disadvantages of Ortonix products in the market
First, the standard scale of the busway Ottonix products in the shopping mall:
1. The products produced are all accessories products commonly used in industry, and they are widely applicable.
2. The product quality is stable, the production and the inspection are regular. Compared with domestic products, the stability of the product function ...
|
|
There are several measurements related to the Autonicus photoelectric switch
1. Measurement of action interval; When the action piece approaches the sensing surface of the switch from the front, the interval between the action of the switch is the interval between the action of the switch, and the measured data should be within the parameters of the product.
2. The Liberator ...
|
|
Autonex BD series laser displacement sensors
BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, bending, and flatness of the target object by detecting the displacement.
Regardless of the color or material, the sensor provides accurate and reliable measurement results. Sensor head and amplifier unit ...
|
|
Installation steps for dynamic torque transducers – Autonex
Dynamic torque transducers can be used in the manufacture of viscometers, electric (pneumatic, hydraulic) torque wrenches, which have the advantages of high precision, fast frequency response, good reliability and long life.
Installation process:
1. According to the connection form of the shaft and the length of the dynamic torque sensor, determine the original ...
|
|
Autonics BH series photoelectric sensors
The BH series photoelectric sensors can be used with M18 fixing nuts and fixing nuts for frontal equipment, or with M3 bolts and nuts for peripheral equipment. Sensitive equipment options promise easy application in a variety of industrial environments. The sensor can be equipped with a simple wire to generate individual or simultaneous N...
|
|
Contact
working hours
