How to use the universal proximity switch safely – Autonex

Pressure is an important parameter in pneumatic, fluid or other measurements, so pressure sensors have been widely used in various experimental measurements, product testing, and automatic control systems, and the stability of the product is a major consideration when purchasing pressure sensors. ...

Capacitive level sensors, ultrasonic level sensors, and discrete photoelectric level sensors. The common development of these three non-touch liquid level sensors is that they are not affected by the color, corrosiveness, pressure, density, etc. of the liquid, because these sensor skills cannot directly lead to the development of liquid ...

The TR1D series has a high-speed sampling period of 50ms and a display accuracy of ±0.3%, which can complete more accurate temperature control. Heating/cooling can be operated together to provide useful temperature control. With a width of only 22.5mm, the product minimizes the limitation of installation space and can be passed through ...

On November 4, 2014, Ortonicus attended the 2014 Industrial Automation Exhibition held at the Shanghai New International Expo Center. With the theme of "high-end, intelligent and green", this exhibition has a total of CNC machine tools and metalworking exhibition, industrial automation exhibition, industrial robot exhibition, new energy and electric ...

1. Measurement of action distance; When the action piece is close to the sensing surface close to the switch from the front, the distance close to the switch action is the action distance close to the switch, and the measured data should be within the parameters of the product. 2. Release distance ...

Ultrasonic flow sensor is a new type of general-purpose time-difference multi-function ultrasonic sensor suitable for industrial environments, mainly using low-voltage multi-pulse balanced emission acceptance technology, which can be mainly applied to measure the flow of most clean and uniform liquids without large concentrations of suspended particles or gases.

The two are not universal Module power supplies are power supplies that can be mounted directly on a printed circuit board, and feature applications for application-specific integrated circuits (ASICs), digital signal processors (DSPs), microprocessors, memories, field-programmable gate arrays (FPGAs), and other digital or analog applications.

The Ottonix sensor BWC series has selected a 3-point light cross-network detection method to reduce the detection blind spot to the maximum limit, realize the world's leading detection characteristics, and effectively prevent problems that may be caused by direct sunlight, etc., and the detection is more stable. Up to 100 international cutting-edge ...

1. The transmission interval of the digital load cell is long, the communication speed is fast, and the anti-cheating effect is remarkable; The output signal of the traditional analog load cell is small, generally millivolt level, and the signal is still lost due to the damage of the cable resistance during the transmission process, and it is also very simple to be affected by the surrounding environment.

The pressure sensor in the servo press is built-in, which can ensure that the force on the spindle is not affected by the radial separation force, avoid part of the load in the installation, do not directly connect the workpiece, and is not easy to damage. High-speed rings of ...

Proximity switch, also known as non-contact travel switch, in addition to being able to complete stroke control and limit protection, is still a non-contact detection device, used to detect the size of parts and speed measurement, etc., and can also be used for the active connection of frequency conversion counters, frequency conversion pulse generators, liquid level control and processing programs.

sensitivity Concept: It refers to the ratio of the change of output △y to the change of input △x in the case of steady-state operation of the sensor, that is, the ratio of the dimension of output and input. Sensor sensitivity is the slope of the output-input characteristic curve. If the output and input of the sensor ...

When measuring the strain of an element, the strain gauge can be directly glued to the component, but if you want to measure the force, pressure, acceleration and other signals, these physical quantities must first be converted into strain, and then measured with a strain gage, and the conversion process is more than when measuring directly. The first step in completing this transformation process ...

Modular power supplies are power supplies that can be mounted directly on a printed circuit board and feature power supply to application-specific integrated circuits (ASICs), digital signal processors (DSPs), microprocessors, memory, field-programmable gate arrays (FPGAs), and other digital or analog loads. One...

Cover the safety light curtain with your hands and observe whether the indicator light conversion is normal. During the use of the punch photoelectric protection device, the orientation of the photoelectric protection device shall not be changed at will. In the protection zone, block the light curtain by hand, ...

In the field of industrial automation, machines need sensors to provide the necessary information to perform the relevant operations correctly. Robots are now using a number of sensors to improve their adaptability. For example, there are many cobots that integrate torque sensors and cameras to ensure that they are equipped with torque sensors and cameras during operation.

The temperature controller is an electrical switchgear that controls the temperature of an air-conditioned room. The temperature scale in the air-conditioned room controlled by the temperature controller is generally 18°C--28°C. The temperature controller commonly used in window air conditioners uses the principle of pressure effect to promote the opening and closing of contacts. Its structure consists of bellows ...

A gas sensor is a converter that converts the volume fraction of a gas into an electrical signal. We will inevitably encounter some problems when using gas sensors, and we have analyzed them as follows: 1. How long does it take for the gas sensor to be used and then calibrated again: the initial calibration ...

Autonex has recently launched a new shading action form to add a space for users to choose. The BTF series of ultra-thin photoelectric sensors has a new dark ON form to increase the user's selection space. The selection of self-developed special IC, 3.7mm ultra-thin planning, suitable for small space ...

Digital fiber optic sensors convert measured objects into measurable optical signal sensors. The principle of operation is to send the incident beam of the light source to the modulator through the optical fiber, and interact with the internal and external measurement parameters of the modulator to form a dimmable signal. Digital fiber optic sensors use ...