1. Do not hit with metal objects. Usually the HMI will be covered with a layer of glass to protect the screen and make it easy to touch. However, the glass is fragile, do not hit the screen with metal objects during use, it is easy to cause the glass to be scratched or broken. 2. Avoid squeezing the screen with heavy objects. Around HMI ...

One. The touch screen is not allowed Fault phenomenon: A surface acoustic wave touch screen, touching the part of the monitor screen with your finger can not complete the corresponding operation normally. Fault analysis and processing This phenomenon may be the reflection of the sound wave touch screen around the screen after a period of use.

1. Do not hit with metal objects. Usually the HMI will be covered with a layer of glass to protect the screen and make it easy to touch. However, the glass is fragile, do not hit the screen with metal objects during use, it is easy to cause the glass to be scratched or broken. 2. Avoid squeezing the screen with heavy objects. Around HMI ...

Since infrared touch technology is the trend of contacting products in the future, when will infrared technology become mainstream? At present, the touch screen technology widely used in the market is mainly resistive technology touch screen, capacitive technology touch screen, and infrared technology touch screen. If the use of resistors becomes longer, it will ...

First of all, there is touch technology, which is very important. At present, there are three commonly used types of touch technology for touch screens, which are resistive touch screens, capacitive touch screens, and infrared touch screens. Capacitance and resistance can not be made of large size, infrared touch screen can be made of small size, can also be made of large ...

In order to improve the anti-interference ability of the PLC system, we should start from the design. In the anti-interference design of specific projects, products with strong anti-interference ability can be selected to improve the anti-interference of equipment and systems by suppressing interference sources, cutting off or attenuating the transmission path of electromagnetic interference, and using software means.

1. TPC1262HI common fault phenomenon of Kunlun Tongtai touch screen (1) Black screen, blurred screen, white screen (2) Caused by the aging of the LCD screen, the high voltage is low, and the lamp is aging (3) The LCD screen has no display, and the brightness is not clear (4) LCD screen display vertical bar, display horizontal bar ...

61. 200PLC: What is the reason for the communication status jump (1) Whether the communication delay setting is too short, and set the appropriate delay time; (2) Whether there is interference on site, shielded wire and grounding can be used; (3) Refer to PLC "SMW22", see PLC running program ...

56. Does TPC support OPC communication? No, the network version supports OPC communication. 57. 200PLCLC communication wiring with TPC7062K (1) The 7 positive and 8 negative of the TPC RS485 interface is connected with the positive and 8 negative of the PLC serial port 3, and the wiring diagram is as follows: TPC PLC 58. 200 ...

The difference between infrared touch screen and capacitive touch screen is that the infrared touch screen has grooves and is afraid of strong light. This machine is thick and heavy, but it is cheap. The capacitive screen all-in-one machine is more beautiful, lighter and thinner, it is pure flat and easy to implement. 1. Infrared touch screen all-in-one machine Infrared technology ...

47. There are very few drivers in Device Manager (1) Whether to select "All Driver Installation" when configuring the software installation, if not, you need to reinstall the driver; (2) If you don't find a supported driver in the device window of the configuration software, check whether the device supports the standard ...

The most far-reaching technological change in touchscreen performance is the shift from resistive to capacitive touchscreen technology. According to iSuppli, a market research agency, nearly 25% of touchscreen mobile phones will be transferred from resistive to capacitive touchscreens by 2011. Capacitive touch screen technology brings ...

1. If you are using a capacitive touch screen, then it is recommended that you first install the driver required for the capacitive touch screen correctly according to the requirements of the manual when you use it for the first time, and then click "Start"/"Program"/"Microtouch Touc" on the screen with your fingers.

Kunlun Tongtai touch screen arrives in large quantities, can be easily matched with Siemens PLC, details can be consulted There is a stock model TPC1061TI TPC1071GI TPC1561HII TPC1570GI TPC7062TI TPC7072GI ...

44. Clear the configuration engineering password flow (1) Record customer information: including the name of the unit, the name of the customer, the contact number, ask the customer for the configuration project and require the customer to provide the certificate with the official seal and the purchase channel; Attestation File Format: Our company is XXX, ...

How to choose the touch screen model in the Kunlun Tongtai software, this is selected according to the model of the touch screen. Before you can choose a model, you need to determine what type of touchscreen you use on your device. Different models of touch screens, some with high configuration, some with low configuration, but the configuration is ...

41. How to implement pop-up sub-windows This is achieved using the OpenSubWnd() function, which is described in the MCGS help document. 42. After power failure, save it as the initial value of the next boot Use it in the script of the exit strategy! SaveSingleDataInit() and ! FlushDat ...

The operating environment of Kunlun Tongtai TPC project was actively restarted If the CPU usage reaches 99% during project operation, the operating environment will be automatically exited and then started from the beginning. The reasons for high CPU usage may be: too many bitmaps, loops, etc.

96. How to check the status of the PC connection to the TPC network? Connect the PC to TPC with a network swap cable, click "Start-Run" on the PC, enter CMD enter in the run bar, and then enter the ping IP address in the DOS interface.

Classification of capacitive touch screens Capacitive touch screens are divided into two categories, one is surface capacitive touch screen, and the other is projected capacitive touch screen, and projected capacitive can also be subdivided into self-capacitive and mutual capacitive. Among them, the surface capacitive and projected self-capacitive touch screen can only achieve ...

The McgsPro architecture is divided into three parts: configuration environment, simulated operation environment, and operation environment. The configuration environment and the simulated operating environment are equivalent to a complete set of tools and software, which can be run on a PC. Users can ...