Autonex 3-point light cross-mesh photoelectric sensor

1. Selection of reliability The potential of a sensor to persist in its properties over a period of time is called reliability. In addition to its own structure, the key factor affecting the long-term reliability of the controller is the use of harsh environments. Harsh environments symmetrical heavy-duty sensors may lead to ...

1. Measurement of action interval; When the action piece approaches the sensing surface of the switch from the front, the interval between the action of the switch is the interval between the action of the switch, and the measured data should be within the parameters of the product. 2. The interval between exonerations ...

1. Observe whether the outside of the load cell is deformed or cracked. If there is any damage, please contact the manufacturer immediately. 2. Find the connection end of the sensor in the weighing controller, and measure the connection circuit of the sensor. The general excitation voltage (between EXC+ and EXC-) is 5-10V, and the output ...

Key 1: Whether the speed of the motor is normal, whether there is speed jitter and stalled rotation (you can check it with a tachometer). The key is whether the anchor bolts of the motor are loose, whether the root is defective, and whether there are debris around. The key is three, whether the housing and coupling of the motor are defective, ...

Autonex has recently launched a new shading action form to add a space for users to choose. The BTF series of ultra-thin photoelectric sensors has a new dark ON form to increase the user's selection space. The selection of self-developed special IC, 3.7mm ultra-thin planning, suitable for small space ...

1. Check the standard of the equipment hole: Assuming that the standard of the equipment hole is not suitable, some of the threads of the sensor will be slightly worn during the equipment process. This not only affects the sealing performance of the equipment, but also makes the pressure sensor inadequate, and may even cause safety hazards. ...

1. Plug in the force sensor you want to calibrate, such as a force sensor with a range of 50kg, and select a force sensor channel on the left; 2. Enter the range of the sensor in the "range" input box, such as "50" kg; 3. Enter the zero value force of the sensor in the "zero value" input box, generally enter ...

1. Measurement of action interval; When the action piece approaches the sensing surface of the switch from the front, the interval between the action of the switch is the interval between the action of the switch, and the measured data should be within the parameters of the product. 2. The Liberator ...

Capacitive level sensors, ultrasonic level sensors, and discrete photoelectric level sensors. The common development of these three non-touch liquid level sensors is that they are not affected by the color, corrosiveness, pressure, density, etc. of the liquid, because these sensor skills cannot directly lead to the development of liquid ...

1. Shielding technology The use of metal materials to make a container, the circuit that needs to be maintained is wrapped in it, which can effectively avoid the disturbance of electric or magnetic fields, and this method is called shielding. Shielding can be divided into electrostatic shielding, electromagnetic shielding and low-frequency magnetic shielding. 2. Electrostatic shielding ...

BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, twist and flatness of the target object by detecting the displacement. Regardless of the color or data of the policy, the sensor can provide accurate and stable measurement results. Sensor head and amplifier unit ...

Performance indicators of load cell: 1. Dynamic characteristics, 2. Linearity, 3. Hysteresis characteristicsDynamic characteristics refer to the output characteristics of the sensor when the input changes. In practice, the dynamic characteristics of a sensor are generally used to indicate how well it responds to certain specification input signals. This is because the sensing ...

The PSK1 series is a two-stage display pressure sensor that displays the current value (PV) and the set value (SV) together. It not only shows the setting status, but also provides a power-saving form and a fine-tuning function to improve the user's convenience. PSK1 Key Features: Additional pressure scale (composite pressure ...

In the rotary power system, the most frequently involved parameter: rotational torque, in order to detect the rotational torque, the traditional use of torsion angle phase difference sensors. The more mature detection method of torque testing is strain electrical testing skills. It has high precision, fast frequency response, good reliability, long life, etc.

1. Avoid strong light sources Photoelectric sensors can generally operate stably when the ambient illumination is high. However, avoid facing the optical axis of the sensor with strong light sources such as sunlight and incandescent lamps. When the angle of the optical axis of the sensor (light receiver) and the strong light source cannot be changed, the sensor can be surrounded by ...

Modular power supplies are power supplies that can be mounted directly on a printed circuit board and feature power supply to application-specific integrated circuits (ASICs), digital signal processors (DSPs), microprocessors, memory, field-programmable gate arrays (FPGAs), and other digital or analog loads. One...

The BH series photoelectric sensors can be used with M18 fixing nuts and fixing nuts for frontal equipment, or with M3 bolts and nuts for peripheral equipment. Sensitive equipment options promise easy application in a variety of industrial environments. The sensor can be equipped with a simple wire to generate individual or simultaneous N...

Cover the safety light curtain with your hands and observe whether the indicator light conversion is normal. During the use of the punch photoelectric protection device, the orientation of the photoelectric protection device shall not be changed at will. In the protection zone, the light curtain should be blocked by hand, and the machine should be able to stop the operation immediately. ...

1. Characteristics 1. It can not only measure the constant motion torque, but also measure the rotational rotational distance; 2. It can measure both non-static torque and static torque; 3. High precision and good reliability; Strong anti-interference ability; 4. Light weight, very light, all kinds of ...

Infrared sensors include an optical system, a detection element, and a conversion circuit. Optical systems can be divided into two categories: transmissive and reflective according to different structures. According to the working principle, the detection element can be divided into thermal detection element and photoelectric detection element. The most widely used thermistors are thermistors. Thermistor...