The 2021 China International Medical Equipment Fair will be held from May 13 to 16 at the National Convention and Exhibition Center in Shanghai.
Estun Medical will exhibit the unilateral and bilateral versions of the Burt Upper Limb Rehabilitation Training System, which is more suitable for the full-cycle rehabilitation training program of the rehabilitation population, and also includes the Burt Upper Limb Rehabilitation Training System for children.
Burt (upper limb rehabilitation training system) originated from the Guinness World Records listed in the WAM manipulator, born in Boston, by the robotics company Barrett Technology LLC and well-known rehabilitation medical institutions RIC, Spaulding Rehabilitation Hospital cooperation, has obtained the United States FDA, the national class II medical device registration certificate, and listed in the Chinese and American markets.
1. Indications for neurological diseases: stroke, traumatic brain injury, cerebral palsy, spinal cord injury, brachial plexus injury, Parkinson's disease, multiple sclerosis, motor neuron disease, amyotrophic lateral sclerosis, central spinal cord injury syndrome, peripheral nerve injury, myasthenia gravis orthopedic diseases: osteoarthritis, joint replacement surgery, shoulder periarthritis surgical diseases: burn surgery
2. Performance characteristicsBurt is an upper limb rehabilitation robot with end drive and support three-dimensional space movement. It has a real-time adjustable weight loss support function, which is suitable for patients with upper limb muscle strength level 0-5. It has a variety of sports training modes such as passive, active and passive combination, limited axis/in-plane movement, etc. It has a wide range of assessment items such as range of motion, muscle strength, and participation.
3. Application of scientific research institutes: Combination of medicine and engineering, interdisdisciplinary, Estun Medical has been committed to the productization of better technology in university laboratories and better rehabilitation treatment for patients. In the laboratories of major universities and research institutes across the country, Burt robots help patients recover from severe to moderate and mild through somatosensory teaching technology, brain motor imagination trigger training, adaptive gravity compensation technology, and simulated real-world group resistance.
In 1996, Mudie et al. proposed bilateral isokinematic training (BIT), which is a form of bilateral upper limb movement. Bilateral training is a movement pattern in which both limbs perform the same movement in time and space, either independently or together.
For hemiplegic patients, it is very difficult for the affected side to complete a simple coordinated action, but the movement between the two limbs is more obvious than that of normal people. The coordination of the body is the coordination of the neuromuscular system, which is organized according to the activity mode of a certain operation.
1. Features of Burt Double-sided Sports Mode:
Joint reactions
Bilateral functional task training
Two-sided robot-assisted training
Bilateral rhythm cue training
Coordination training
1. Indications: children with movement disorders such as cerebral palsy, traumatic brain injury, spinal cord injury, peripheral nerve injury, poliomyelitis (polio).
2. Main features: humanized design, convenient and fast operation. It provides a variety of training modes and has an evaluation function. It includes training scenarios such as task-oriented, homework, cognition, and ADL. Record training data, generate training reports, and feedback training results.
3. Treatment effect: improve joint mobility and alleviate joint contractures. Exercise the muscle strength of the upper limbs, eliminate muscle tension and relieve muscle spasms. Establish normal movement patterns and nerve conduction pathways. Stimulates nervous system reconstruction, improves upper limb motor control, and promotes nerve pathway recovery.
|
More on that
|
Estun Servo Motor - AC Servo Motor Vibration Fault Analysis
Mechanical
1. Bearing
The bearing clearance on the lead screw housing is too large after wear, or the bearing roller elements and cages are severely worn due to the lack of grease in the bearing, resulting in excessive loads. After bearing wear, the clearance is too large, which will cause the coaxiality error between the center of the motor rotor and the center of the lead screw.
|
|
Estun servo motor - how to select servo motor (1-5)
1. How to choose the servo motor and stepper motor correctly?
Mainly depends on the specific application, simply put, it is necessary to determine: the nature of the load (such as horizontal or vertical load, etc.), torque, inertia, speed, accuracy, acceleration and deceleration and other requirements, upper control requirements (such as port interface and ...
|
|
Estun servo motor - six common faults and solutions for servo motors
1. The motor temperature is too high or the smoke is faulty
Cause:
1. Excessive load
2. Two-phase operation
3. Air duct obstruction
4. The ambient temperature increases
5. Stator windings are short-circuited between phases or turns
6. Stator winding grounding
7. The power supply voltage is too high ...
|
|
Estun servo – the difference between servo motor and stepper motor
First, the control accuracy is different
The step angle of the two-phase hybrid stepper motor is generally 3.6 ° and 1.8 °, and the step angle of the five-phase hybrid stepper motor is generally 0.72 ° and 0.36 °. There are also some high-performance stepper motors with smaller step angles. Such as Sitong company produced a kind of wire for slow wire ...
|
|
Estun servo – the difference between servo motor and ordinary motor
There are many types of motors, and the ordinary motor we commonly use is the induction motor, although it and the servo motor are both motors, there are certain differences:
1. The speed of ordinary motors is too fast, the torque is too small, and because there is no feedback from itself, it is usually impossible to achieve accurate control.
|
|
Estun servo motor - the starting of the DC motor
(1) Check the circuit condition (including the connection of power supply, controller, wiring and measuring instrument, etc.), check whether the spring of the starter is flexible and whether the contact is good.
(2) When the constant voltage power supply is supplied, it needs to be started with a starter. Closed power switch, under motor load, ...
|
|
The reason why the Estun welding robot teach pendant cannot enter the management interface
Fault 1: Contact deviation
Phenomenon 1: The direction of the finger does not coincide with the mouse arrow.
Reason 1: After the driver is installed in the teach pendant, there is no vertical contact with the bullseye when correcting the bearing.
Treatment 1: Correct the orientation from the beginning.
...
|
|
The Estun robot does not turn on the power after turning on the main switch of the control cabinet
1. Check whether the power supply line of the electric control cabinet is connected correctly;
2. Detect whether the external power supply voltage meets the requirements: three-phase AC380V power supply robot models: power supply robot models: ER4-1450, ER6-1600, ER10-1600, ER16-1600, ER20-1780, ER20/10-2000, ...
|
|
Full analysis of Estun server alarm code
Estun Server Alarm A.01 Parameter Broken
Estun server alarm A.02 A/D is damaged
Estun Server Alarm A.03 Overspeeding
Estun server alarm A.04 Overload
Estun Server Alarm A.05 Position Deviation Counter Overflow
Ace...
|
|
Estun servo motor - the difference between servo motor and control motor and how to choose a motor
What are the main differences between the two?
1. The way of control is different
Stepper motor: The rotation angle is controlled by controlling the number of pulses, and one pulse corresponds to a step angle.
Servo motor: The angle of rotation is controlled by controlling the length of the pulse time.
2. Work ...
|
|
What are the welding methods of Estun welding robots?
1. Applicable welding methods and cutting methods:
Generally, arc welding robots are only suitable for MIG/MAG welding, and there is no interference of high-frequency arc striking on the control and drive system of the robot. Whether it can be used for tungsten argon arc welding depends on whether the robot has a special anti-interference method.
|
|
The system control instructions of the Estun robot are described in detail
CALIB Command: This instruction calibrates joint position sensors.
STATUS command: Used to display the status of the user's program.
FREE command: This command displays the unused storage capacity.
ENABL command: used to turn the system hardware on and off.
ZERO Directive: This directive ...
|
|
Estun servo motor - classification and introduction of common servo control systems
The servo control system is an operating system that can automatically control the mechanical movement of the test device according to the predetermined requirements. There are many classification methods for servo systems, and there are three common classification methods:
1. Classification according to the characteristics of the controlled parameters.
2. According to the type of drive element ...
|
|
The reason for the servo drive alarm A04 and its handling method
Alarm code A04 refers to:
Alarm mechanism: The overload rate of the drive accumulates to a certain threshold and triggers an alarm.
Causes:
1. Servo motor brake control circuit problem;
2. Robot power cable problem;
3. The drive parameter setting is wrong;
...
|
|
Estun servo motor - maintenance and maintenance of DC motor
Special attention should be paid to the following matters when the motor is regularly inspected during use:
1. The area around the motor should be kept dry, and no other objects should be placed inside and outside it
The cleaning of the motor shall not be less than once a month, and the dust inside shall be blown off with compressed air during cleaning.
|
|
Eston servo features
Features of Estun servo.
High overload capacity.
The capacity of the industrial-grade intelligent power module IPM selected by the EDB/EDC servo drive is larger than that of similar servo products that are usually calibrated with the same power, and has the characteristics of strong overload capacity, strong anti-load disturbance ability, and large starting torque.
|
|
Estun Robotics – What is the difference between robot lubricant and grease?
1. Lubricating oil is used in various types of machinery, the role is to reduce friction, so as to protect the liquid lubricant of machinery and processed parts, mainly playing the role of lubrication, cooling, rust prevention, cleaning, sealing and buffering.
2. Grease is a relatively viscous grease-like semi-solid. It is used in mechanical ...
|
|
Estun servo motor - daily inspection and maintenance of three-phase asynchronous motor
The daily inspection is mainly to monitor the start-up and operation of the motor, find abnormal phenomena in time, and prevent accidents. Generally, it is carried out by looking, hearing, touching, smelling, asking and monitoring the ammeter and voltmeter.
(1) Observe whether the motor has abnormal noise and vibration. Especially...
|
|
Estun released new products and joined hands with TRIO, MA.i, and CLOOS to participate in the expo
On September 15, 2020, the grand opening of the China Industry Expo, Estun Automation joined hands with TRIO, CLOOS, M.A.i to focus on complete solutions for industrial automation, industrial robots, and intelligent manufacturing.
|
|
Estun Robotics – Battery Replacement Steps for Industrial Robots
The position data of each axis of the industrial robot is stored through a backup battery, which should be replaced regularly (one and a half years). In addition, if the backup battery shows a voltage drop alarm, the battery should also be replaced in time.
1. Replace the controller motherboard battery
Program and system variables are stored in the main ...
|
|
Contact
working hours
