Load cell quality selection – Autonex

Dynamic torque transducers can be used in the manufacture of viscometers, electric (pneumatic, hydraulic) torque wrenches, which have the advantages of high precision, fast frequency response, good reliability and long life. Installation process: 1. According to the connection form of the shaft and the length of the dynamic torque sensor, determine the original ...

1. Capacitive Capacitive pressure sensors are usually cleaned by a large number of OEM professional applications, testing the capacitance change between two surfaces, so that these sensors can sense the extreme pressure and vacuum level. In our typical sensor setup, the compact outer gram contains two metal exteriors, ...

When choosing a pressure sensor, we should consider his inductive accuracy, and what are the aspects that affect the accuracy of the pressure sensor? In fact, there are many factors that form sensor errors, and let's pay attention to four unavoidable errors, which are the initial errors of the sensor. ...

Capacitive level sensors, ultrasonic level sensors, and discrete photoelectric level sensors. The common development of these three non-touch level sensors is that they are not affected by the color, corrosiveness, pressure, density, etc. of liquids, because these sensor technologies cannot directly cause problems with liquids.

1) The detected object should not touch the proximity switch, so as not to damage the proximity switch due to friction and bumping; 2) Pull the lead wire of the switch by hand will damage the switch close, and it is best to fix the lead wire with a line card at 10 cm away from the switch when the device is installed.

1. Avoid strong light sources Photoelectric sensors can generally operate stably when the ambient illumination is high. However, avoid facing the optical axis of the sensor with strong light sources such as sunlight and incandescent lamps. When the angle of the optical axis of the sensor (light receiver) and the strong light source cannot be changed, the sensor can be surrounded by ...

Sensors are the most fundamental and commonly used components in automation systems. Autonex offers a wide range of sensors including proximity switches, photoelectric sensors, fiber optic sensors, and pressure sensors, which are committed to maximizing the user's work efficiency. ​ ...

Digital fiber optic sensors convert measured objects into measurable optical signal sensors. Its working principle is to send the incident beam of the light source to the modulator through the optical fiber, and interact with the internal and external measurement parameters of the modulator to form a dimmable signal. Digital Fiber Optic Sensors ...

sensitivity Concept: It refers to the ratio of the change of output △y to the change of input △x in the case of steady-state operation of the sensor, that is, the ratio of the dimension of output and input. Sensor sensitivity is the slope of the output-input characteristic curve. If the output and input of the sensor ...

The Ottonix sensor BWC series has selected a 3-point light cross-network detection method to reduce the detection blind spot to the maximum limit, realize the world's leading detection characteristics, and effectively prevent problems that may be caused by direct sunlight, etc., and the detection is more stable. Up to 100 international cutting-edge ...

1. Shielding technology The use of metal materials to make a container, the circuit that needs to be maintained is wrapped in it, which can effectively avoid the disturbance of electric or magnetic fields, and this method is called shielding. Shielding can be divided into electrostatic shielding, electromagnetic shielding and low-frequency magnetic shielding. 2. Electrostatic shielding ...

In the field of industrial automation, machines need sensors to provide the necessary information to perform the relevant operations correctly. Robots are now using a number of sensors to improve their adaptability. For example, there are many cobots that integrate torque sensors and cameras to ensure that they are equipped with torque sensors and cameras during operation.

The load cell can be wired in two different ways with input and output: One is the four-wire connection method The load cell of the four-wire connection method has no special requirements for the secondary instrument panel, and it is very fast to use, but when the cable is long, it is very easy to be affected by the working temperature.

A high-temperature pressure sensor is a sensor that converts pressure into an electrical signal output, which usually consists of two parts, namely a sensitive element and a conversion element. The sensitive element refers to the part of the sensor that can directly feel or respond to the measurement; The conversion element refers to the sensitive element in the sensor ...

Pressure is an important parameter in pneumatic, fluid or other measurements, so pressure sensors have been widely used in various experimental measurements, product testing, and automatic control systems, and the stability of the product is a major consideration when purchasing pressure sensors. ...

Infrared sensors include an optical system, a detection element, and a conversion circuit. Optical systems can be divided into two categories: transmissive and reflective according to different structures. According to the working principle, the detection element can be divided into thermal detection element and photoelectric detection element. The most widely used thermistors are thermistors. Thermistor...

Proximity switches Proximity switches are a reliable and proven solution for the detection of correct and wrong contacts. Photoelectric sensors Photoelectric sensors use a pair of luminaires and receivers to detect distances and detect the presence of objects. ...

1. Selection of reliability The potential of a sensor to persist in its properties over a period of time is called reliability. In addition to its own structure, the key factor affecting the long-term reliability of the controller is the use of harsh environments. Harsh environments symmetrical heavy-duty sensors may lead to ...

Ultrasonic flow sensor is a new type of general-purpose time-difference multi-function ultrasonic sensor suitable for industrial environments, mainly using low-voltage multi-pulse balanced emission acceptance technology, which can be mainly applied to measure the flow of most clean and uniform liquids without large concentrations of suspended particles or gases.

According to the different operating principles, it can be divided into inductive type, capacitive type, photoelectric type and magnetic inductance type. According to the type of circuit current, it can be divided into AC type and DC type. The inductive head of an inductive proximity switch is an inductive coil with a ferrite core, which can only detect metal bodies. Raise...