A kind of pressure reducing valve in instrumentation refers to a device used to control the pressure value. Pressure reducing valve is usually used in the category related to water, because from the perspective of the transmission medium, the transmission medium of the equipment is mainly water, but we all know that water will move, that is to say, water may be lost in use, for this pressure reducing valve also has a very important function is that the water-saving function is outstanding, together with the ability to improve the operation of the water supply system, optimize it, from the application of the equipment, can be used in mines, or buildings, especially and high-rise buildings, Our daily water is provided through the city water supply pipe, and this equipment also has an important application in some areas of the water supply pipe.
When consumers buy pressure reducing valves, they need to choose products according to their needs. Generally, pressure reducing valves are used in different categories, and the varieties and types selected are also different. From the perspective of structure, this kind of equipment can be divided into bellows pressure reducing valve, membrane pressure reducing valve, piston pressure reducing valve, etc., different types of different functions also determine the different scale of its application. However, when selecting the equipment, no matter which one is used, there are options and specifications.
First of all, it depends on whether the equipment is abnormal at the time of selection, such as jamming, for the non-standard pressure reduction equipment, even if the value of the outlet pressure is adjusted in the scale of the tension spring pressure level, it will also show abnormal vibration, or as mentioned above, it will show the phenomenon of jamming. The problem of pressure reducing equipment, especially the pressure reducing equipment specially for water medium, is that the problem is water leakage, that is, the sealing of the equipment is not good, but it does not mean that any pressure reducing equipment must not leak at all, and the sealing of pressure reducing equipment generally has two raw materials, one is soft seal, and the other is metal seal. Regarding the metal sealed equipment, the medium can be lost within the specified time, but the scale of the loss is also a quantitative rule, generally not more than 0.5% of the large flow, otherwise it is regarded as a problem with the equipment, but the requirements for soft sealing are very strict, and it is completely not allowed to be lost. From the point of view of the large pressure of the equipment, the pressure behind the valve and the pressure before the valve of the regular equipment are different, and the pressure after the valve will be relatively small, about 0.5 times.
The selection requirements of general pressure reducing equipment are about the same, and different pressure reducing equipment is selected for different application environments. For example, the bellows type decompression equipment mentioned above, its applicable medium is generally not fluid, but steam, and the pressure and caliber are constrained, the bellows type decompression equipment is to act on the low-pressure small-diameter medium to play a good role, or the piston type decompression equipment can also play an outstanding role.
Pressure reducing valve is widely used in production, the medium used is water and steam, but also other liquids, in the selection of pressure reducing equipment, as long as you understand its characteristics, understand what the working environment is suitable for better choice, together with some common sense to ensure the selection of high-quality products.
|
More on that
|
Schneider turbine flowmeter selection considerations
1. According to the requirements of measurement intention:
It is required to select the unit with instantaneous flow rate or cumulative flow rate (cumulative flow), the unit of flow display, measurement accuracy, repeatability, linearity, flow scale and scale, measurement temperature, pressure loss, temperature and pressure compensation, output signal characteristics and echoes.
|
|
Inverter control motor speed method - Schneider
1. Why can the rotation speed of the motor be changed freely?
Motor rotation speed unit: r/min number of rotations per minute, can also be expressed as rpm.
Example: 2-pole motor 50Hz 3000 [r/min]
4-pole motor 50Hz 1500 [r/min]
Conclusion:...
|
|
Schneider frame circuit breaker MT circuit breaker does not close the brake problem
Schneider structural circuit breaker is not stored (check the power supply of the energy storage motor, if it is normal, check whether it can be manually stored for energy)
MX shunt coil live (disconnect MX coil power)
The MN coil is not charged or faulty (a voltage higher than 0.85Un is applied to the MN)
The circuit breaker is latched in ...
|
|
The type of signal output from the Schneider sensor
The type of sensor output signal
Sensors are commonly used detection devices that convert perceived information into electrical signal outputs, and are used in a variety of applications. What can be divided into the output signal mode of the sensor ...
|
|
Analysis of the causes of Schneider touch screen touch deviation
(1) Fault--: Contact error
Phenomenon 1: The direction of the finger does not coincide with the mouse arrow.
Reason 1: After installing the driver, there is no vertical contact with the bullseye center when correcting the bearing. Solution 1: Re-align the bearing.
Phenomenon 2: Some districts ...
|
|
The reason for the frequent tripping of Schneider leakage switches
1. Defective device
The lead wire of each pile head is not firmly connected and loosened for a long time, which will cause the pile to heat and oxidize, burn out the outer insulation of the wire, and announce sparks and burnt smell, forming undervoltage of the line, and the air switch action.
2. The leakage switch does not match the load
The actual electricity load of the home is large ...
|
|
The difference between Schneider PLC and Siemens PLC
There are three main differences, namely: different applications, different products, and different characteristics.
1. The application situation is different: the programmable manipulator produced by Siemens in Germany is also widely used in China.
|
|
Design and calculation method of inverter braking resistance - Schneider
1. The number of braking resistor boxes is roughly calculated as: motor power (KW)/11.2 (take the upper limit of the integer).
2. The selection of the power of the braking unit is generally (1-2) times the power of the inverter;
3. The function of braking resistor ...
|
|
Inverter power settings, waveform test issues
1. After the inverter is repaired, the power number demand is corrected, don't forget
Generally, an inverter corresponds to a power number (also known as the number of horsepower), for example, a 75 kilowatt inverter is set under heavy load, and 100 kilowatts is set under light load. In this way, the customer will not use it to present ...
|
|
Schneider inverter ATV32 book type performance and advantages
Schneider ATV32 book inverter has built-in programmable controller function, flexible and intelligent; Integrated safety functions, 30% cost savings compared with external security modules; First-class Schneider patented synchronous motor open-loop control technology; Book-type design, support side-by-side installation, space-saving; Many...
|
|
Features of Schneider's different PLC series
Schneider PLC series mainly includes:
Schneider NEZA PLC (Schneider TSX08 series);
Schneider Quantum PLC (Schneider 140 series);
Schneider Micro PLC (Schneider TSX37 series);
Schneider Premium PLC (Schneider TSX...
|
|
A brief description of the working principle of Schneider power soft starter
Schneider ATS48 soft starter is composed of three opposite parallel thyristors, which are connected in series between the three-phase power supply and the motor, by changing the trigger angle of the thyristor gate pulse, the conduction angle of the thyristor gradually increases from zero, according to the pre-set soft starter parameter curve, the motor output torque ...
|
|
Inverter terminal block classification - Schneider
Inverter terminal blocks belong to a kind of connector, the variety is divided into single hole, double hole, socket, hook, etc., from the data point, copper silver plating, copper galvanized, copper, aluminum, iron, etc. Their effect is mainly to transmit electrical signals or conductive use, in the project, it is the station front engineering for the station after the project reserved for the connection ...
|
|
The meaning of the inching of Schneider inverter
The inch movement in Schneider inverter means that the control signal can drive the motor intermittently according to the certain rules, and the motor acts in strict accordance with the dynamic and stop instructions of the control signal, and the motor does not roll by inertia during the shutdown. It's like moving an inch and then stopping.
The full name of Schneider inverter is "...
|
|
Schneider miniature circuit breaker problem analysis and answer
Fault 1: The shell of Schneider MCB product is yellowed or burned.
Reason 1: It is very likely that the magnetic coil inside the circuit breaker is burned out because of harmonics or high-frequency signals.
Method 1: * The good thing is that the filtering can be satisfied with the use of 50Hz/60Hz power frequency.
...
|
|
Schneider thermal relay selection method
1. In principle, the ampere-second characteristics of the Schneider thermal relay should be as close as possible to or even coincide with the overload characteristics of the motor, or under the overload characteristics of the motor, and at the same time, the Schneider thermal relay should not be affected (not acting) at the moment of short-term overload and start of the motor.
...
|
|
The inverter controls the direction of the motor – Schneider
If the direction of rotation at this moment is opposite to the steering required by the equipment, please put F0-13=1 or after power-off (note that the main capacitor charge discharge of the inverter is over), the UVW output line of the inverter ...
|
|
Pay attention to the problem of false load connection method in inverter debugging - Schneider
There are many novices who are not familiar with the fake load when repairing the inverter, and the repair of the inverter saves many of their modules with the false load, because the novice repairer generally does not know how to do this, and now the light is on to make it clear that the module is going to be broken. A false load is a resistor with a few hundred ohms ( ...
|
|
Schneider inverter maintenance power settings, waveform test problems
1. After the inverter is repaired, the power number needs to be modified, don't forget it
Generally, an inverter corresponds to a power number (also known as the number of horsepower), for example, a 75 kilowatt inverter is set under heavy load, and 100 kilowatts is set under light load. In this way, the customer will not use it to present ...
|
|
Schneider launches the new ComPacT NSX molded case circuit breaker
From August 23 to 25, 2021, the 2021 China World Intelligent Industry Expo (hereinafter referred to as the Smart Expo) was held in Chongqing World Expo Center. Mitsubishi Electric (China) ...
|
|
Contact
working hours
