(1) FILM - that is, the film used for touch, the base material is PET. When touched, the ITO of the upper and lower layers is brought into contact by deforming the film, resulting in different "resistance values" in the X and Y axes (similar to the principle of moving rheostats). Depending on the requirements of use, the table of FILM ...

1. Novelty of operation The capacitive touch screen supports multi-touch, making operation more intuitive and fun. 2. It is not easy to be touched by mistake Because the capacitive touch screen needs to sense the current of the human body, as long as the human body can operate it, there will be no ...

1. High stability, not affected by time and environmental changes 2. Strong adaptability, not subject to current, voltage and static interference, suitable for some harsh environmental conditions (explosion-proof, dust-proof) 3. High light transmittance, no intermediate medium, up to 100% 4. Screen and ...

1. The infrared touch screen does not need touch pressure, it can be operated freely even if you wear gloves, and anything can be touched. 2. Compared with the display equipped with capacitive and resistive touch screen, the picture saturation is richer and the contrast ratio is better, which improves the user's visual comfort. ...

1. Do not hit with metal objects. Usually the HMI will be covered with a layer of glass to protect the screen and make it easy to touch. However, the glass is fragile, do not hit the screen with metal objects during use, it is easy to cause the glass to be scratched or broken. 2. Avoid squeezing the screen with heavy objects. Around HMI ...

Question 1, How to solve the problem of double click is not sensitive? Open the infrared touch screen to adjust the sensitivity of the program and reduce the sensitivity. Question 2, Is there any drift phenomenon in the infrared screen? The structure of the infrared touch screen is generated by infrared rays, so usually the sleeves and so on touch the infrared screen ...

When the touch function of the touch screen fails, first try to enter offline mode to verify whether the touch screen backlight is burned out. If the cause of the fault is verified to be a burned-out backlight, then we can follow the steps below to temporarily restore the touch function of the touchscreen (take the Proface GP series touchscreen as an example below).

1. The film surface of the industrial touch screen is the touch surface, that is, the front of the product; The glass side is non-touch, i.e. the back of the product. 2. The industrial touch screen part is a glass product, and the corners of the glass are sharp, please wear gloves and finger sleeves when assembling. 3. The industrial touch screen part is fragile glass ...

The industrial touch screen is a resistive screen, which is better than the capacitive screen anti-interference, but generally if there is no response, most of the touch glass on the outside (generally called the touch board) is broken, and it is good to replace it directly, of course, the following problems are not excluded: 1. The touch screen and PLC are generally used together, and the ...

Method 1: Reconfigure capacitive screen parameters through the configuration file The configuration parameters of the capacitive touch screen are saved in the serial port screen, and the sensitivity of the capacitive touch screen can be configured by writing new parameters. For customers who need to add a panel to a capacitive touch screen, panel samples and structures can be ...

The five-wire resistive touch screen and the four-wire resistive touch screen both adopt the principle of analog resistance, and their conventional fault characteristics are exactly the same as those of the four-wire resistor. If you are using a five-wire resistive touch screen, when there is an installation and maintenance problem, please determine and solve the problem in the following order. ...

Touch screen mobile phone capacitive touch screen and resistive touch screen are mainly different in touch sensitivity, accuracy, cost, multi-touch feasibility, damage resistance, cleaning, and sunlight visual effect. Touch sensitivity, 1. Resistive touch screen: pressure is needed to make all layers of the screen ...

1. The touch screen controls the inverter through PLC 1. At present, the general control inverter needs to use PLC to communicate with the inverter, read the information of the inverter, and then the touch screen communicates with the PLC to complete the control of the inverter to start and stop, and monitor the operation of the inverter.

With the promotion of Industry 4.0, human-machine interfaces are commonly found in various types of smart applications. Increasingly complex human-machine applications, from data collection and analysis to system monitoring, often require a large number of logical operations to be realized, which is time-consuming and difficult to maintain. 　　Wei Lun Tong ...

1. TK series (simple and practical, widely used) 1、TK8071iP 7" TFT display 800*480 dots, brightness 350, contrast ratio 500:1, 16M color, 128MB memory, DC10.5——28VDC power supply, four-wire resistive type, overall dimensions 200.4*146.5*34m...

18. Macro calculation: The values to be calculated are read, and then the data is calculated and written to LW0. 19. According to the different selections of the project menu, two different direct windows will pop up with one button: Macro commands are triggered by a button to read the ...

1. Why can't the screen display Chinese normally, but the display is garbled? Answer: This situation is generally caused by not choosing the correct Chinese font, just choose a Chinese font, the specific operation steps are as follows: 1) In EasyBuilder soft...

1. Set through the system parameter settings: menu bar [Common] - [System Parameters] - [General Attributes] - [Screen Saver Settings] If the screen saver time is set to 25 minutes (equal to 25 written in LW9081), the screensaver window is 80, from the time the program is downloaded to the HMI is turned on, 25 ...

1. Observational method As the name suggests, it is to use the eyes to visually check whether the components are burned, damaged, deformed, discolored, cracked, and whether the CRT filament is lit after the current is turned on.

1. Background color: Right-click on the blank space of the window, select Properties, Pop-up Settings, and select a color in the background; Hatch: In the background, tick the fill, select the pattern color and pattern. 2. Picture/Background Image: Select Picture Element ...

The cMT X series models are recognized and trusted by users for their excellent functions and stable performance. Therefore, after the launch of the standard and advanced cMT X series models, Weiluntong Technology has launched the cost-effective cMT X basic human-machine interface: 　　It can meet the needs of only a single network port and traditional ...