KUKA robot external axis motor marshalling steps

KUKA robotic resolver-to-digital converters (RDCs) are used to collect motor orientation data. Eight resolvers can be connected on the RDC. In addition, the temperature of the motor is measured and analyzed. EDS is used to store non-volatile data in an RDC bin. ...

A lightweight cobot is an industrial robot with a flat, small touchscreen user interface that allows the user to control the robotic arm by instructing the movements on the screen. Perhaps, by holding the robotic arm easily, the desired path of movement is displayed. The interface fits most industrial sensors and ...

1. Hot-swap button for the cable of the robot teach pendant (after pressing this button, the control cabinet can unplug the teach pendant without shutting down). 2. Connect the manager key switch; Switch the mode of movement, T1: manual low speed (as long as the manual mobile robot is capable in this form, * high speed 250mm/s), T2: manual ...

The teaching pendant, also known as the teaching programmer or teaching box, is a hand-held device for manual operation, program writing, parameter equipment and monitoring of the robot; It is the core component of the robot control system, and is a device used to register and store mechanical movement or processing memory.

For the KUKA robot itself, the main thing is the cleaning and inspection of the manipulator, the lubrication of the reducer, and the axle brake test of the manipulator. (1) The base and arm of the manipulator always need to be cleaned regularly, if the solvent is used, the use of strong solvents such as acetone should be prevented, and the use of ...

1. Understand the ontological structure of the robot The KUKA robot used in the workshop is composed of 6 axes, each axis is driven by 1 servo motor, and each axis of the robot is operated independently to control the servo motor to rotate forward and backward after powering on, and the single-axis operation is carried out in T1 mode. Second, choose the shaft to sit ...

KUKA Industrial Robot System Introduction, KUKA Robot Co., Ltd. was founded in 1898 in Augsburg, Bavaria, Germany, and is one of the world's leading industrial robot manufacturers. KUKA Robotics has more than 20 subsidiaries around the world, most of which are sales and service centers, ...

(1) Provide voltage and have the function of power distribution (2) The decombiner (SIL2) technology is used to collect the orientation information of the eight motors for orientation feedback (3) Obtain the real-time temperature of the motor (PTC) （4） ...

1. It is necessary to keep the robot control system closed and adopt protective measures to prevent accidental restarts. 2. Disconnect the power cord. 3. Everything is protected under the premise of security, and this article is not responsible for any problems with the presentation. ...

Why does the robot flutter when it is running? Please do the following: 1. Is it that the load data you entered is incorrect? If the load data is too high or too low, and the difference between the load and the practice load is too large, it will cause flutter! 2、 ...

KUKA palletizing robots are widely used to move goods to or from pallets (unloading palletizing) and to lift, palletize, pack, transport, sort and mark. This process is not only closely related to the wooden furniture industry, the food logistics sector, but also ...

The efficient and flexible production of a wide range of batches is seen as a challenge for future production. Overcoming this challenge requires the perfect coordination between man and machine. In today's modern factories, there are already a lot of automation ...

1. In the main menu, select the > Measure > Thing > XYZ 4 points. 2. Give a number and a name for the thing to be measured. I admit it with a persistent key. 3. Use TCP to move to a reference point at will. Click Measure. Click Yes to reply to the security question ...

First, a single robot stamping and unloading: the robot will transfer the plate data from the palletizing table to the positioning table, and then transfer it to the stamping die for stamping after positioning, and after the stamping is completed, the data will be brought into the palletizing table through the robot, and the single pressure robot will be automatically loaded and unloaded. Second, robot stamping ...

1. Install the Load data determination load test software, change the teach pendant language to English, and only recognize English, German and Japanese during the load test, not Chinese. 2. Place the robot in the right direction ...

One. Outline: With win10 system, after installing WoV4.0.X or WoV5.0.x, WoV will stop working when the bus configuration is turned over: When I was ready to connect to the bus online, I found that there was no network card adapter to choose from: And there is an error message in the information window: ...

After the KUKA robot is turned on, the teach pendant displays KSS15101 fault code, which means that the five safety nodes of the safety device from 0 to 4 channels are wrong, and the robot cannot be put into normal operation. First of all, the KUKA robot is repaired ...

Abort the robot: Cut off the signal $drivers_Off, this abort is to break the robot servo. Continue to start the robot after abort: Repeat the previous article "KUKA Robot External Active Start Equipment Method 1" process 4 and 5 to start the robot. ...

KUKA Robotics only promises to use industrial robots in accordance with regulations and in a safety-conscious manner when the machine is equipped with perfect skills. Improper use can result in injury and property damage. Not all types of bots have this option. Letters about specific types of bots ...

When there is a problem with the gear reducer, we should check it in time to deal with the fault, as long as we have a certain understanding of the problems that may occur in the gear reducer. Today's China Transmission Network Xiaobian mainly introduces how to deal with the noise of gear reducer. ...