KUKA Robot General Safety Measures

The cost of the global robot is mainly composed of: about 35% of the reducer, about 20% of the servo machine, about 15% of the control system, and only about 15% of the mechanical processing of the robot body. The world's high-end robots are mainly controlled by a small number of international robot companies such as ABB, Fanuc and Kuka, and they ...

In a sense, the wire and cable production profession is a profession of data finishing and assembly. - The amount of data used is huge, and the data cost in cable products accounts for 80-90% of the total production cost; Second, there are many types and varieties of materials used, and the functional requirements are particularly high.

Once the phenomenon of the robot servo motor drive burning MOS tube is started, the external stable wire of the drive will be burned, and the equipment cannot be operated. When the repairer checked, he found that a power tube had been damaged, but because there was no material, he couldn't figure out the effect of the tube.

The reducer is an independent component composed of gear transmission, worm transmission and gear-worm transmission closed in a rigid shell, and is often used as a deceleration transmission device between the prime mover and the working machine. It plays the role of matching speed and transmitting torque between the prime mover and the working machine or actuator ...

With the deepening of Industry 4.0, the demand for automation and intelligence in the internal logistics link of the manufacturing industry is becoming increasingly prominent. That's where the KUKA KMP 600-S diffDrive mobile robot comes in. This new mobile robot companion ...

When a backup is required: 1. System failure; 2. Hardware collapse. Significance of backup: 1. Save the procedures made at that time; 2. The user can prevent misoperation and deletion of the program; 3. Let the system work from scratch to prevent secondary commissioning or equipment. ...

First, electrical connection Second, the initial power-on Third, security configuration Fourth, the robot zero point correction Fifth, I/O configuration seline; "> It is necessary to fix the robot before it can be powered on to operate the robot ...

Before the KUKA robot is put into operation for the first time, it is necessary to carry out a review to ensure that the equipment and equipment are in perfect condition, functional, safe and faulty. It is necessary to comply with the labor protection regulations of the country and region of the location, and it is also necessary to test all safety electrical ...

1. KUKA robot adopts all-aluminum structure with high strength, so the load is large, and the load can reach 1000kg. 2. KUKA six axes have completed the rapid electric ...

The KUKA robot power module KPS600/25-ESC error code and content includes: ERROR 52 The temperature in the boudoir is too high ERROR 79 COMMUNICATION FAILURE BETWEEN THE EEPROM ON THE CONTROL UNIT ERROR 65 ...

The main technical parameters of the robot are freedom, resolution, working space, working speed, working load, etc. The comfort of the robot refers to the number of independent motion parameters required to determine the orientation and posture of the robot's hand in space. The degree of freedom of the robot is generally equal to ...

Sparse coding can be very useful in this regard. This is an unsupervised machine learning algorithm that is implemented by creating a "sparse dictionary" to represent newly acquired data. The primary robot passes through a spectral chart (from ...

1. Optical imaging module. The module can be divided into two parts: lighting system planning and lens optical system planning. Lighting planning is to study the optical characteristics, distance, object size, scenery characteristics, etc. of the measured object, and reasonably plan the intensity, color, and ...

If the initial adjustment is lost (e.g. after a motor replacement or a bump), the initial adjustment is reverted. Since the learned error persists after the adjustment is lost, the KUKA robot calculates the initial adjustment. Before checking an axis, it is necessary to complete the ...

Industrial robots are widely used in industrial production, car production, electrical appliances, food, etc., can replace repetitive machine operations, and are a kind of machine that relies on its own power and control to achieve various functions. It can withstand human command, and it can also operate according to pre-programmed procedures. ...

In human-robot collaboration (HRC), humans and KUKA robots work directly together without a safety fence. This opens up a huge potential. But HRC is not always equal to HRC. There are four possible scenarios for how humans and KUKA robots can work together effectively.

The vision system of mobile robot refers to the vision system of mobile robot, including two parts: obtaining pictures through sensors and processing pictures through computer processors. According to the number and characteristics of vision sensors, the mainstream mobile robot vision system includes monocular vision, binocular vision, etc.

From the perspective of customers in the domestic market, due to the high sensitivity and low cost of collaborative robots, small and medium-sized enterprises are the main force in the use of collaborative robots. In addition, from a practical point of view, China's aging trend is becoming more and more significant, and the cost of domestic labor continues to rise. The manufacturing industry seeks to find more ...

The linear motion of an industrial robot refers to the linear motion of the tool TCP mounted on the flange of the sixth axis of the robot in space. The coordinate linear motion should specify the coordinate system, tool coordinates, and workpiece coordinates. Coordinate systems include earth coordinates, datum coordinates, tool coordinates, and workpiece coordinates. Specified ...