Pierre magnetic switch – the function of the disconnector

1. The overload capacity of the transistor is less than the overload capacity of the relay In general, in the case of a large inrush current (e.g., bulbs, inductive loads, etc.), the transistor overload capability is smaller, and more derating is required. 2. Under the condition of rated operation, the relay has the number of actions ...

1. The relationship between the specifications of the relay and the installation location For different star/triangle control positions, the specifications of the selected thermal relays are also different. As shown in Figure 1, the current setting value of the selected thermal relay is equal to the rated current value of the protected motor. In Fig. 2, the selected thermal relay ...

First, the contact is loose and cracks The contact is the electrical touch part of the relay to complete the switching load, and the contact of some products is riveted and pressed, and its primary disadvantage is that the contact is loose, the contact cracking or the scale azimuth error is too large. This will affect the touch reliability of the relay. ...

With the increasing functional requirements of industrial production, the continuous optimization of process levels and the escalation of the complexity of production conditions, systems that effectively record and manage relevant data are particularly important for machine safety, especially for production safety. PITreader Authorization ...

At the SIAF Guangzhou Automation Exhibition, which opened on March 10th, Pilz once again brought new automation solutions to visitors under the concept of "WeAutomate Safely". The exhibition ...

1. When the emergency stop is lifted, the machine cannot be suddenly restarted 2. In case of failure of the machine safety circuit, the power supply of the machine can be stopped 3. When the safety circuit fails, the machine can no longer be started Confirm safe input such as safety switches, light curtains, etc.

　　1. The same module can be triggered by high or low level through different wiring, and the trigger current is not less than 1mA, and the output capacity of the IO port of some 51 single-chip microcomputers is weak, and the circuit of pulling up or increasing the driving capacity is required (the default is low level triggering); 2. Advantages of low-level drive, ...

Franz Haas, the founder of the Bühler Group, invented the first wafer machine as early as the end of the 40s of the 20th century. Today, its subsidiaries are spread all over the world. In the wafer area of the consumer food division in Leobendorf, 700 employees are engaged in development, design and production, as well as sales, service, maintenance ...

In terms of functionality and cost-effectiveness, it is more suitable for customer needs of small and medium-sized security applications. "Similarities and differences" between PNOZ m B0 and PNOZ m B0.1 Similar to PNOZ m B0, the base module body of PNOZ m B0.1 offers 20 safe digital inputs that can be freely combined.

The fundamental characteristics of safety relays: Feature 1, can be used in some automatic control occasions: safety relay - a kind of equipment that can control safety, this equipment is very easy to use in the automatic control field. Generally, there are emergency stops or safety doors, as well as safety gratings and other input devices.

Safety relays from PNOZ – a classic In 1987, Pilz was a milestone in the development of the world's first emergency stop safety relay to protect people and machines. PNOZ has also become synonymous with safety relays and is used by customers all over the world. The full range ...

The fastener itself needs to be reliable and stable enough. It can be removed with specialized tools, such as hexagon screws, star screws, etc. Phillips/slotted screws are not recommended, as in some cases these screws can be easily punched with nails or carry-on equipment.

Pilz's new PNOZmulti2 base module, PNOZ m C0, is sure to be the next big thing...... The reason is simple, it has a compact design, a beautiful price, and the functionality is not "ambiguous" at all, after all, it belongs to the PNOZmulti family. 　　The basic module of PNOZ m C0 ...

Automated Guided Vehicle, abbreviated as AGV, also commonly known as AGV trolley, refers to a transport vehicle equipped with electromagnetic or optical automatic navigation devices, which can drive along the specified navigation path, and has safety protection and various transfer functions. Due to its flexibility, the degree of intelligence ...

1. Check the alarm cause of the relay, if there is a fault, reset the relay urgently, and replace the relay in time. 2. Check whether there is a protection alarm in the control system, if there is a protection alarm, the cause of the alarm will be eliminated, and the protection alarm system will be reset according to the corresponding steps. ...

The two-handed button is a commonly used safety start device, which is commonly used in punches, presses, cutting machines and other equipment; The purpose is to force the operator to leave the danger zone with his hands when driving the machine, so as not to come into contact with dangerous moving parts and cause safety accidents. 　　The "standard" of two-handed control says ...

The "Safety Standardization" theme exhibition organized by the China Machinery Industry Safety and Health Association and the National Machinery Safety Standardization Technical Committee was unveiled at the China Yiwu International Commodities (Standards) Expo held from November 24 to 27, 2022. Automation specialist Pilz was invited to participate in the exhibition to demonstrate ...

1) The installation of the switch panel should be after the installation of the lamp, and the switch must be connected in series on the live line; Application of sealed or protected sockets in wet locations; The allowable deviation of the verticality of the panel is not more than 1mm; The gap between the panels installed in rows should not be greater than 1mm. 2) Where the socket must be facing the switch panel ...

On March 1, 2023, the National Printing Machinery Standardization Annual Conference and the First National Coating Machine Standardization Annual Conference were held in Yiwu, Zhejiang. The meeting was guided by the Standardization Administration of the People's Republic of China, the China Machinery Industry Federation, and the Yiwu Municipal People's Government.

Allianz Industries 4.0 awarded Pilz the title of "Top 100 Industry 4.0 in Baden-Württemberg". Allianz Industry 4.0 is a network initiated and funded by the Baden-Württemberg Ministry of Economic Affairs. Every year, Allianz provides support for those who have the ability to work...