The "Safety Standardization" theme exhibition organized by the China Machinery Industry Safety and Health Association and the National Machinery Safety Standardization Technical Committee was unveiled at the China Yiwu International Commodities (Standards) Expo held from November 24 to 27, 2022. Automation specialist Pilz was invited to participate in the exhibition and presented products such as safety relays, control systems, safety sensors and more.
The "Safety Standardization" theme exhibition promotes machinery safety standards, technologies and methods, and promotes the concept of "great safety". Machinery safety standards are the most effective means to improve product safety, reduce safety costs, and ensure user safety, which provides a safety guarantee for the high-quality development of China's equipment manufacturing industry.
The exhibition area of the "Safety Standardization" theme exhibition area is 276m2, including three parts: safety standard interpretation area, safety solution exhibition area and safety product exhibition area. Through the organic combination of safety standards and safety products, the theme exhibition closely follows the national policy and explores new ways for the implementation and application of standards.
The safety product exhibition area is jointly planned by the Safety Protection Equipment Branch and the Ascending Safety Equipment Branch of the China Machinery Industry Safety and Health Association, and invites 10 key enterprises engaged in safety product research and development, safety risk assessment and active participation in the development of national standards for machinery safety for many years, including Pilz, to participate in the exhibition. The main exhibits include safety fences, safety light curtains, safety relays, personal protective equipment and climbing safety ladders, etc., which meet the relevant national standards and international standards of the application of safety products to improve the safety level of enterprises play a significant role.
The innovative exhibition of the "Safety Standardization" theme exhibition has achieved a new breakthrough in standardization work, blazed a new path for safety standardization work under the new situation, provided valuable experience for the full implementation and implementation of the "14th Five-Year Plan for Promoting the Construction of National Standard System for Promoting High-quality Development", and set up a banner of innovative standardization work, which is worth learning from and promoting.
Always committed to safe automation
As a safety ambassador from Germany, Pilz aims to protect people, machinery and the environment. Since entering the Chinese market in 2002, Pilz has always been committed to the promotion of machinery safety concepts and the introduction of advanced Germany technology into China, and has devoted itself to the standardization of machinery safety in China. In 2004, Pilz joined the National Technical Committee for Machinery Safety Standardization (SAC/TC 208), actively participated in the formulation and revision of machinery safety standards, involving hundreds of relevant standards, deeply participated in the construction of machinery safety industry-university-research demonstration base, and joined hands with Nanjing University of Science and Technology to create the first mechanical safety laboratory in China, continued to promote the publicity and implementation of standards, and took the lead in holding or participating in thousands of various standard publicity and implementation meetings/exchange meetings, which played an increasingly important role in China's machinery safety standardization.
At the "Safety Standardization" exhibition, Pilz presented safety products such as safety relays PNOZ, small controllers PNOZmulti 2 and safety door switches, presenting complete safety automation solutions.
About the Association
Founded in March 1989, China Machinery Industry Safety and Health Association is a national, industrial and non-profit social organization voluntarily formed for enterprises and institutions in the machinery manufacturing industry and related safety technology and occupational health workers.
China Machinery Industry Safety and Health Association is the review unit of "Safety Production Standardization First-level Enterprise" in the machinery industry, and is entrusted by the Ministry of Emergency Management to carry out relevant review work.
Li Qin, president of China Machinery Industry Safety and Health Association, is also the chairman of the National Machinery Safety Standardization Technical Committee, and the association and the Standardization Committee jointly carry out safety standardization related work.
|
More on that
|
Peel magnetic relay - the application and current situation analysis of solid state relays
Applications for Solid State Relays
(1) The recommended value of the foreign SSR trigger signal (i.e., the current through the light-emitting tube) is 10mA DC, and the recommended value of the domestic SSR trigger signal is 12-25mA DC.
(2) Multiple SSRs can use the same trigger signal, which is common in the control of three-phase AC loads.
|
|
Pierz supports ACMI S.p.A.'s packaging process
ACMI S.p.A. is an Italy company specializing in high-tech bottling and packaging lines. Based in Fornovo Taro, in the province of Parma, Italy, the company initially produced palletizers and depalletizers for the food and beverage industry, and later specialized in all packaging processes.
For...
|
|
Pierz: The safety protection of the press can be so neat!
1. Presses = inflexible?
In the past, presses were often labelled as "sluggish", "inflexible" and "high-risk". With the development of technology, safety solutions for presses are emerging one after another, and the safety of presses is greatly improved. In the event that security is ensured...
|
|
Pilz: Designing safe railway sites
From hardware components to complete safety concepts: Pilz has extended its industrial expertise from the field of machinery safety and health and safety regulations to railway sites. With many years of knowledge and experience, Pilz has demonstrated the same competence in the railway industry as it does in an industrial environment.
Skin...
|
|
Peel magnetic relay - the wiring method of PLC and relay
1. Y0 is connected to one end of the coil A1 of KA1;
2. The other end of KA1, A2, is connected to 24V;
3. Y1 is connected to A1 at one end of the coil of KA2;
4. The other end of KA2 A2 is connected to 24V;
5. COM terminated to 24V.
...
|
|
Pierre Servo Amplifier - Introduction to the parameters of the servo amplifier
Positional proportional gain
1. Set the proportional gain of the position ring adjuster;
2. The larger the setting value, the higher the gain, the greater the stiffness, and the smaller the position lag under the same frequency command pulse. However, too large a value may cause oscillation or overshoot;
3. Parameter value ...
|
|
Maintenance method of Germany PILZ Peel magnetic relay
Maintenance method:
1. When selecting the solid-state relay used in the printed circuit board with small current specifications, because the lead terminal is made of high thermal conductivity material, the soldering should be carried out under the condition that the temperature is less than 250 °C and the time is less than 10S.
|
|
Pilz - Presentation of the features of the safety relay PNOZ s60
In addition to the usual emergency stop monitoring, safety gate monitoring, light barrier monitoring and two-hand button monitoring, the safety relays of the PNOZsigma family are also functional, as well as safe speed monitoring, safe braking and braking monitoring. Voltage monitoring safety relays are also one of its features.
PNO ...
|
|
Peel magnetic relay - how to adjust the voltage of high and low voltage relays?
1. Determine the voltage range that needs to be regulated: First of all, you must clarify the voltage range you need to regulate, as well as the specifications of the high and low voltage relays and the voltage range that can be adjusted. If there is no clear scope and specifications, you can check the relevant manuals of high and low voltage relays or consult the equipment manufacturer.
|
|
The Pilz Safety PC PSS 4000 system provides customers with a better service
When building a safety system, it is particularly important to arrange the components of the safety system reasonably, which determines whether the reliability of the entire system can be guaranteed. Nowadays, with the gradual popularization of safety concepts, people's requirements for safety automation are getting higher and higher, and the scenarios of safety PLC applications are also increasing.
...
|
|
Peel magnetic relay - fault judgment and treatment method of safety relay
1. Determine whether the safety relay itself is faulty:
1. Separate from the three circuits of short-circuit S10/S12, S11/S12, S21/S22.
2. Turn on the 24V power supply (A1 is positive, A2 is negative), and the Power light should be on at this moment;
3. Reset the S33/S34 terminals, and the K1 and K2 lamps ...
|
|
Introduction and benefits of Pilmagnetic security locks
The use of safety locks If there are hazards in the equipment, such as moving levers, rotating mechanisms or even robots, in order to avoid damage to the operator, a safety gate system will be added to the protective cover (door). Safety door interlocking devices are widely used in the field of industrial safety. ...
|
|
Pilz safety switches – wiring methods for safety switches
1. The switch binding post is generally marked with L, L1, L2. When the L end enters the line, L1 and L2 have one end and L on, and after pressing the switch, the other end of L1 and L2 is connected to L.
2. Peel the thread with diagonal pliers first, and be careful not to leave too long the thread to avoid touching.
3. To the left ...
|
|
Pilz: IEC 62443 – Industrial Information Security Standard (Part II)
In the context of industrial automation, the term "safety" refers to the functional safety of equipment, which means that people and the environment are protected from damage from foreseeable coercion from machines, and the residual risk is more or less always present, but the residual risk cannot exceed the acceptable level. Through the use of security relay ...
|
|
Peel magnetic relays – testing of relays
(1) Measure the resistance of the contact: use the resistance of the multimeter to measure the resistance of the normally closed contact and the moving point, and the resistance value should be 0; The resistance between the normally open contact and the moving point is infinite. From this, it is possible to distinguish which is a normally closed contact and which is normally open.
(2) Coil resistance: multimeter R...
|
|
Peel magnetic relays - an introduction to the classification of relays and their functions
1. The role of intermediate relays
It plays the role of converting and transmitting control signals, that is to say, its input signal is the energizing and power-off signal of the coil, and the output signal is the contact action of the intermediate relay. Essentially, it is a type of voltage relay ...
|
|
How to use Pilz safety relays
When using Pilz safety relays, it is necessary to pay attention to the correct way to use them. The key to the correct use of safety relays is to protect the wiring method of the input circuit. In general, the wiring method of the safety relay is divided into three types.
|
|
Pilz was invited to attend the China Equipment Manufacturing Industry Youth Safety Expert Forum
Recently, the inaugural meeting of the Youth Safety Expert Working Committee of China Machinery Industry Safety and Health Association and the first China Equipment Manufacturing Youth Safety Expert Forum were held in Chengdu, Sichuan.
|
|
REASONS FOR USE OF PILZ SAFETY RELAYS
Why can't ordinary relays be used in safety-related applications?
Ordinary relays use the mechanical action of coils and metal contacts to switch loads. Metal contacts may be fusion welded due to repeated operations. Once this happens, the machine will also be ...
|
|
Peel magnetic relays – the characteristics and working principle of relays
When the input quantity (such as voltage, current, temperature, etc.) reaches the specified value, the electrical appliances that make the output circuit to be controlled on or off can be divided into two categories: electrical quantity (such as current, voltage, frequency, power, etc.) relays and non-electric (such as temperature, pressure, speed, etc.) relays.
|
|
Contact
working hours
