1. LMC058 & LMC078 Modicon Motion Controller Product Information
Faster machine planning
The motion controller uses the same programming software as the PLC;
Custom-made utility blocks for complex use;
Dedicated motion function library for programming, debugging, and diagnosis.
Save space, cost, installation and maintenance time
Integrated motion control and logic control
Convenient long-distance transparent commissioning and diagnosis
LMC058 Progressive Machine Function
Servo axis synchronization : up to eight axes
Synchronization function: 2ms synchronization of 4 servo axes
Digital I/O : Up to 2400 digital I/O
Analog: 12 or 16 bit resolution
Other functions
> Spindle encoders
> Capture Input/Reflection Output
Attachable devices
> Inverter, servo
> Human-machine interface
> Upper layer communication: Ethernet communication
The LMC078 is more functional
Servo axis synchronization : up to 16 axes
Synchronization function: 2ms synchronization 16 axes, 1ms synchronization 8 axes
The LMC078 uses the high-speed Secos III bus protocol
CANopen interface expansion can be strong
An external encoder can be connected
Built-in 12-point digital input/8-point digital output
2. ATV-IMC built-in programmable control card product information
Make your drives smarter
Suitable for more complex operations (2MB RAM)
Reduced program download time (Mini-B USB Connector)
Open communication with other system devices (built-in Ethernet connection and CANopen port)
An increasingly open human-machine interface
Direct customization of the graphic display of ATV series inverter (8 lines and 24 characters)
Dedicated ATV-IMC menu
Customizable menus for a variety of uses
Open and easy to communicate
With FDT/DTM skills, CANopen allows for complete and transparent access to everything else in the architecture
3. Modicon M221 Programmable Controller Product Information
Designed for simple machine planning, the compact and stable manipulator is ideal for optimising installation space and improving machine functionality.
The CPU computing ability is extremely strong, the body has built-in high-speed counting, pulse output, analog input and supports Ethernet and Modbus communication.
4. Modicon M238 Programmable Controller Product Information
24VDC or 230VAC
Transistor output or relay output 14 in and 10 out
IP20 degree of protection
Operating temperature -10°C to +55°C
The CANopen master is built-in
Two serial interfaces RJ45 sockets
8 channels of 100K single-phase high-speed counting or two channels of 100K dual-phase high-speed counting
2 channels of 100K high-speed pulse output
400-900Kb program capacity
CE, UL, CSA, ACA (C-Tick requested), GOST (requested)
Warranty: 18 months
5. Modicon M241 programmable controller
The M241 series programmable manipulator based on the SoMachine V4 channel is suitable for high-performance machine operation with motion control function
High-speed dual-core CPU processor, leading the market in function
The body has built-in high-speed counting and pulse output
The communication is powerful, supporting Ethernet, CANOpen, serial communication, and can be equipped with TM4 communication expansion module
TM3 expansion is selected, which is 10 times faster than TM2, and supports SD card, TMC4 expansion board, etc
6. Modicon M251 programmable controller
The M251 series of programmable manipulators based on the SoMachine V4 channel is a modular and distributed architecture that provides customers with innovative, high-performance solutions
Book-type body, modular expansion, compact space, sensitive equipment
The CPU core processing ability is excellent, and the built-in super communication ability, the ontology supports CANOpen, up to 2 Ethernet, open, sensitive, and can easily complete the distributed architecture
The full range of TM3 and TM4 expansion modules are supported to escort your distributed architecture
7. Modicon M258 programmable controller
8-channel 200K high-speed counting of the body
There are 2 x 100KPWM outputs on the main body
All built-in Ethernet
The body has a built-in CANopen bus master station and supports 32 slave stations
The maximum number of extensions is 250
128M high-capacity Flash Rom
64M large-capacity memory
Built-in two USB 2.0 ports
Warranty: 18 months
8、Modicon TSX Micro
Dedicated PLCs for OEM machine builders
128K storage
The processing time of the case instruction is only 0.15 μs
Special functions: counting, position control, PID control, mathematical processing, ambiguous control, etc
Support multi-task system (main task, quick task, task task)
Sensor/actuator buses with multiple Ethernet communications
Complete maintenance of user data, programs
Warranty: 18 months
9. Modicon series M100 programmable controller
The best selection of simple machines saves money for users
AC power supply
High-speed processor with 0.2μs/boolean amount
Built-in RS485 communication port
Supports Micro SD card
2 channels of 100KHz high-speed counting and 4 channels of 5KHz fast counting
SoMachine Basic software channel
10. Modicon series M200 programmable controller
"Small size, big wisdom", made on demand, simple and easy to use
AC/DC power supply
High-speed processor with 0.2 μs/boolean
There is a built-in RS485 communication port
Built-in Ethernet port (some models)
The program can be downloaded via USB power supply
Supports Micro SD card
2 channels of 100KHz high-speed counting and 4 channels of 5KHz fast counting
2 x 100KHz pulse output
Supports up to 2 expansion boards
Up to 4 TM3/TM2 expansion modules are supported
11、PacDrive3
A complete machine automation solution
Based on the seasoned motion control and logic control skills, the PacDrive3 series combines logic, motion and robot control functions in the same hardware channel.
The PacDrive3 can be used in a wide range of packaging machines and other systems, such as disassembly, assembly systems and robotic handling. The program architecture conforms to the IEC-61131-3 program structure specification.
12、PL7
Micro & Premium equipment software
No additional programming is required for special utility modules
Choose from > 4 languages
> Predefined functions
> DFB utility block
> Online modification
> Dynamic data tables
Warranty: 18 months
13、SoMachine
OEM automation channel
It is suitable for Schneider OEM PLC, HMI, Motion, VSD software channels, which are simple and easy to use, improve power and save costs.
1 program download
1 project document
1 cable connection
1 software channel
SoMachine V4 - the complete solution for machine builders
SoMachine software is an open, efficient and professional software solution integrated with Vijeo-Designer. It also integrates equipment and conveyor tools for motion control devices. It has a linguistic function in accordance with the IEC 61131-3 specification, and integrates multiple functions such as fieldbus equipment program, expert diagnosis and fault debugging, as well as maintenance and visualization. Advantages: Abundant expansion, dexterous use, cost-effective, stable and reliable.
|
More on that
|
Commissioning steps for Schneider drives
1. Type recognition: Recognize whether the type of inverter is common with the type of inverter purchased.
2. Transportation acknowledgement: After opening the package, check whether the inverter is damaged during transportation.
3. Voltage recognition: the power supply voltage on the site should be borne by the inverter.
|
|
Precautions for the use of Schneider AC contactors
There are many series of contactors: LC1-SK series: below 6ALC1-K series: 6A-16ALC1-D series: 9A-150ALC1-F series: 115A-800ALC1-B series: 750A-1800A
When installing, it should be in accordance with the regulations...
|
|
Schneider ATV312 inverter failure
1. OLF is motor overload.
Possible reasons: 1. Triggered by high motor current. 2. The value of the [cold stator resistance] (rSC) parameter is wrong.
Corrective measures: 1. Check the [Motor Thermal Current] (ItH) setting of the motor thermal maintenance function and check the motor load. Wait...
|
|
Schneider AC contactor precautions
There are many series of contactors: LC1-SK series: below 6ALC1-K series: 6A-16ALC1-D series: 9A-150ALC1-F series: 115A-800ALC1-B series: 750A-1800A
When installing, it should be in accordance with the regulations...
|
|
Advantages and disadvantages of orifice flowmeters – Schneider
The orifice flowmeter is a high-range ratio differential pressure flow device composed of a standard orifice plate and a multi-parameter differential pressure transmitter (or differential pressure transmitter, temperature transmitter and pressure transmitter), which can measure the flow rate of gas, steam, liquid and natural gas. Widely used in petroleum, chemical, metallurgy, electric power ...
|
|
Schneider Lexium ILA all-in-one AC servo
The Schneider Lexium integrated drive consists of an electric motor and a control circuit that announces the control signal via a fieldbus, pulse/direction interface or I/O interface (for internal motion tasks).
High compactness: motor and control circuits ...
|
|
Schneider inverter control circuit
1. What is a control loop?
The network that supplies the control signal to the main circuit that supplies power to the asynchronous motor (voltage and frequency can be adjusted) is called the control loop.
Second, the composition of the control loop
The control circuit is controlled by the frequency ...
|
|
Introduction to Schneider inverter inverter
The inch movement in Schneider inverter means that the control signal can drive the motor intermittently according to a certain law, and the motor strictly follows the dynamic and stop command action of the control signal, and the motor does not roll by inertia during the shutdown. It's like moving an inch and then stopping.
The full name of Schneider inverter is "...
|
|
Schneider ATV610 inverter applications
The Schneider ATV610 inverter is suitable for specification loads and can be used in a wide range of industries and infrastructure. Including: petrochemical, power plant, industrial and civil buildings, water treatment and sewage treatment, HVAC, thermal heating, constant pressure water supply, and other applicable occasions. In these jobs ...
|
|
Advantages and disadvantages of closed busbars compared with open busbars - Schneider
The advantages of closed busbars over open busbars are:
1) Closing the bus duct can reduce the grounding fault, avoid the short circuit between phases, basically eliminate the grounding defect caused by external moisture, dust and foreign objects, and improve the continuity of generator operation.
2) Eliminate ...
|
|
Inverter selection and capacity matching - Schneider
In addition, it is unscientific to select the inverter body alone, without considering whether the inverter selection and capacity matching are appropriate.
...
|
|
Inverter power settings, waveform test issues
1. After the inverter is repaired, the power number demand is corrected, don't forget
Generally, an inverter corresponds to a power number (also known as the number of horsepower), for example, a 75 kilowatt inverter is set under heavy load, and 100 kilowatts is set under light load. In this way, the customer will not use it to present ...
|
|
Schneider inverter maintenance precautions
Schneider Electric intelligent special effect inverter maintenance, the daily maintenance of the inverter mainly depends on your use environment, such as moisture-proof, dust-proof, anti-foreign body ingress, pay attention to whether there is any abnormal sound when usually protecting.
Attention to the needs of inverter protection ...
|
|
The UPS boot panel does not show that the UPS is not working - Schneider
Problem: After the UPS is turned on, there is no display on the panel, and the UPS does not work
Problem analysis: Judging from the problem phenomenon, the problem lies in the mains input, the battery and the mains detection part and the battery voltage detection loop:
1. Check ...
|
|
Schneider miniature circuit breaker code calling
Schneider miniature circuit breaker code marking method
For example: 1-C65N-C20A/2P+VE+30mA+SD, the meaning of each item is:
1--------- identification number
C65 ------ serial code
N -------- breaking ability, N is 6000A, H is 10000A, L is 15kA
...
|
|
Schneider PLC signal light meaning
Take the Schneider PLC with model number TWDLCAA40DRF as an example:
The first PWR: is the meaning of power supply;
The second RUN: is the PLC operation indicator; Long dark: The application is not fulfilling; Shine: The controller is in a stay or a mistake in performance; Solid on: The controller is in operation ...
|
|
Precautions for the use and maintenance of instruments and meters - Schneider
Attention should be paid to the following matters during the use and maintenance of the appearance of the instrument:
1. Don't blindly knock and bump when overhauling, so as not to expand the problem, and the more you repair, the worse it will become.
2. Do not plug and unplug various control boards and plugs with electricity. Due to the power-on ...
|
|
THE DIFFERENCE BETWEEN SCHNEIDER CIRCUIT BREAKER EASYPACT AND MASTERPACT
First of all, both are low-voltage circuit breakers (below 1000V)
Let's start with Schneider Masterpact, which is a structural circuit breaker. The current rating of the structure varies from 800A ---- 6300A. The Masterpact series is divided into M series and MT series. The M series has been on the market since 1986 and was screened and delisted in 2002.
|
|
Key points of operation of Schneider disconnectors
Features of Schneider Barrier Switch: First of all, Schneider Barrier Switch can be used to block the power supply, it can disconnect the live equipment from the high-voltage maintenance equipment, and can also see the obvious disconnection point on it. Secondly, Schneider barrier switches can cooperate with circuit breakers to change the operation of the system.
|
|
Maintenance of Schneider circuit breakers
In order to keep the main Schneider circuit breaker in excellent operating condition, it is necessary to strengthen the maintenance management.
1. Insist that the air is moist or unclean, and the pipes are not clean, may have the following consequences:
(1) The wet gas is decomposed into mixed gases such as hydrogen and oxygen under the action of electric arc, which damages the ...
|
|
Contact
working hours
