Commissioning steps for Schneider drives

Create Date: 2024-8-30 12:03:23|Source: Schneider/Schneider

1. Type recognition: Recognize whether the type of inverter is common with the type of inverter purchased.

2. Transportation acknowledgement: After opening the package, check whether the inverter is damaged during transportation.

3. Voltage recognition: The power supply voltage on site should be within the voltage range of the inverter. Otherwise, all the following steps stop.

4. Step mechanical installation

                               Commissioning steps for Schneider drives

5. Insulation measurement of motor and inverter: then connect the inverter: according to the drawing, connect the motor line to T1, T2, T3 to ensure that the connection and voltage are common; After ensuring that the power supply is closed, connect the main power supply to R, S, T: connect the control source: connect the source with a given speed. There is a network of connections.

6. Power-on debugging and speech correction: Speech selection will be displayed after powering on. (This correction is only required for the first time when the power is on)

7. Restore factory settings

8. Correction of access level

9. Set motor parameters: power, voltage, current, frequency, speed, etc., and self-tuning

10. Set acceleration and deceleration time: Set a reasonable acceleration and deceleration time

11. Set maintenance parameters: thermal maintenance current value of the motor, current limit value, etc.

12. Set the control source and frequency source: Set the channel of the inverter in the 1.6 instruction, and the channel with a given frequency. Set the highest frequency, lowest frequency, and so on.

13. Assign application functions with application functions: such as braking logic control.

14. Confirm the steering of the motor: Given a small frequency, jog the inverter to recognize the steering of the motor; If the opposite is true, the parameter PHr in 1.4 can be corrected.

15. Record the current value of several frequency bands

More on that
Safety PLC is different from ordinary PLC Safety PLC is different from ordinary PLC

A safety PLC differs from conventional PLCs in that it needs to be certified for safety by a third-party professional organization and meet stringent international standards for safety and reliability. There is a need for a thorough systematic approach to the planning and testing of safety PLCs. TUV*** in Germany and FM*** in United States ...

Introduction to the transformer connection group - Schneider Introduction to the transformer connection group - Schneider

In the transformer planning process, the choice of wiring method is often not paid attention to. The three-phase transformer has A/B/C three-phase winding on the 1/2 side. The connection between them has a great impact on the operation performance of transformers, especially distribution transformers, and directly affects the quality of power supply. Therefore, the wiring ...

The inverter controls the direction of the motor – Schneider The inverter controls the direction of the motor – Schneider

If the direction of rotation at this moment is opposite to the steering required by the equipment, please put F0-13=1 or after power-off (note that the main capacitor charge discharge of the inverter is over), the UVW output line of the inverter ...

Schneider ATV71 selection and letter meaning Schneider ATV71 selection and letter meaning

The type of Schneider inverter generally reflects the rated voltage, rated power, and load requirements of the inverter (heavy or light load). Here are two examples: Example 1: Schneider Inverter Type: ATV71HD11N ...

The operation essentials of Schneider disconnectors The operation essentials of Schneider disconnectors

Schneider Barrier Features: First of all, Schneider Barrier Switch can be used to block the power supply, it is able to disconnect the live equipment from the high-voltage maintenance equipment, and it can also see a significant disconnection point on it. Secondly, the Schneider barrier switch can be used with the circuit breaker to change the operation of the system.

The difference between vector and general use of inverter - Schneider The difference between vector and general use of inverter - Schneider

1. The control accuracy of the vector type is higher than that of the general-purpose type. 2. The vector type has a large output torque at low speed, which can make the motor get a larger starting torque, which is suitable for application in the occasion of heavy load starting, such as: high-power long belt, hoist, etc. If used in some of the more common fields ...

Schneider Electric inverter applications Schneider Electric inverter applications

Schneider inverter, the full name of "Schneider communication inverter governor", is a well-known inverter brand developed, manufactured and sold by Schneider Electric Group in France. It is mainly used to control and regulate the speed of three-phase communication asynchronous motor, with its stable performance, rich combination functions, outstanding ...

Introduction to the core knowledge and application of instrumentation - Schneider Introduction to the core knowledge and application of instrumentation - Schneider

Although the "measurement and control skills and instruments" category of majors touch the fields of national defense, aerospace, aviation, sailing, railway, machinery, light industry, chemical industry, electronics, electric power, telecommunications, metallurgy, petroleum, mining, geology, surveying and other industrial, agricultural and scientific research categories, the Ministry of Education has a special understanding of "measurement and control skills and instruments".

The 7 peripherals of the inverter governor - Schneider The 7 peripherals of the inverter governor - Schneider

1. Air circuit breaker is an active electrical appliance that can not only touch and disconnect the circuit normally, but also operate under abnormal conditions such as overcurrent, reverse current, short circuit and loss (under)voltage. Its primary role is to maintain the electrical equipment in the AC and DC circuits, and it can also operate the circuits infrequently. ...

Servo motor selection process – Schneider Servo motor selection process – Schneider

1. Load organization (acknowledging the type of tissue and its specific data, such as ball screw length, ball screw diameter, stroke, pulley diameter, etc.) 2. Form of action (acknowledging the form of action of manipulating the target, the relationship between time and speed; Will manipulate ...

Schneider AC inverter usage category Schneider AC inverter usage category

Under the IEC60947-4 standard, the Schneider communication contactor TVR series must be able to turn on and break the current value, and these currents depend on the type of break that the load is turned on, including squirrel cage or slip ring motor, resistor, when the switch or break is generated in the motor abort, start or run...

Schneider medium-voltage inverters focus on energy saving Schneider medium-voltage inverters focus on energy saving

Because the impact of foreign electrical products on domestic electrical equipment is relatively large, now Schneider inverter equipment occupation is facing a big technical promotion, taking inverter as an example, the national connotation of inverter shopping mall domestic brand and foreign brand, regardless of technology, processing and manufacturing, industrial design and other aspects are still ...

Schneider inverter maintenance precautions Schneider inverter maintenance precautions

Schneider Electric intelligent special effect inverter maintenance, the daily maintenance of the inverter mainly depends on your use environment, such as moisture-proof, dust-proof, anti-foreign body ingress, pay attention to whether there is any abnormal sound when usually protecting. Attention to the needs of inverter protection ...

Factors influencing the differential thermal analysis of instrumentation - Schneider Factors influencing the differential thermal analysis of instrumentation - Schneider

The operation of differential thermal analysis is simple, but in practical work, it is often found that the same sample is measured on different instruments, or different measurements are measured on the same instrument, and the results of the differential thermal curve of industrial electrical appliances are different. The high temperature, shape, area, and size of the peaks will all change. ...

NSX molded case circuit breaker selection - Schneider NSX molded case circuit breaker selection - Schneider

The Schneider NSX molded case circuit breaker has a double rotary contact construction for maintenance, and the high-end electronic trip unit allows for accurate measurement and easy communication. Schneider NSX molded case circuit breaker conforms to IEC60947-2, GB14048.2, China's CCC certification and multinational classification certification...

Schneider Lexium ILA all-in-one AC servo Schneider Lexium ILA all-in-one AC servo

The Schneider Lexium integrated drive consists of an electric motor and a control circuit that announces the control signal via a fieldbus, pulse/direction interface or I/O interface (for internal motion tasks). High compactness: motor and control circuits ...

Selection and control of the inverter installation - Schneider Selection and control of the inverter installation - Schneider

Frequency converters are widely used equipment in modern industry. If you want to complete the functions of soft stop, soft start, stepless speed regulation or special requirements for speed rise and fall, you need the more advanced speed control equipment in modern asynchronous motors - frequency converters. The main circuit of the equipment is selected to communicate - DC - communication ...

The role of Schneider instrumentation in the air separation process The role of Schneider instrumentation in the air separation process

The appearance of the instrument plays a very important role in the air separation equipment and gas purification process, and it is indispensable for the adjustment of the air separation process and the detection of product quality. Because there are different types of on-line profiles for monitoring targets in different gaseous media at each stage of the ASU process, the ...

Schneider inverter has misunderstandings in practical applications Schneider inverter has misunderstandings in practical applications

Myth 1: Whether the inverter can complete power saving The use of inverters can save electricity Some literature claims that inverters are power-saving control products, giving people the impression that only the use of inverters can save electricity. In practice, The reason why the inverter can save electricity is because it can ...

Key points of operation of Schneider disconnectors Key points of operation of Schneider disconnectors

Features of Schneider Barrier Switch: First of all, Schneider Barrier Switch can be used to block the power supply, it can disconnect the live equipment from the high-voltage maintenance equipment, and can also see the obvious disconnection point on it. Secondly, Schneider barrier switches can cooperate with circuit breakers to change the operation of the system.

CATEGORIES BYPASS
Customer Service Center

Online Consultation:QQ


ContactContact

Contact: Manager Huang

Contact QQ: 3271883383

Contact number: 13522565663


Scan the code to add WeChat (please save the picture first on the mobile phone)

working hoursworking hours

Weekdays: 9:00-17:00

Holidays: Only emergencies are handled

Contact us

Contact us

Contact number QQ consultation
QQ consultation

3271883383

Company address
Back to top