The coordinate conversion of KUKA robots is subject to conditions

The KUKA robot is turned on, the power cord of the battery is not connected, and the demand is plugged in, X305! Check the wiring under the machine control cabinet 1. XS1 power interface 2. X7.1 additional shaft (7) motor connection ...

1. According to the mode of movement, it can be divided into: wheeled mobile robots, walking mobile robots (single-legged, double-legged and multi-legged), crawler mobile robots, creeping robots, peristaltic robots and swimming robots; ...

1. Disconnect all power supply from the control cabinet. 2. View the motherboard, storage board, accounting board, and driver board. 3. Check that there is no debris and dust in the cabinet, check the sealing, and clean the appearance of the robot control cabinet.

Industrial Robot Motion Programming: 1. Understand the industrial robot, the operating environment setting of the teach pendant, and the use of programmable buttons of the teach pendant; 2. Manually operate the robot, the robot I/O communication interface, standardize the I/O board and equipment; 3. Establishment and storage of program data, ...

1) Comfort degree: This is an important goal that reflects the flexibility of the robot. Generally speaking, it is possible to reach 3 degrees of freedom in the robot working space, but welding must not only reach a certain position in the space, but also ensure the spatial attitude of the welding (cutting objects or welding tongs). Thus...

KUKA Industrial Robots The KR CYBERTECH ARC NANO product family offers unrivalled functionality and power density in the load range of 6 to 10 kg. The KR CYBERTECH nano series can be adapted to customer-specific needs and is suitable for a wide range of general rail applications.

The force sensor is used to detect the external force information, and the force signal is converted into the azimuth of the robot. Compliance exercises are implemented in a five-joint robot. Robot teach pendant repair advocates the use of real-time gravity and clash compensation to complete direct education without torque sensors. A method of free force manipulation is proposed ...

There is no program display when the KUKA robot is restarted, that is, the gun cleaning program has been deleted, maybe the name of the program has been changed. Of course, KUKA robots have programs, KUKA robot bodies, handheld teaching programmers and control cabinets, there are all kinds of circuit boards, circuit boards are required to program ...

1. Robot welding can improve the output power The six-axis welding robot has a short response time and fast action. The welding speed is 50-160cm/min, which is much higher than that of manual welding (40-60cm/min). The bot does not abort during operation. As long as external hydroelectric conditions are ensured, ...

Industrial manipulator arm is a new type of mechanical equipment in mechanization and automatic production, in the process of automatic production, the use of a kind of automatic equipment with grasping and moving, mainly in the process of simulating human actions to complete the operation, like the replacement of personnel to transfer serious objects ...

How can I troubleshoot KUKA robots simply? 　　KUKA robots work on the same principle of reciprocating work, and a good robot requires the combination of hardware and software to achieve the desired working results. For example, self-learning memory programming, etc., obstacle automatic detection bypass function, ...

1. Robot selection An industrial robot is a complex system, including manipulators, control systems, programmers and other software and accessories. Before use, it is necessary to select according to the actual production requirements of the enterprise and choose the products suitable for their own production line. Selected Guideline Packet ...

According to the use and development needs of KUKA welding robots, traditional welding methods cannot efficiently meet the production needs to a certain extent, and arc welding robot skills are increasingly valued by manufacturers. How to complete mass production efficiently and efficiently with arc welding robots is the most important thing to do.

1. Program control system: apply a certain rule of control to each degree of freedom, and the robot can complete the required space orbit. 2. Adaptive control system: when the external conditions change, in order to ensure the required quality or in order to improve the control with the accumulation of experience...

Introduction to logic programming, the input and output terminals are used in logic programming, and in order to communicate with the peripheral devices of the robot control system, digital and analog input and output terminals can be used. TO THE KUKA MACHINE ...

After the KUKA robot is turned on, the teach pendant displays KSS15101 fault code, which means that the five safety nodes of the safety device from 0 to 4 channels are wrong, and the robot cannot be put into normal operation. First of all, the KUKA robot is repaired ...

First, electrical connection Second, the initial power-on Third, security configuration Fourth, the robot zero point correction Fifth, I/O configuration seline; "> It is necessary to fix the robot before it can be powered on to operate the robot ...

1. Welding positioner. There are many specifications of welding positioners, and the common welding positioners are single-axis welding positioners. Two-axis welding positioner. Triaxial welding positioner, etc. It can be applied to different fields according to different models. The welding robot and the welding positioner move in harmony. Welding Robot ...

1. It is necessary to conduct teaching assignments Before the robot performs active welding, it is necessary for the operator to teach the robot the track of the welding gun and set the welding conditions. Because it is necessary to teach, the robot does not weld to a wide range of products produced in a small number of products. 2. There must be ...

1. Rapidity The time between the motor obtaining the command signal and the completion of the required working condition of the command should be short. The shorter the time of echoing the command signal, the higher the sensitivity of the electric servo system, and the better the fast response function.