Robot application notes – KUKA robots

1. When repairing the circuit board, you should understand the vulnerable parts on the circuit board l. When planners plan circuit boards, there are unreasonable local planning that are most likely to present problems. 2. The components frequently used in the circuit board are easy to show hair...

Before the KUKA robot is put into operation for the first time, it is necessary to carry out a review to ensure that the equipment and equipment are in perfect condition, functional, safe and faulty. It is necessary to comply with the labor protection regulations of the country and region of the location, and it is also necessary to test all safety electrical ...

First, the problem phenomenon 1. After the robot is powered on, the A5 axis can only move at a scale of -60-+60 degrees, but the teaching pendant is -120-+120 degrees; 2. From the 'Assist' of the Teach Pendant > 'About' a > 'Robot' to view the robot type, and the robot itself.

1. The structure of the conveyor belt fed at the front end of the claw of the palletizing robot, the roller conveyor belt for bag grabbing generally has a national standard, and the standard interface needs to be selected, and how to achieve it should be considered for the belt conveyor belt. 2. The selection of palletizing robot models, the robot load can be ...

First, the characteristics of parallel robots 1. No accumulated error, high accuracy; 2. The driving equipment can be placed on or close to the direction of the fixed channel, so that the moving part is light in weight, high in speed and has good dynamic response; 3. Compact structure, high stiffness and large bearing capacity; ...

1. Rapidity The time between the motor obtaining the command signal and the completion of the required working condition of the command should be short. The shorter the time of echoing the command signal, the higher the sensitivity of the electric servo system, and the better the fast response function.

For us, it's easy to pick up something unsorted from the trash can – maybe a handkerchief, candy or screws of different sizes. But this is not designed for KUKA robots. "Picking up trash" is a top priority in the automation industry. This is important for robust algorithms in the machine learning discipline ...

Industrial robot teaching is that the programmer selects various teaching methods to "inform" the robot in advance of the action information and operation information. This information is roughly divided into three categories: robot orientation and posture information, trajectory and waypoint information; Robot mission action order letter etc.

Whether it's the agile four-axis SCARA or the nimble six-axis robot, these compact and space-saving KUKA robots are the most agile and robust in the series. You can combine a wide range of four- and six-axis KUKA robots in different sizes in your machine and keep the same ...

Inputs and outputs are used for logic programming, and digital and analog inputs and outputs can be used for communication with the peripherals of the robot control system. When programming the KUKA robot, the ...

back-up controller memory; Supervise the robot at regular intervals to view the robot, wires and cables; Look at the brakes; See how compact the robot is; listen to sounds, vibrations, and noise; Depending on the specific ...

Before the KUKA robot is put into operation for the first time, it is necessary to carry out a review to ensure that the equipment and equipment are intact and functional, that they can operate safely and that faults can be identified. It is necessary for us to comply with the labor protection regulations of the country and region to check, and it is also necessary to test all safety ...

Perform "bias learning" with loads. The difference from the first zero calibration is stored. 1. Place the robot in the pre-zero calibration position 2. In the main menu, select the zero calibration > EMD > with load correction > > deviation ...

The KUKA robot program works in several different ways, which can be selected on the teach pendant. 1. By clicking on the "Program Working Methods" icon, you can check and select different methods Second, the program working methods are respectively [Go], [action], [single ...

1) Comfort degree: This is an important goal that reflects the flexibility of the robot. Generally speaking, it is possible to reach 3 degrees of freedom in the robot work space, but the welding must not only reach a certain direction in the space, but also ensure the spatial attitude of the welding (cutting things or welding tongs). Thus...

Industrial robots are composed of three fundamental parts: the main body, the drive system and the control system. The main body is the machine base and executive tissue, including arms, wrists and hands, and some robots also have walking tissues. Most industrial robots have 3-6 degrees of freedom of movement, during which the wrist usually has 1-3 ...

This function can be used to install KSS updates, e.g. from KSS 8.3.0 to KSS 8.3.1. After installing or updating the KUKA system software, the robot control system always performs an initial cold start. We advocate archiving all relevant data prior to software updates. If needed, it can be ...

The production of high-end equipment shows the concave and convex of a country's comprehensive national strength. At present, China is vigorously developing a series of major projects such as high-speed rail technology, large aircraft projects, nuclear energy projects, aerospace projects, etc., and has made remarkable achievements. These items all have the same characteristic, which is the relative accuracy ...

1. Number of robot axes. The number of axes of the robot affects the degree of freedom, if it is for a simple straight to go occasion, for example, a belt line from one side to the other, choose a simple four-axis robot; If the robot does not have much room to move, but the demand machine ...

KUKA palletizing robots are widely used to move goods to or from pallets (unloading palletizing) and to lift, palletize, pack, transport, sort and mark. This process is not only closely related to the wooden furniture industry, the food logistics sector, but also ...