How mobile robots are classified – KUKA robots

In order to depict the composition of the rigid body in space, it is necessary to attach the coordinate system of the target, and then confirm the composition of the coordinate system (origin orientation and the sentiment of the three coordinate axes), that is, 6 degrees of freedom are required to adequately depict the posture of the rigid body [1]. For industrial robots, something needs to be installed on a normal board ...

The robot control system is the brain of the robot and the primary element that determines the function and function of the robot. The control system is to retract the command signal from the drive system and the implementation organization according to the input program, and control it. Control system ...

1. Problems in the load setting of KUKA robots In fact, there is only one purpose, the appropriate load, under the appropriate driving force, the manipulator can withstand the inertia moment that satisfies both static and dynamic, so as to ensure that the electrical control system controls the manipulator. and other machines ...

1. Able to carry out high-precision packaging operations According to the integration of the stacking robot with other machinery and equipment, the intelligent robot can completely complete the original messy packaging operation, saving a lot of labor for the company and making due contributions to the company's intelligent production and production. ...

How to choose the right robot dresspack? KUKA robot agent dresspack selection is to consider the robot model, the use of the robot, action (such as for welding, grabbing, etc.), the way of the pipeline, the number of pipelines, specifications, etc., according to the actual situation of the industrial robot to select the appropriate ...

In industrial robots, what is stuff load data? Stuff load data refers to the load of everything that is mounted on the flange of the robot. It is additionally mounted on the robot and moved by the robot along with the mass. Need to lose ...

Collaborative robots are only a very important subcategory in the entire industrial chain of industrial robots, which has its best advantages, but the disadvantages are also obvious: in order to control the force and bump ability, the operation speed of collaborative robots is relatively slow, generally only one-third to one-half of traditional robots. ...

1. Auxiliary points Type: POS, E6POS, FRAME If all the weights of the auxiliary points are not given, the controller will apply the value of the previous azimuth to the short weight. The postural angle within an auxiliary point, as well as the condition and data, are in principle overlooked. The track is not approaching the auxiliary point. ...

1. Protect content 1. Check the heat dissipation of the controller It is forbidden to cover the manipulator with plastic or other materials; Leave a satisfying distance between the rear and side of the controller (>120mm); It is forbidden to place the controller close to the heat source; It is forbidden to put debris on the top of the controller; Prevent the controller from being too dirty; ...

One: The switch jumps often and may not be able to close? 1. Aging of switches 2. The switch selection is incorrect 3. The pump is stuck or the motor is short-circuited 4. The line is aging, short circuit, and the line is too small or lacks phase. Solution: Turn off the power of the control system...

1. It is necessary to keep the robot control system closed and adopt protective measures to prevent accidental restarts. 2. Disconnect the power cord. 3. Everything is protected under the premise of security, and this article is not responsible for any problems with the presentation. ...

To carry out industrial robots, we should focus on creating six iconic products, five key components, and four basic capabilities. In this issue, Zhongfa Intelligent Manufacturing introduces five key components - high-precision reducer, high-performance robot special servo motor and drive, high-speed and high-performance controller, and transmission.

The TCP of the robot moves to the target point at the fastest speed, and this movement is called the PTP motion of the robot. Since the axis of the robot is rotary, the arc track is faster than the straight track. The specific course of the movement is unpredictable. The first movement in the program must be the PTP ...

From the perspective of customers in the domestic market, due to the high sensitivity and low cost of collaborative robots, small and medium-sized enterprises are the main force in the use of collaborative robots. In addition, from a practical point of view, China's aging trend is becoming more and more significant, and the cost of domestic labor continues to rise. The manufacturing industry seeks to find more ...

　　(1) If the rotor of a KUKA motor is unbalanced, and the dynamic balance of the motor rotor is defective or deteriorates after use, an oscillation source similar to an oscillating motor may occur. (2) Twists and turns of the hinge, the condition of the twists and turns of the hinge ...

Recently, KUKA has recently launched the KR CYBERTECH series of Edition robots suitable for general industries, which has the characteristics of reliable functions and lower total investment costs, and is suitable for transfer, grinding, installation, loading and unloading packaging, palletizing, arc welding and other uses, so that the entry-level automatic ...

Manipulator positioners are generally divided into compound positioners, single-axis positioners, double-axis positioners and three-axis positioners according to the number of components of the drive motor. Before and during the welding operation of the robotic arm, the positioner loads and locates the welded workpiece by clamping the stuff.

Most of the fieldbus communication failures of KUKA robots are divided into the following five situations. Fault 1: Unable to communicate through the diagnostic program interface. Causes of failures: data cables, peripherals, fieldbus cards, etc.

1) Comfort degree: This is an important goal that reflects the flexibility of the robot. Generally speaking, it is possible to reach 3 degrees of freedom in the robot working space, but welding must not only reach a certain position in the space, but also ensure the spatial attitude of the welding (cutting objects or welding tongs). Thus...

1. When repairing the circuit board, you should understand the vulnerable parts on the circuit board l. When planners plan circuit boards, there are unreasonable local planning that are most likely to present problems. 2. The components frequently used in the circuit board are easy to show hair...