Denso automatic welding method

Create Date: 2024-8-30 12:03:23|Source: Denso/DENSO

In modern manufacturing, welding has become an indispensable process. With the advancement of science and technology, welding has also undergone great changes. One of the most important aspects is the automation of welding.

The emergence of welding automation can not only greatly improve the power of welding, but also reduce labor intensity and eliminate unavoidable human factors. Among all the automatic welding methods, the most widely used are arc welding, spot welding and laser welding. Below, let's take a detailed look at these three automatic welding methods.

                              Denso automatic welding method

Arc welding

Arc welding is a welding technique in which an electric arc is placed in a weld so that the core in electrostatic or electrowinning welding melts, fills, and blends with the substrate. It is commonly used in melting electrode shielding gas welding (MMA), active gas tungsten argon arc welding (TIG-W), active submerged arc welding (SAW) or gas metal arc welding (GMAW) and other related fields.

The advantage of arc welding is that it has moderate power and can be used for the welding of most metal materials. At the same time, arc welding has a low cost and low impact on the environment, so it is widely used in the industrial field.

spot welding

Spot welding is a welding method that uses the electrode to pass pressure to cause instantaneous local heating between two points on the workpiece and apply welding pressure at the same time, and uses the permeability of molten metal to complete the connection of the weld. Spot welding is widely used in the manufacture of cars and home appliances.

The main advantage of spot welding is its high output power and the ability to complete multiple solder joints at one time, so it is widely used in the industrial field.

Laser welding

Laser welding is a welding method that uses a laser beam to generate a welding heat source, through heat conduction and melting metal, so that the position of the workpiece is welded. It is a high-precision and high-power welding method that has many advantages.

Laser welding has high energy density, high power and high precision welding results. Compared to traditional welding methods, laser welding has better control and higher reliability. It is widely used in the welding of metal materials, such as aviation, aerospace, military, cars, machine tools and other fields.

summary

After the introduction of the three automatic welding methods, we can see that arc welding, spot welding and laser welding have their own characteristics, and there are certain differences in the scope of use. In practical use, we should select the appropriate welding method in combination with practical needs to improve the output power and product quality.

More on that
Daily maintenance and maintenance of welding robots - DENSO robots Daily maintenance and maintenance of welding robots - DENSO robots

One. Daily viewing and protection 1. Wire feeding organization. Including whether the wire feeding force distance is normal, whether the wire feeding catheter is damaged, and whether there is an abnormal alarm. 2. Whether the gas flow rate is normal. 3. Whether the welding torch safety protection system is normal. (It is forbidden to close the welding torch safety protection work) 4. Water cycle system work ...

Precautions for operating the DENSO robot Precautions for operating the DENSO robot

Wear protective gear Personnel who carry out the work should wear safety helmets, safety shoes, and goggles. When applying grease, wear protective gear such as gloves and goggles to prevent the grease from coming into contact with your skin or eyes. Precautions for transportation and equipment operation ...

Installation steps for Denso industrial robots Installation steps for Denso industrial robots

In the field of industrial production, the device of industrial robots is very important, if the device presents a problem, it will not only affect the performance of robot equipment, but also lead to the decline of the service life of industrial robots, and will affect the safety of industrial production, and cause damage to the economic benefits of enterprises.

Offline programming of DENSO robots Offline programming of DENSO robots

For offline programming of Denso robots, RoboDK supports the following two programming languages: In addition, RoboDK's Denso robot driver supports online programming of the RC7 and RC8 controllers. Other versions of the controller may be partially supported. Robot-driven ...

Characteristics of industrial robot joint transmission chain - Denso robot Characteristics of industrial robot joint transmission chain - Denso robot

The drive source of the industrial robot drives the movement or rotation of the joints through the transmission parts, and then completes the movement of the body, arms and wrists. Therefore, transmission parts are important components of industrial robots. According to different transmission types, transmission components can be divided into linear transmission organization and rotary transmission group.

DENSO's COBOTTA compact collaborative robot weighs only 3.8 kg DENSO's COBOTTA compact collaborative robot weighs only 3.8 kg

COBOTTA is a desktop-class collaborative robotic arm launched by Japan's DENSO DENSO, which has been researching robots for 50 years in order to improve the automation of in-house factories. COBOTTA's human-friendly, compact and convenient planning allows users to quickly and easily ...

Denso attended the 15th China International Industry Fair with its small robots Denso attended the 15th China International Industry Fair with its small robots

At the 15th China International Industry Fair held in Shanghai, DENSO, a global manufacturer of automotive parts, showcased its innovative technologies such as the "New VS Series," a high-speed and easy-to-use small industrial robot (also known as a robot). ...

Direct control mode of the DENSO robot teach pendant Direct control mode of the DENSO robot teach pendant

The direct form of the MC8 series is clarified. In direct form, when the motor power supply is blocked, the axis can be moved by hand (without using a multi-function trainer) to teach the posture variable (J, P, and T-type variables). 1 ...

The difference between "four" and "six" in industrial robots The difference between "four" and "six" in industrial robots

Among the four-axis SCARA robots and six-axis articulated robots, the four-axis robots are specially planned for high-speed pick-and-place operations, while the six-axis robots provide higher flexibility in production movements. Four-axis robot The first two joints of the SCARA robot are capable of left ...

The main input and output interface of the robot - the DENSO robot The main input and output interface of the robot - the DENSO robot

(1) I/O port I/O input inlet, including welding start, stop, reset, welding mode selection and welding car and torch adjustment and other 16 switch inputs, plus pendulum center photoelectric sensor switch input, sharing 17 I/O input points I/O outputs, three stepper ...

The DENSO Robot Selection Table provides a quick overview of DENSO robots The DENSO Robot Selection Table provides a quick overview of DENSO robots

As a world-renowned manufacturer of automotive parts, DENSO not only develops DENSO robots, but also uses them. Denso is developing unique products based on the high level of technical expertise and adaptability it has cultivated in the development of automotive parts. DENSO not only puts DENSO machines ...

DENSO Robot WINCAPS III. Menu item "Edit" function DENSO Robot WINCAPS III. Menu item "Edit" function

Come back Cancel the first operation and come back to modify the status. From scratch When you go back to the original modified state with "Back", perform the canceled operation again. shear In the program modification window ...

Programming, debugging and simulation of industrial robots - DENSO robots Programming, debugging and simulation of industrial robots - DENSO robots

After learning the manual control, we have to start learning how to program the robotic arm to work actively according to the program we have written. At this stage, we need to learn the fundamental instructions and functional functions of the robot, and the content of this stage is slightly more difficult than the previous stages.

DENSO unveils a new entry-level large-scale parts assembly robot DENSO unveils a new entry-level large-scale parts assembly robot

At ATX West, the 2020 World Automation Skills Expo in Anaheim, United States, DENSO Investment Co., Ltd., headquartered in Japan, presented a new series of high-performance industrial robots for entry-level manufacturers that can be used to make large parts. ...

Accurate operation of the multi-functional trainer – DENSO robots Accurate operation of the multi-functional trainer – DENSO robots

Multi-function trainer with hand-held approach with two-tier safety switch Grasp the multi-function trainer with both hands to operate. To ensure safety, there are two levels of safety switches on the multi-function trainer. It is necessary to firmly grasp the control panel (which also functions as a motor SW) in order to perform precise operation. ...

The difference between a new robot and an old robot The difference between a new robot and an old robot

A new type of welding robot The new robot has a brand new packaging, it's clean, but what else? When you buy a new welding robot, you get a guarantee that the machine will work within the standard range for a certain period of time. You also got a past without any problems ...

The way the wrist moves of an industrial robot The way the wrist moves of an industrial robot

Industrial robots are an important part of modern industrial production, and their role in the production line cannot be ignored. The wrist of the robot is one of the key parts of the robot, which determines the type and precision of the mission that the robot can complete. There are many ways to move the wrist of industrial robots, and each ...

Cybernetics in mobile robots – DENSO robots Cybernetics in mobile robots – DENSO robots

1. Mobile robot motion control "The world's martial arts, only fast is not broken", mobile robots generally control the wheels through the motor to complete the movement. As the end fulfillment mechanism, the motion control of the motor requires fast response (millisecond-level echo time) and high precision. Now, the typical motor ...

Precautions when welding robots – DENSO robots Precautions when welding robots – DENSO robots

1. It is necessary to conduct teaching assignments Before the robot performs active welding, it is necessary for the operator to teach the robot the track of the welding gun and set the welding conditions. Because it is necessary to teach, the robot does not weld to a wide range of products produced in a small number of products. ...

Problems in the cybernetics of mobile robots – Denso robots Problems in the cybernetics of mobile robots – Denso robots

1. Mobile robot motion control "The world's martial arts, only fast is not broken", mobile robots generally control the wheels through the motor to complete the movement. As the end actuator, the motion control of the motor requires fast response (millisecond-level echo time) and high precision. At present, the typical motor ...

CATEGORIES BYPASS
Customer Service Center

Online Consultation:QQ


ContactContact

Contact: Manager Huang

Contact QQ: 3271883383

Contact number: 13522565663


Scan the code to add WeChat (please save the picture first on the mobile phone)

working hoursworking hours

Weekdays: 9:00-17:00

Holidays: Only emergencies are handled

Contact us

Contact us

Contact number QQ consultation
QQ consultation

3271883383

Company address
Back to top