The "2013 China Electronic Equipment Industry Expo" hosted by Shenzhen Electronic Equipment Industry Association was held in Shenzhen on August 7-9. A number of leading industrial enterprises displayed new materials, skills and intelligent equipment products, and a variety of high-precision and automated robot products were unveiled. Analysts pointed out that the domestic robot industry is developing rapidly, and a number of large enterprises with financial and technical strength are actively entering the field of robots.
It is understood that this expo exhibited electronic intelligent equipment, automation equipment, electronic tools, opto-mechanical equipment, new materials and components from more than 280 enterprises such as Han's Laser, Jintuo Automation, Jizhirong Technology, Kexin and Kelongwei, demonstrating the advanced skills and new equipment equipped with electronics in the world. Now the domestic industrial robot industry is developing rapidly, many companies and research organizations are committed to the innovation and industrialization of robots, the future is expected to change the situation that China's key components of robots are subject to foreign countries.
Some analysts pointed out that China is now the fastest growing shopping mall in the global robot profession. According to the statistics of the World Federation of Robotics (IFR), the prospects of the world's industrial robot shopping malls are promising, and the demand for industrial robots in China will begin to explode in 2014. According to the data of HC Industrial Robot Network, the robots in service in China now account for about 8% of the global total, and the total demand for robots in China's shopping malls in the next few years will be about 35,000 units, accounting for 16.9% of the global proportion.
Although the timing of the launch of the mall has not yet been clarified, some strategic investors have begun to lay out the industrial robot sector in a big way. According to the data, many fund companies have significantly increased their holdings of robot-related listed companies from the first quarter of this year, and some organizations began to intensively investigate robot-related listed companies from May to July this year. In the view of industry insiders, with the advent of the inflection point of the demographic dividend and the rise in the cost of low-end labor, the replacement of people by machines will become a trend, and the robot profession will give rise to more investment opportunities.
Analysts believe that in the next two years, the scale of the robot mall is expected to break one trillion yuan, coupled with the recent artificial intelligence world conference, the third session of China's World Intelligent Industry Expo held continuously, the mall's attention to robots will also progress, a number of new involved in the robot industry of listed companies are expected to get the love of funds. Now on the A-share market, robot concept stocks include: Qinchuan Development, Huagong Technology, Han's Laser, Tianqi Shares, East China CNC, Baode Shares, Robots, Saiwei Intelligence, etc.
|
More on that
|
How to select the diameter of the welding wire of the DENSO robot
The main consideration in selecting the diameter of the wire is the thickness of the material to be welded. If the wire is selected that is too small for the data, the welding process is underpowered, and time and production costs are wasted, as the welder has to spend more time completing the weld. Because the weld may not be fully permeable ...
|
|
Precautions for the use of bearings for industrial robots - Denso robots
Rolling bearings are delicate components that must be used with correspondingly care. No matter how high-performance bearings are used, if they are not used properly, the expected high performance will not be obtained. The precautions for the use of bearings are as follows:
1. Keep ...
|
|
Features of the DENSO robot dresspack
1. High efficiency: The robot dresspack can carry out comprehensive and efficient inspection and protection operations inside the pipeline. It autonomously traverses the entire pipeline system, reducing the need for human resources and improving operational efficiency.
2. Precision: Through the cooperation of sensors and control systems, ...
|
|
The structure of the industrial robot control system - Denso robot
Teaching box: The operation trajectory and parameter setting of the teaching robot, as well as all human-computer interaction operations, has its own independent CPU and storage unit, and realizes information interaction with the main computer in a serial communication mode.
Operation panel: Composed of various operation buttons, status indicators...
|
|
Classification of the working principle of vacuum suction cups - Denso robots
How many types of vacuum suction cups can be divided into according to the working principle? How does it work?
It is divided into three categories according to the working principle:
· Vacuum suction cups. A vacuum pump is used to pump out the air from the adsorption head to form a vacuum;
· sucking ...
|
|
The DENSO robot DENSO rc8A controller starts
Here, the first thing is to turn on the power supply of the robot controller and motor, and use the multi-function trainer to manually run the robot.
Step 1
Acknowledging security
●Acknowledging that the robot's device is in normal condition.
● Acknowledge that there are no personnel within the robot's range of action.
...
|
|
Daily maintenance and maintenance of welding robots - DENSO robots
One. Daily viewing and protection
1. Wire feeding organization. Including whether the wire feeding force distance is normal, whether the wire feeding catheter is damaged, and whether there is an abnormal alarm. 2. Whether the gas flow rate is normal. 3. Whether the welding torch safety protection system is normal. (It is forbidden to close the welding torch safety protection work) 4. Water cycle system work ...
|
|
Functional characteristics of industrial robots - Denso
The functional characteristics of industrial robots affect the operating power and reliability of robots, and the following functional policies should be considered in the planning and selection of robots:
(1) Leisure: Leisure is the primary policy to measure the level of robot technology ...
|
|
Features of Robotic Dresspacks:
1. High efficiency: The robot dresspack can carry out comprehensive and efficient inspection and protection operations inside the pipeline. It is able to traverse the entire pipeline system autonomously, reducing the need for human resources and increasing operating power.
2. Accuracy: Through the cooperation of sensors and control system, ...
|
|
The transmission mechanism of the robot - Denso robot
The common transmission organization methods in industrial robots can be divided into two types: linear transmission and rotary transmission organization, during which the linear transmission organization can be converted into linear motion through transmission elements such as rack and pinion, lead screw nut, etc., and can also be driven by linear drive motor, or directly driven by ...
|
|
How to deal with the flower screen of the DENSO robot teach pendant
Fault Phenomenon: A six-axis electric robot manifests itself after being visualized by a power source.
Failure Analysis:
1. The LCD screen of the teach pendant is damaged.
2. The interface loop is faulty.
3. The control I/O chip is damaged.
...
|
|
DENSO Robot ORiN2: How to Efficiently Develop a System
ORiN is a general term for the standardization center software for the development of factory IT systems based on the ORiN Association. In addition, "ORiN" is available in Version 1.0 and "ORiN2" is in Version 2.0.
According to the "ORiN2" style, ...
|
|
Features of harmonic reducer for industrial robots - Denso robots
1. Small size and light weight
2. Simple and compact structure, easy to install
3. High bearing capacity
4. Large transmission speed ratio
5. High transmission efficiency
6. High transmission accuracy
7. Smooth movement
8. High torque capacity ...
|
|
Collision detection system for industrial robots - DENSO robots
With the development of technology, robots are starting to take on more and more complex tasks. These operations sometimes require the operator to be able to intervene at any time, so in this case, the safety of human-computer interaction is a crucial issue. In order to ensure safety, the controller needs to detect the robot and the operator in real time.
|
|
Introduction of the drive unit of the DENSO robot
Robot drive concept: In order for the robot to work, the transmission equipment needs to be installed for each joint, i.e. each degree of freedom of movement.
Effect: Provide the driving force for the action of each part and joint of the robot.
Drive system: hydraulic transmission, pneumatic transmission, electric transmission...
|
|
Programming, debugging and simulation of industrial robots - DENSO robots
After learning the manual control, we have to start learning how to program the robotic arm to work actively according to the program we have written. At this stage, we need to learn the fundamental instructions and functional functions of the robot, and the content of this stage is slightly more difficult than the previous stages.
|
|
Robotic Industrial Robot Maintenance – Denso
1) Cleaning robots
Regularly clean the base and arm of the manipulator; High-pressure cleaning equipment can be used, but direct eruption to the manipulator should be prevented; If the manipulator has grease film maintenance, remove it as required. (The use of strong solvents such as acetone should be prevented, the use of plastic maintenance should be prevented, and the use of plastic should be prevented.
|
|
The contents of the DENSO robot maintenance inspection report
Robotic Arm:
Remove all previous integration lines and components
See all bot connections
Look for stress cracks or abnormalities in your arm
View/repair/replace servos, harmonics and reducers
Ensure the utility and function of the robot
Replace the robot in ...
|
|
Explanation of the direct control mode of the DENSO robot teach pendant
The direct form of the MC8 series is clarified.
In the direct form, when the motor power supply is blocked, the axis can be moved by hand (without using a multi-function trainer), and the posture variables (J, P, and T-type variables) can be learned.
...
|
|
Features of the DENSO VSith Vertical Articulated Robot vP-5243/6242
1. There are 5-axis and 6-axis models
In order to meet the market demand, Denso has developed the VP-5243 and VP6242, a 5-axis robot that can be operated in multiple directions.
2. The transportable mass is 3 kg (5 ...
|
|
Contact
working hours
