Analysis of the causes of touch deviation of the teaching pendant of industrial robots - KUKA robots

1. Whether there are people in the KUKA robot work area If the operator needs to work in the robot operation area, please hold the KCP to enter the robot operation area, and the operation of the robot is only allowed to be operated by designated personnel. Per...

The main technical parameters of the robot are freedom, resolution, working space, working speed, working load, etc. The comfort of the robot refers to the number of independent motion parameters required to determine the orientation and posture of the robot's hand in space. The degree of freedom of the robot is generally equal to ...

1. Fulfill X-Start to enter the boot application, in the boot application, click Settings, and the network connection dialog box appears. 2. If you choose not to use the IP address, please click not to use the IP address of the robot drive, if ...

　　1. The boot coordinate system is invalid The international coordinate system is based on the gun head, in this coordinate system, all the actions of the robot are completed in accordance with the gun head as the vertex to complete the movement, the XYZ direction to cut the gun direction does not change, if the machine ...

1. Enter the program in the form of the teach pendant T1, click on the lower left corner: Instruction - Logic, and you will see the commonly used logic instructions such as WAIT, WAITFOR, and OUT. 2. Select WAIT. The lower end of the interface *** presents the WAIT Time port sec .

KUKA robotic resolver-to-digital converters (RDCs) are used to collect motor orientation data. Eight resolvers can be connected on the RDC. In addition, the temperature of the motor is measured and analyzed. EDS is used to store non-volatile data in an RDC bin. ...

KUKA Robot RSI: KUKA. Robot Sensor Interface Function: The data and signals from external sensors are effectively combined with the robot control system, and then the robot movement is corrected and guided. ...

How do I set up a network connection for my Kuka robot? No matter what method you choose to set up your network connection, the first few steps are the same, so how do we do it? 1. Fulfill the X-start ...

(1) Supply voltage and power distribution function (2) The resolver (SIL2) technology is used to collect the orientation information of the eight motors for the orientation reaction (3) Obtain the real-time temperature (PTC) of the motor (4) It also has a self-temperature reaction and adds heat ...

Theoretical part about variables: 1. When a KUKA robot is programmed with KRL, a variable is a container of calculated values ("values") that are presented during the operation of the robot process in the ordinary sense. 3. Each variable is ...

Before the KUKA robot is put into operation for the first time, it is necessary to carry out a review to ensure that the equipment and equipment are intact and functional, that they can operate safely and that faults can be identified. It is necessary for us to comply with the labor protection regulations of the country and region to check, and it is also necessary to test all safety ...

In 1898, Johann Josef Keller ··· Johann Josef Keller and Jakob Knappich founded an acetylene street lamp factory in Augsburg. The abbreviation of Telegram was retained as a name, and the company changed: over the years, Kuka reinvented again and again ...

Generally speaking, industrial robots are composed of three major parts and six subsystems. The three major parts are the mechanical part, the sensing part and the control part. The six subsystems can be divided into mechanical structure system, drive system, perception system, robot-environment interaction system, human-computer interaction system and control system.

Switching the axes of the external kuka robot to the bit arrangement in an asynchronous form means switching the synchronous and asynchronous forms of the external axes Program example: $ ASYNC_AXIS='b1000' Indicates the outer axis 1, 2, 3, 4 from right to left. The example above shows that an external welding robot ...

The control method of KUKA robot teach pendant is the most used industrial robot on the market at present, and it is also the most perfect one, KUKA type robot can be widely used, the maintenance of KUKA robot teach pendant, thanks to its multiple control methods, according to the work task of ...

Commentary: After the arrival of the KUKA robot, the customer can complete the initial power-on and normal operation of the robot according to the explanation process. First, electrical connection Second, the initial power-on Third, safety equipment Fourth, the robot zero-point proofreading Fifth, IO equipment ...

1. Hot-swap button for the cable of the robot teach pendant (after pressing this button, the control cabinet can unplug the teach pendant without shutting down). 2. Connect the manager key switch; Switch the mode of movement, T1: manual low speed (as long as the manual mobile robot is capable in this form, * high speed 250mm/s), T2: manual ...

In the process of long-term use of KUKA robots, with the increase of operation time, various parts and parts will present various problems due to the influence of many factors such as friction, corrosion, vibration, impact, bumps, etc., so only by dealing with these problems and insisting on the normal operation of the robot can ...

KUKA Industrial Robots is one of the world's leading manufacturers of industrial robots. More than 10,000 industrial robots are produced every year, and so far, 150,000 have been installed worldwide. Cooka is able to provide standard industrial 6-axis robots from 3KG to 1000KG, as well as some special purpose robots ...

In the field of industrial robot operation skills, as in the human category, the sense of sight and touch are complementary forms. Career experts expect that touch sensing will soon add visual skills to mainstream robotics applications. Basically, an industrial robot tactile sensor is a touch sensor that can provide ...