Description of the role and interface of RDC in the KUKA robot arm

1. Archiving Channels: During each archiving process, a ZIP file is generated on the corresponding policy media Same name as the robot. The file name can be changed individually under the robot data. Storage Orientation: There are three different storage orientations to choose from: ...

Hydraulic drive methods are mostly used in applications that require a large output force, and the speed is lower than that of pneumatic drive under low pressure drive conditions. The output force and power of the hydraulic drive are very large, and it can form a servo mechanism, which is often used to drive the joints of large robots. The hydraulic drive system is mainly composed of hydraulic ...

The main effect of the KUKA welding robot servo motor is to convert the signal (control voltage or phase) into mechanical displacement, in the production and use of KUKA robot has the characteristics of high precision, good low frequency characteristics, high additional speed, short speed response time, etc., therefore, the KUKA robot servo electric ...

Whether it's the agile four-axis SCARA or the nimble six-axis robot, these compact and space-saving KUKA robots are the most agile and robust in the series. You can combine a wide range of four- and six-axis KUKA robots in different sizes in your machine and keep the same ...

1. Hardware Depiction Speech (HDLs) Hardware depiction language is generally used to describe electrical programming methods. These words are appropriately familiar to some roboticists, as they are used to programming FPGAs. FPGAs allow you to develop electronic hardware without the need for hands-on work.

Before the KUKA robot is put into operation for the first time, it is necessary to carry out a review to ensure that the equipment and equipment are in perfect condition, functional, safe and faulty. It is necessary to comply with the labor protection regulations of the country and region of the location, and it is also necessary to test all safety electrical ...

KUKA robot repair and replacement of the main engine of the control system: It is necessary to keep the KUKA robot control system shut down and power-off, and do a good job of relevant inspection and personal maintenance operations, in case the robot is restarted without permission, and the robot's buffer must be sure to ...

1. Auxiliary points Type: POS, E6POS, FRAME If all the weights of the auxiliary points are not given, the controller will apply the value of the previous azimuth to the short weight. The postural angle within an auxiliary point, as well as the condition and data, are in principle overlooked. The track is not approaching the auxiliary point. ...

1. Understand the ontological structure of the robot The KUKA robot used in the workshop is composed of 6 axes, each axis is driven by 1 servo motor, and each axis of the robot is operated independently to control the servo motor to rotate forward and backward after powering on, and the single-axis operation is carried out in T1 mode. Second, choose the shaft to sit ...

The KUKA AMR KMP 1500 is an omnidirectional mobile channel capable of moving autonomously and sensitively within space. Combined with the new generation of KUKA Sunrise control systems, it offers modular, widely used mobile production plans for the industry of the future. ...

1. Rapidity The time between the motor obtaining the command signal and the completion of the required working condition of the command should be short. The shorter the time of echoing the command signal, the higher the sensitivity of the electric servo system, and the better the fast response function.

Check if the robot is bumping and see if there is a mechanical load on the corresponding axes. See if the loading settings work. Whether the brake of the corresponding shaft is loosened. If the load component exceeds the additional scale, it is reduced to the constrained scale. Check the voltage input to the controller ...

1. Problems in the load setting of KUKA robots In fact, there is only one intention, a suitable load, under the appropriate driving force, the manipulator can withstand enough moment of inertia regardless of static or dynamic to ensure that the electrical control system controls the manipulator. and other machines ...

1. Whether there are people in the KUKA robot work area If the operator needs to work in the robot operation area, please hold the KCP to enter the robot operation area, and the operation of the robot is only allowed to be operated by designated personnel. Per...

KUKA Robotics only promises to use industrial robots in accordance with regulations and in a safety-conscious manner when the machine is equipped with perfect skills. Improper use can result in injury and property damage. Not all types of bots have this option. Letters about specific types of bots ...

Before the KUKA robot is put into operation for the first time, it is necessary to carry out a review to ensure that the equipment and equipment are intact and functional, that they can operate safely and that faults can be identified. It is necessary for us to comply with the labor protection regulations of the country and region to check, and it is also necessary to test all safety ...

Sparse coding can be very useful in this regard. This is an unsupervised machine learning algorithm that is implemented by creating a "sparse dictionary" to represent newly acquired data. The primary robot passes through a spectral chart (from ...

KUKA robotic resolver-to-digital converters (RDCs) are used to collect motor orientation data. Eight resolvers can be connected on the RDC. In addition, the temperature of the motor is measured and analyzed. EDS is used to store non-volatile data in an RDC bin. ...

Industrial robot is a kind of automation equipment, mechanical arm is a kind of industrial robot, industrial robots also have other forms, although the meaning of the two is different, but the content of the reference has overlapping parts. So to put it simply, there are many forms of industrial robots, and the robotic arm is just one of them.

The transfer robot is a manipulator in practical work, and the manipulator is developed because its positive role is increasingly known: First, it can partially replace manual operation; Second, it can follow the requirements of the production process, follow the certain procedures, time...