Theory and validity of KUKA robot variables

The vision system of mobile robot refers to the vision system of mobile robot, which includes two parts: obtaining pictures through sensors and processing drawings through computer processors. According to the number and characteristics of vision sensors, the mobile robot vision system of the main stream has monocular vision, binocular ...

1. Precautions when repairing KUKA robots (1) It is necessary for the owners and operators of KUKA robots to be responsible for their own safety. KUKA is not responsible for the safety of the operation of the machine. KUKA prompts the user when using KUKA ...

1. Problems in the load setting of KUKA robots In fact, there is only one purpose, suitable load, under the appropriate driving force, the manipulator can withstand enough moment of inertia regardless of static or dynamic, so as to ensure that the electrical control system controls the manipulator. and other machines ...

1. Maintain good parts Parts are an important part of CNC machine tool robots, the reason why the parts of CNC machine tool manipulators show severe wear and tear in the process of use, mainly because of the problems in people's devices, so that the orientation of parts is problematic.

First, welding robot inspection and protection 1. Wire feeding arrangement. Including whether the wire feeding force is normal, whether the wire feeding tube is damaged, and whether there is an abnormal alarm. 2. Is the airflow normal? 3. Is the torch safety protection system normal? (It is forbidden to close the welding torch safety protection ...

How to clean up common problems with infrared touch screen 1. Double-click is not very active Open the infrared screen to adjust its activity and reduce the activity. 2. Under what conditions will drift occur Because the operating principle of the infrared screen is to rely on infrared rays...

1. Program control system: apply a certain control effect to each degree of freedom, and the robot can complete the required space orbit. 2. Adaptive control system: when the external conditions change, in order to ensure the required quality or in order to improve the control with the accumulation of experience...

1. Active operation method When the KUKA robot is in active operation, it first selects the program that needs to be operated in the manual condition, and then switches the robot to self-power through the key switch, and then starts the robot operation program, so that the robot can reach the BCO safety reference point first, and then ...

The force sensor is used to detect the external force information, and the force signal is converted into the azimuth of the robot. Compliance exercises are implemented in a five-joint robot. Robot teach pendant repair advocates the use of real-time gravity and clash compensation to complete direct education without torque sensors. A method of free force manipulation is proposed ...

The KUKA robot power module KPS600/25-ESC error code and content includes: ERROR 52 The temperature in the boudoir is too high ERROR 79 COMMUNICATION FAILURE BETWEEN THE EEPROM ON THE CONTROL UNIT ERROR 65 ...

KUKA Robot RSI: KUKA. Robot Sensor Interface Function: The data and signals from external sensors are effectively combined with the robot control system, and then the robot movement is corrected and guided. ...

1. The equipment must be checked before starting, and the operation can only be started after the equipment is in good condition 2. Check and sort out the operation place to ensure that there are no flammable materials (such as oil rags, waste oil gloves, paint, perfume, etc.) and no air leakage, water leakage; 3. Ensure that the temperature of the operating room is not ...

The battery of the KUKA robot is available in two orientations, one on the door and the other under the cooling channel, and is connected to the X305 plug on the control cabinet and protected by F305 fuse. The operating system leaves the factory with the battery plug X305 unplugged from the CCU to ...

1. The structure of the conveyor belt fed at the front end of the claw of the palletizing robot, the roller conveyor belt for bag grabbing generally has a national standard, and the standard interface needs to be selected, and how to achieve it should be considered for the belt conveyor belt. 2. The selection of palletizing robot models, the robot load can be ...

1. High-precision reducer Fine reducer, in the field of mechanical transmission is the central equipment between the power source and the executive organization, usually it puts the power of high-speed operation such as electric motor and internal combustion engine through the pinion on the input shaft and meshes the large gear on the output shaft, so as to reduce the ...

At present, the use of robots in machine tools by domestic enterprises is still in its infancy, and many theoretical and practical problems have not been fully understood and handled. For example, the most common form of use is still a simple combination of machine tools and robots, each using a set of control systems. To get the most out of the machine ...

1. The reason for the overheating problem encountered in the maintenance of KUKA robot servo motor (1) The power supply voltage is too high; (2) The power supply voltage is too low, the motor is running with rated load, and the current is too hot for the winding; (3) When repairing and removing the winding, the thermal dismantling method is improperly selected, which burns the iron core; ...

1. Reasons for zero point failure: Before analyzing the cause of zero-point failure, let's first clarify a problem. For a long time, we have been calling this fault "zero point drop", which is an inaccurate depiction. The zero point parameter of the KUKA robot will not be "lost", it is remembered ...

The Robotics Talent Innovation Competition from all over the world is about to enter the next round. The final teams will use KUKA hardware to bring their ideas to life, and they will be able to present their ideas at the world's largest industrial fair, with the winner receiving a prize of 20,000 euros. In this ...

In the domestic welding robot equipment career development speed is fast, from the past single enterprise use, to the current most of the professional production welding is inseparable from welding robot equipment, the use of more and more extensive fields. The most important thing in welding operations is to ensure the quality of welding.