In the process of long-term use of KUKA robots, with the increase of operation time, various parts and parts will present various problems due to the influence of many factors such as friction, corrosion, vibration, impact, bump, etc., so only by dealing with these problems and insisting on the normal operation of the robot can we ensure the smooth progress of production. Xiaobian summarizes the top ten common problems and treatment solutions of KUKA robots.
1 The boot coordinate system is invalid
The world coordinate system is based on the gun head, in which all the actions of the robot are completed according to the gun head as the vertex, and the XYZ direction does not change the direction of the gun. If the robot moves in the world coordinate system and the gun head changes direction with it, it means that we didn't pick anything after turning it on.
Solution: Configure the current east/west coordinates → → east-west number →1
2 Expert Login
In general, when we want to edit the program after booting, we must first log in to the expert level, which will help us operate.
Solution: Configure → user group → expert → login → password KUKA → login
3 Set END
We found that there is no end to the new program, so we need to set the end.
Solution: Configure → Miscellaneous → Editor → a line of DEF
4 Set the program ** bar to the home direction
When editing the program, the first instruction should be set to the home direction, which is the standard for us to be able to find the home orientation directly after the first time, which can save the operation time of the manual mobile robot.
5 Manually enclose the output signal
When we are testing that the program may be used normally (the output signal has been turned on), sometimes we will encounter unexpected situations, such as the risk of collision in the program path, or the failure of the warm-up, the program error, etc., at this time, we have to manually close the output signal.
After the problem is solved, we can use the KCP to turn on the output signal again. (In the meantime, our output signal is 3 is low-pressure oxygen, 4 is high-pressure oxygen, and 5 is propane)
Solution: Display → input/output → digital output→ hold down the number of drive → (closed or open)
6 6D mouse failure
The system indicates that the 6D mouse still has a voltage or other prompts, the mouse fails, we can release the driver at this time, press it from the beginning and wait for the driver indication I to turn green.
7 Copy the program from your computer
Copy the program in the computer, so that after the program in the C drive is lost, we can copy and use it from the D drive or the external mobile U disk.
Solution: After the expert logs in→ press Num (Num is gray on the display at this moment, and then press it to convert back) → CTRL(2)+Esc→ computer C disk →KRC→ROBOTER→KRC→R1→Program
8 Robot Maintenance
When the robot crashes, it will start automatic maintenance, that is, the robot has a maintenance system at the A6 axis, when the tension spring is bent and deformed after the crash, the system will stop all operations after receiving the signal, we can't operate the robot at this moment, at this time we have to turn off the maintenance switch first.
Processing scheme: configure → input/output terminal→ external automatic → promise movement→ change 5 to 1025→ at this moment the robot is not subject to system maintenance constraints to move, pay attention to adjust the direction of movement of the robot, adjust the speed of movement, get out of the collision point, and adjust the value of "promise movement" to 5 after arriving at the safety all-round.
9 In the following cases, KUKA robots need to calibrate the zero point from scratch
If the robot is not completely enclosed, the zero point will be lost when the battery is depleted.
When the robot hits a hard limit, it loses the zero point. Manually remove the zero point.
The boot fails, and the zero point is lost when the time is turned off directly.
10 Program Data Parameters
The cutting speed is 0.005m/s for both straight and circular arcs, and the acceleration is 1%
The robot movement speed PTP is 20% or 10%
Linear moving speed (non-incision) 0.05m/s, acceleration 70%
Output signal: 3 is low-pressure oxygen, 4 is high-pressure oxygen, 5 is propane
|
More on that
|
KUKA robots are processed in the form of motion axes
The boundary of robot operation is to move parts and things in space through a certain organization, and the needs naturally represent the position and posture of the parts, things, and the organization itself. In order to delimit and apply the mathematical quantities that represent potentials, it is necessary to delimit the coordinate system and give the rules of representation.
...
|
|
Welding attitude adjustment and trajectory of KUKA robots
According to the use and development needs of KUKA welding robots, traditional welding methods cannot efficiently meet the production needs to a certain extent, and arc welding robot skills are increasingly valued by manufacturers. How to complete mass production efficiently and efficiently with arc welding robots is the most important thing to do.
|
|
Theory and validity of KUKA robot variables
Theoretical part about variables:
1. When a KUKA robot is programmed with KRL, a variable is a container of calculated values ("values") that are presented during the operation of the robot process in the ordinary sense.
3. Each variable is ...
|
|
An introduction to the functions of all KUKA robot software packages
1.FORCE TORQUE CONTROL / SENSOR COMMUNICATION
Choosing from a variety of KUKA signal processing software can be a small extension of your robot.
|
|
KUKA Robotics & Oktoberfest - Typical Bavaria
When you think of Oktoberfest, the smell of roasted almonds, a Ferris wheel, and a glass of beer immediately comes to mind. But what does KUKA have to do with it?
Tradition and modernity
Tomorrow at 12 noon sharp: as soon as the Tressienwi in Munich sounds "0'zapft i ...
|
|
Robot Dresspack Selection – KUKA Robots
How to choose the right robot dresspack? KUKA robot agent dresspack selection is to consider the robot model, the use of the robot, action (such as for welding, grabbing, etc.), the way of the pipeline, the number of pipelines, specifications, etc., according to the actual situation of the industrial robot to select the appropriate ...
|
|
Top 10 Faults and Solutions for KUKA Robots
In the process of long-term use of KUKA robots, with the increase of operation time, various parts and parts will present various problems due to the influence of many factors such as friction, corrosion, vibration, impact, bumps, etc., so only by dealing with these problems and insisting on the normal operation of the robot can ...
|
|
The structural composition of the KUKA welding robot
Choosing a robot for welding is not enough to have a robot, it must also be equipped with peripherals. The conventional arc welding robot switcher consists of 5 parts.
1. The robot body is generally a 6-axis shutdown driven by a servo motor.
|
|
KUKA robot backup and restore method
When a backup is required:
1. System failure;
2. Hardware collapse.
Significance of backup:
1. Save the procedures made at that time;
2. The user can prevent misoperation and deletion of the program;
3. Let the system work from scratch to prevent secondary commissioning or equipment. ...
|
|
KUKA presents the new ultra-compact KR SCARA horizontal articulated arm robot
As a branch of industrial robots, KUKA SCARA robots are capable of installation, packaging, labeling, sorting and other processing technologies with their high precision, high cost performance, high flexibility and strong adaptability, helping many manufacturing enterprises to reduce staff and increase efficiency. But with the recent years of high-tech ...
|
|
Causes of overheating of KUKA robot servo motor bearings
Causes and repair methods of overheating of KUKA robot servo motor bearings
Causes of overheating of servo motor bearings:
1. The cooperation between the inner and outer rings of the bearing is too tight;
2. There are problems with the shape and position tolerance of parts, such as machine base, end cover...
|
|
The difference between KUKA robot electrical welding and gas shielded welding
Second, welding is a common name for "carbon dioxide gas maintenance welding", and argon maintenance welding (commonly known as "argon arc welding") and other gas maintenance welding are called "gas maintenance welding".
The advantage of the second protection welding is that it is open arc welding, which is easy to achieve all-round semi-...
|
|
Preventive maintenance program for KUKA robots
back-up controller memory;
Supervise the robot at regular intervals to view the robot, wires and cables;
Look at the brakes;
See how compact the robot is;
listen to sounds, vibrations, and noise;
Depending on the specific ...
|
|
Frequently asked questions about KUKA robot motors
1. KUKA robot motor coil repair, leakage, burning, overcurrent, overvoltage, heating, hot starting, alarm, tripping, and weak work;
2. The servo motor is weak in magnetism repair work, and the low-speed (no-load) can be alarmed at high speed (operation);
3. The repair of the external shaft motor of the robot is encountered.
|
|
How to use welding robots for a long time – KUKA
First, welding robot inspection and protection
1. Wire feeding arrangement. Including whether the wire feeding force is normal, whether the wire feeding tube is damaged, and whether there is an abnormal alarm.
2. Is the airflow normal?
3. Is the torch safety protection system normal? (It is forbidden to close the welding torch safety protection ...
|
|
Practical application area of parallel robots – KUKA robots
The parallel robot has no accumulated errors and high accuracy; The driving equipment can be placed on or close to the orientation of the fixed platform, so that the moving part is light in weight, high in speed and good in dynamic response; Compact structure, high stiffness, large bearing capacity; Small working space and other features.
...
|
|
Troubleshooting KUKA robots
How can I troubleshoot KUKA robots simply?
KUKA robots work on the same principle of reciprocating work, and a good robot requires the combination of hardware and software to achieve the desired working results. For example, self-learning memory programming, etc., obstacle automatic detection bypass function, ...
|
|
KUKA Robot Alternative Package Addition Method
How to use the alternative software package for KUKA robots
Teach Pendant Device Method Login Administrator
Click Get Operational > Assistive Software
Click New Software
Click Configure
Click Path Picking
Select the corresponding folder in the USB flash drive and click Save
...
|
|
Analysis and solution of vibration fault of KUKA AC servo motor
(1) If the rotor of a KUKA motor is unbalanced, and the dynamic balance of the motor rotor is defective or deteriorates after use, an oscillation source similar to an oscillating motor may occur.
(2) Twists and turns of the hinge, the condition of the twists and turns of the hinge ...
|
|
Technical specifications of KUKA six-axis industrial robots
The six-axis industrial robot is a process test instrument used in the field of natural science related engineering and technology, and the common six-axis joint robot has six built-in servo motors, which directly drive the rotation of the six joint shafts through the reducer and synchronous pulley.
Six-axis industrial robots generally have ...
|
|
Contact
working hours
