The 120th anniversary of KUKA Robotics has collected some special congratulations

The robot control system is an important part of the robot, which is used to control the manipulator to complete specific work tasks, and its basic functions are as follows: 1. Recall function: store the order of work, the way of movement, the way of movement ...

The intent of mechanical zeroing is to make the robot's electrical zero point (encoder zero point) coincide with the mechanical zero point. Friends who know CNC machine tools know that the first reference point (zero point) for the engine bed with incremental encoder is the point. Industry...

The robot manipulator is a device that controls the robot to complete a certain action or operation task according to the instructions and sensing information, it is the heart of the robot, which determines the performance of the robot, and can be divided into two structural types: serial and parallel from the processing method of the robot control algorithm. ...

The manual movement method of industrial robots is mainly divided into four control methods: point control method, continuous track control method, force (torque) control method and intelligent control method. 1. Point Control Method (PTP) This manipulation ...

function H = KUKA_2_Tm(xyzabc) (KUKA robot) % [x,y,z,A,B,C] (mm /deg) becomes a 4x4 matrix. x = xyzabc(1); y = xyzabc(2); z = xyzabc(3); a = xyzabc(4)*pi/180; ...

Step 1: View the environment 1. Recognize the ambient temperature: the ambient temperature of the KUKA control cabinet is required to be between 5°C-45°C, the operating environment temperature of the robot body is 10°C-55°C, and the operating temperature of some new models is 0°C-55°C (see the robot skills manual for details).

The robot control system is the brain of the robot and the primary element that determines the function and function of the robot. The control system is to retract the command signal from the drive system and the implementation organization according to the input program, and control it. Control system ...

KUKA's Edition robot assists new customers in price-sensitive shopping malls in the useful automation of welding tasks. Focus on the main points, have a higher cost-to-benefit ratio, and can obtain the skill set at that time. Initially, the KR CYBERTECH nano ARC was available in two variants of the Editi ...

Industrial robot manipulators generally have the main power supply, the power supply unit of the accounting machine, the control module of the accounting machine (the main part of the accounting machine), the input and output board (I/O board), the user connection port, the teaching pendant terminal (Flexpendant) interface, the accounting machine board of each axis, the drive unit of each axis, etc.

With the proposal of Made in China 2025 and the country's strong support for high-end manufacturing, the development of China's robot industry is very agile, and industrial robots are constantly changing the customs of welding robots. Based on the ten-kilogram arc welding robot, with light weight, high stiffness and high speed functions, it is based on the ...

1. Acknowledgment before booting 1.1 There may be water stains on the site after 5S cleaning, please check whether the inside and outside of the controller and the robot body are boring to prevent the formation of a short circuit. 1.2 Determine whether the input voltage of the control cabinet is correct before powering on. R-30iA、R-30iB、R-30iB PLUS ...

1. Hot-swap button for the cable of the robot teach pendant (after pressing this button, the control cabinet can unplug the teach pendant without shutting down). 2. Connect the manager key switch; Switch the mode of movement, T1: manual low speed (as long as the manual mobile robot is capable in this form, * high speed 250mm/s), T2: manual ...

KUKA robotic resolver-to-digital converters (RDCs) are used to collect motor orientation data. Eight resolvers can be connected on the RDC. In addition, the temperature of the motor is measured and analyzed. EDS is used to store non-volatile data in an RDC bin. ...

1. According to the equipment method, it is divided into: straight equipment and horizontal installation. The company uses drones, automation, robotics and artificial intelligence to leverage these important warehouse goals to better serve its customers while improving its bottom line. ...

At present, the use of robots in machine tools by domestic enterprises is still in its infancy, and many theoretical and practical problems have not been fully understood and handled. For example, the most common form of use is still a simple combination of machine tools and robots, each using a set of control systems. To get the most out of the machine ...

From the perspective of customers in the domestic market, due to the high sensitivity and low cost of collaborative robots, small and medium-sized enterprises are the main force in the use of collaborative robots. In addition, from a practical point of view, China's aging trend is becoming more and more significant, and the cost of domestic labor continues to rise. The manufacturing industry seeks to find more ...

The KUKA robot is turned on, the power cord of the battery is not connected, and the demand is plugged in, X305! Check the wiring under the machine control cabinet 1. XS1 power interface 2. X7.1 additional shaft (7) motor connection ...

1. Demand awareness: Robot model: e.g. KR16-2 System variety: e.g. KSS8.3.38 Option package: e.g. EthernetKRL 2.6 Control cabinet model: e.g. Smallsize-2; ...

The Cooka teach pendant is an interface between the supervisor application software and the user (robot). The teaching program is connected to the control cabinet by cable. When the robot performs actions such as jog feeder, program creation, program test execution, action execution, and attitude confirmation, we make ...

1. Fulfill X-Start to enter the boot application, in the boot application, click Settings, and the network connection dialog box appears. 2. If you choose not to use the IP address, please click not to use the IP address of the robot drive, if ...