On September 17, 2019, the 15th MM. New Automation Forum in 2019 with the theme of "Interconnection, Integration and Collaborative Efficiency" was successfully held in Shanghai.
Vision sensors use drawings taken by integrated industrial camera lenses to confirm the presence, size, shape, orientation, pattern, etc. of the target object. With LED lighting, the integrated planning of cameras and lenses makes it easier for users to set up and manage the equipment. The camera uses the panoramic shutter method to capture accurate images, and the sensor has 13 basic detection functions that make it suitable for a variety of applications. The captured drawings can also be saved directly to an FTP server so that the user can handle and dissect the inspection data individually.
Primary Holdings
Integrated vision sensor for LED lighting
The panoramic shutter method minimizes picture distortion
Enhance the optical function by preventing light disturbance technology
The tight lens cap attachment allows for use in dusty or sensational environments
Various detection functions: azimuth compensation, brightness, contrast, area, margin, shape, length, viewpoint, diameter, number of targets, color recognition, color area, color target count
The quiz function can be achieved through the simulator
Set up 32 independent job groups (each job group includes 64 view items)
FTP server data storage
Provide free Vision Master: view simulator functions, parameters and job group management, view results monitoring, FTP transfer of test results, multi-language support, etc
IP67 protection (IEC standard)
|
More on that
|
Linear displacement sensor fault and treatment method - Autonics
1. If the electronic ruler is used for a long time, the seal is aging, there are many impurities, and the water mixture and oil will seriously affect the contact resistance of the brush, resulting in the continuous beating of the display. At this moment, it can be said that the electronic ruler of the linear displacement sensor is now damaged and needs to be replaced.
...
|
|
Precautions for the use of fiber optic sensors
SET button, which can be used to set the sensitivity. The basic principle of the sensor is to sense the refractive index of different media through a fiber optic probe, so as to obtain a digital signal, display it on the screen, and send the switching value by comparing the magnitude of the displayed value and the set sensitivity value. Indicator light when the sensor ...
|
|
Introduction to Autonix pressure sensor technology
1. Capacitive Capacitive pressure sensors are usually cleaned by a large number of OEM professional applications, testing the capacitance change between two surfaces, so that these sensors can sense the extreme pressure and vacuum level. In our typical sensor setup, the compact outer gram contains two metal exteriors, ...
|
|
Sensors commonly used in industrial robots
In the field of industrial automation, machines need sensors to provide the necessary information to perform the relevant operations correctly. Robots are now using a number of sensors to improve their adaptability. For example, there are many cobots that integrate torque sensors and cameras to ensure that they are equipped with torque sensors and cameras during operation.
|
|
High Temperature Pressure Sensor Accuracy Affects - Autonex
A high-temperature pressure sensor is a sensor that converts pressure into an electrical signal output, which usually consists of two parts, namely a sensitive element and a conversion element. The sensitive element refers to the part of the sensor that can directly feel or respond to the measurement; The conversion element refers to the sensitive element in the sensor ...
|
|
Factors that contribute to sensor errors – Ortonix
The first is the offset error: since the high-frequency pressure sensor maintains a stable straight offset over the entire pressure range, the change in converter diffusion and laser adjustment correction will cause the offset error.
The second is the sensitivity error: ...
|
|
Introduction to the resolution of the Autonoix encoder
Depending on the resolution supported by the encoder, encoders can be divided into marker encoders, HD encoders, and Full HD encoders. The higher the frame rate, the clearer the video.
1. What does the resolution of the encoder mean?
The resolution of the encoder refers to the encoder passing through a line or a dark line (also ...
|
|
Autonex proximity switch PRD/PRDW series
Autonex cylindrical remote proximity switch PRD/PRDW series, the selection of self-developed special IC, with the highest international noise immunity level, high echo frequency, low leakage current and residual voltage, the detection interval is 1.5-2 times of the original product, close to the switch and the cable connection part of the selection of strong ...
|
|
Precautions when using Autonex safety light curtains
Cover the safety light curtain with your hands and observe whether the indicator light conversion is normal.
During the use of the punch photoelectric protection device, the orientation of the photoelectric protection device shall not be changed at will.
In the protection zone, block the light curtain by hand, ...
|
|
Pressure Sensor Everyday Protection – Ottonix
1. Check the standard of the equipment hole: Assuming that the standard of the equipment hole is not suitable, some of the threads of the sensor will be slightly worn during the equipment process. This not only affects the sealing performance of the equipment, but also makes the pressure sensor inadequate, and may even cause safety hazards. ...
|
|
Strain characteristics of pressure sensors
When measuring the strain of an element, the strain gauge can be directly glued to the component, but if you want to measure the force, pressure, acceleration and other signals, these physical quantities must first be converted into strain, and then measured with a strain gage, and the conversion process is more than when measuring directly. The first step in completing this transformation process ...
|
|
The difference between sensitivity, resolution, and accuracy of a sensor
sensitivity
Concept: It refers to the ratio of the change of output △y to the change of input △x in the case of steady-state operation of the sensor, that is, the ratio of the dimension of output and input.
Sensor sensitivity is the slope of the output-input characteristic curve. If the output and input of the sensor ...
|
|
Autonex humidity sensor features:
Humidity sensors are divided into resistive and capacitive types, and the basic form of the product is to coat the substrate with moisture-sensitive materials to form a moisture-sensitive film. After the water vapor in the air is adsorbed on the moisture-sensitive material, the impedance and dielectric constant of the element are greatly changed, so as to make a moisture-sensitive element.
...
|
|
Causes and solutions for overheating or burning of AC contactor coils
Reasons: 1. The polar surface of the communication core is uneven or the demagnetization air gap is too large;
2. The double coil of DC operation derived from the communication contactor is overheated due to the fact that the normally closed interlocking contact is not released by welding;
3. The frequency of operation is too high;
4. Poor coil manufacturing or due to mechanical damage, absolute ...
|
|
Introduction to non-contact level sensors
Capacitive level sensors, ultrasonic level sensors, and discrete photoelectric level sensors. The common development of these three non-touch liquid level sensors is that they are not affected by the color, corrosiveness, pressure, density, etc. of the liquid, because these sensor skills cannot directly lead to the development of liquid ...
|
|
Otonic photoswitch determination
1. Measurement of action distance; When the action piece is close to the sensing surface close to the switch from the front, the distance close to the switch action is the action distance close to the switch, and the measured data should be within the parameters of the product.
2. Release distance ...
|
|
The difference between laser sensors and photoelectric sensors – Autonicx
First, the difference in working principle
Photoelectric sensors are controlled by converting changes in light intensity into changes in electrical signals. The laser sensor first emits a laser pulse by aligning it with a laser emitting diode. After being reflected, the laser light is scattered in all directions. Partially scattered light returns to ...
|
|
TZ4ST-24R Autonox Thermostat Advantages:
Dual PID auto-adjustment function
There are high-speed response modes and slow reaction modes in the PID function.
When you want to reach the desired value quickly, use the high-speed mode (PIDF mode)
When you want to minimize overshoot, use slow mode (PIDS mode)
...
|
|
Sensor fault judgment and solution - Autonics
1. Air flow meter problem
Problem characteristics: The vehicle is shaking at idle, high fuel consumption, weak at high speed, and black smoke from the exhaust pipe.
View and dissect: through the fault diagnostic instrument detection, the engine air flow meter data block is seriously exceeded, the cause of the air flow meter damage, ...
|
|
Pressure sensors can't avoid errors – Ottonix
When choosing a pressure sensor, we should consider his inductive accuracy, and what are the aspects that affect the accuracy of the pressure sensor? In fact, there are many factors that form sensor errors, and let's pay attention to four unavoidable errors, which are the initial errors of the sensor.
...
|
|
Contact
working hours
