How to carry out maintenance work on the Fujikoshi robot

The basic reasons why the Chi Fuji Yue robot teach pendant will be presented: 1. The teaching screen is black or there is no display. 2. The robot teach pendant is turned on, the horizontal screen and the vertical screen are not displayed well. 3. I can't enter the system when I turn it on. 4. Alarm when the machine is turned on or in operation. 5. Emergency stop press ...

Before using the robot teach pendant to operate the robot to move or rotate, it is generally necessary to press the work preparation button to make the work preparation light shine! After the work preparation light is on, the staff can move on to the next step. But there are times when ...

Nazhi robot from the material tray clamping, sent to the CNC machine tool processing position by the chuck active clamping, according to the established degree of processing to complete the processing of the material, after the processing is completed, the robot will be processed workpiece to the finished product tray, * after the robot will take away the waste on the chuck, and then ...

How to deal with the fact that the servo motor does not work when there is pulse output? 　　(1) Supervise the current value of the pulse output of the controller and whether the pulse output light is flashing, and admit that the command pulse has been executed and the pulse is now output normally; (2) Check the control cable from the controller to the drive, and ...

Features of PVD series piston pumps: Compact Easy to use The internal oil drain structure does not need an oil drain pipe, and the pump is simple to exhaust Get the most out of your engine Constant power control for mini excavators is standard Multiple choices Can be combined with 1 or 2 ...

1. With this flexible gripper, the robot can respond sensitively to workpieces of various shapes. Objects such as boxes, shafts, special-shaped workpieces, etc. can be grasped without having to replace other grippers! 2. This flexible gripper is driven by servo motor, which can ...

1. Whether the power supply of the robot teach pendant is connected. Check whether the power supply of the Nazhi robot teach pendant is connected to the power supply and whether there is a short circuit in the power connection. 2. Whether the brightness, contrast and display position knobs of the Nazhi robot teach pendant are adjusted in the normal position. Will the robot teach ...

1. Come over every day to check whether the position of the pallet and the position of the manipulator have been moved. There is no problem, plug in the manipulator power supply, switching power supply. 2. Turn on the computer, select program 429, start from step 0, check the moderate speed, and then execute it sequentially. Until the manipulator moves to a ...

Currently, in applications such as food, pharmaceuticals and cosmetics, industrial machinery, including automobiles, electrical and electronics· In the field of EMS, due to the sharp rise in labor wages and the emergence of labor shortages, as well as in order to further improve productivity, the automatic transformation of enterprises and factories has become a very ...

How to deal with the inaccurate positioning of the intelligent servo motor for azimuth control? 　　(1) First of all, confirm whether the current value of the pulse announced by the controller is as expected, and if not, check and correct the program: (2) Supervise whether the number of pulse instructions received by the servo driver and the controller announce the ...

Workers who perform inspections, etc., are required to observe the following rules. (A) If work is performed outside the operation area of the robot, please determine the content of the work in advance. In any case, work outside the robot's operating area. (B) In principle, the robot ...

1. Some phenomena generally presented by welding robot welding Our common robot welding generally uses carbon dioxide gas maintenance welding, and the welding defects presented in the welding process generally include welding deviation, undercut, porosity, etc., the specific analysis is as follows: (1) Present welding deviation ...

When the robot is grabbed or placed, there will be a relatively fixed or fixed position, which needs to be positioned for the first time or the offset needs to be corrected during use. Keep in mind that the posture point is not the same as the normal teaching point, and it cannot be operated using the normal teaching point method. As shown in the figure below, the 17 lines of instructions ...

A customer who makes glassware, when the robot is powered on and running, it is still normal when it first moves slightly, but when it moves with large fluctuations, it begins to oscillate violently, and the oscillation fluctuates greatly, and he feels like he is going to fall to the ground, so he quickly stops the machine and turns off the power in a panic. Dimension...

Nazhi medium-sized robot "MZ25" won the "2020 Top Ten New Product Award Manufacturing Award" 　　The Top 10 New Product Award is a selection of products that contribute to the development of product manufacturing and the strengthening of Japan's international competitiveness from among the new products that were newly developed or actually put into use in the current year.

Enter the constant setting Set Constant: Select the mechanical constant The range of action is selected as a mechanical constant Set the limit data of the corresponding axis according to the actual working condition of the robot

This article introduces the Nachi Fujikoshi robot models: MR35/50, MR20/20L, MC35/50/70. 　　1. Nachifukoshi MR35/50 robot Robot features: suitable for compact, narrow environments, a variety of device forms, 7-axis high flexibility. Robot specific introduction ...

Enter the constant setting Set the constant in the T/P key T/P key to select software equipment (teach-in form) The corresponding function code can be entered in the interface of the software equipment (teaching form), and the effect of the function code can be checked in the code list In the first one enter ...

Through the repair and maintenance of Nazhi robot equipment, the operation efficiency of the equipment can be effectively improved, the life of the equipment can be prolonged, the equipment loss can be reduced, and then the productivity can be improved, and the production cost can be reduced. 　　In order to carry out the technical maintenance of the robot, it is necessary to do the following ...

NACHI Fujikoshi--ZT Extrusion Taps Extrusion tap series No chips are generated, and stable machining is possible Extrusion taps for enhanced thread strength ZT coating It has excellent wear resistance, heat resistance, and low friction properties Sump ZT Blade (PAT. P) ...