Through the repair and maintenance of Nazhi robot equipment, the operation efficiency of the equipment can be effectively improved, the life of the equipment can be prolonged, the equipment loss can be reduced, and then the productivity can be improved, and the production cost can be reduced.
In order to carry out the technical maintenance of the robot, it is necessary to do the following operations:
(1) Leaders and employees to reach the same, overcome the idea of "repair instead of maintenance", the robot technology maintenance is listed as an important part of the human machine maintenance management, the technical maintenance is institutionalized, and the corresponding supervision mechanism is established.
The maintenance and repair functions of the robot equipment are separated, the maintenance is to maintain the normal function of the robot, and the repair is to restore the function of the machine. However, in the process of daily equipment use, it is often heavy repair and light maintenance, or even "repair instead of maintenance". However, facts have proved that 75% of the abnormal wear and tear of the machine and the fault are caused by improper operation and maintenance, so the demand arouses enough attention from the leaders and gives strong support in human, material and financial resources. All personnel related to robot equipment should reach agreement with each other, include technical maintenance operations in the area of responsibility of the maintenance personnel, and institutionalize the company, prepare the corresponding maintenance plan, formulate relevant rules and regulations, supervise whether the maintenance is carried out according to the maintenance items, content, procedures and make corresponding maintenance records, etc., and should be clear about their respective responsibilities, rights and interests, so that the rewards and punishments are clear.
(2) Strengthen the training of maintenance and protection personnel and operators to ensure that the maintenance operations can be carried out in accordance with the "regulations".
Generally speaking, the driver of the robot should be certified to work, but many drivers have poor basic quality, low level of education, have not passed the strict formal training, know little about the structure, principle, function and coordination in the operation and how to improve the efficiency of the robot equipment, and the main content of technical maintenance is to rely on the driver to complete, so it is necessary to formulate a series of training plans, to the maintenance personnel, maintenance and protection personnel, especially the driver carries out more systematic training, Ensure that all operations and technical maintenance can be carried out in accordance with the regulations.
(3) Standardize and tabulate the project content of robot technology maintenance, and do a good job in recording and archiving maintenance and protection
The maintenance specification of robot equipment refers to the provisions of the technical requirements for the maintenance of robot technology. When any robot equipment leaves the factory, the specific content and requirements of the daily maintenance and regular maintenance of the equipment have been proposed. However, in the maintenance operation, people often only do qualitative maintenance, and do not thoroughly carry out quantitative maintenance according to the content and requirements of the maintenance items. Even if it is done, there is no record of maintenance. Therefore, it is necessary for us to prepare the corresponding technical maintenance form according to the content and requirements of the maintenance items of different robot equipment in order to facilitate maintenance and make a record, and the corresponding equipment file should also be established, so as to provide a reliable basis for future maintenance and judgment of mechanical conditions and repairs.
|
More on that
|
Nazhi robot application command function
Nazhi robot application command function
|
|
Advantages of the Nachifukoshi compact superspeed robot MZ04
Clever cable arrangement for hollow wrists
The robot cable is intelligently wired by means of a hollow wrist*. By simplifying the interspersed wiring to avoid interference with surrounding devices, the reliability of the equipment has been greatly improved.
Compact, wide range of action
Lightweight and compact ...
|
|
Nazhi robot debugging steps
1. Come over every day to check whether the position of the pallet and the position of the manipulator have been moved. There is no problem, plug in the manipulator power supply, switching power supply.
2. Turn on the computer, select program 429, start from step 0, check the moderate speed, and then execute it sequentially. Until the manipulator moves to a ...
|
|
Introduction to the working principle of the Nachi Fujikoshi palletizing robot
Introduction to the working principle of the Nachi Fujikoshi palletizing robot
1. Detection and grabbing: the packed packaging bag arrives at the grabbing roller table, after the manipulator detects that there is a packaging bag (packing box) on the grabbing roller table, the manipulator arrives at the positioning point and turns to the packaging bag (packing box), and the manipulator opens and picks up the packaging bag.
|
|
What kind of preparation should the servo make when the robot is put into operation?
Put into operation ready for servo operation
1. Determine whether it is in teach-in mode, if not, it will be switched to teach-in mode. Straighten the buttons on the hand-knitted to teach; Turn the key button on the controller to teach-in mode;
2. Select the power-on button
3. Hold the micro-movement behind the hand knitter ...
|
|
Nazhi robot constant setting
Enter the constant setting
Set Constant: Select the mechanical constant
The range of action is selected as a mechanical constant
Set the limit data of the corresponding axis according to the actual working condition of the robot
|
|
How to adjust the placement and grasping orientation of the robot
How to adjust the placement of the robot
In the form of teaching, grab an iron plate, the process performs to move the iron plate to the release position, the release direction should be: the long side (418mm) and the short side (80mm) of the iron plate should be parallel to the front and left side of the fixture respectively, and leave a distance of 1-2cm ...
|
|
The main features of the Nazhi gluing robot
With the continuous development of car industrial production skills, robot gluing is more and more widely used in the field of car production. The application of bonding skills in the production of cars can not only play a role in enhancing the structure of the car, fastening and rust prevention, heat insulation and vibration absorption, and surface and interior decoration, but also can replace some parts.
|
|
Nazhi Fuji more handling, gluing robot selection strategy
This article introduces the Nachi Fujikoshi robot models: MR35/50, MR20/20L, MC35/50/70.
1. Nachifukoshi MR35/50 robot
Robot features: suitable for compact, narrow environments, a variety of device forms, 7-axis high flexibility.
Robot specific introduction ...
|
|
The basic reason why the Chi Fuji Yue robot teach pendant will be presented
The basic reasons why the Chi Fuji Yue robot teach pendant will be presented:
1. The teaching screen is black or there is no display.
2. The robot teach pendant is turned on, the horizontal screen and the vertical screen are not displayed well.
3. I can't enter the system when I turn it on.
4. Alarm when the machine is turned on or in operation.
5. Emergency stop press ...
|
|
Nachifukoshi's encryption settings
User encryption settings
When you want the program not to be modified by mistake, you need to encrypt the program on the teach pendant, and the operation method is: click once on the teach pendant: constant setting -- > control environment -- > password (password) change After confirmation, enter the following interface, and in the password ...
|
|
How to deal with the inaccurate positioning of the position control of the servo motor?
First of all, check whether the current value of the actual pulse emitted by the controller is as expected, and if not, check and correct the program:
Monitor whether the number of pulse instructions received by the servo driver and the efficiency of the controller are checked in the control line cable;
Check Servo Commands ...
|
|
Nazhi robot fault code and solution
Error Code 1052: Instability Detected in Sequential Circuit (External E-Stop)
Cause: This fault occurs when an instability or abnormality is detected in the replication signal circuit used for external emergency stop.
Solution: Please check whether only one signal is entered, or if the ...
|
|
The failure of the vigorous movement of the Chi Fuji Koshi robot
A customer who makes glassware, when the robot is powered on and running, it is still normal when it first moves slightly, but when it moves with large fluctuations, it begins to oscillate violently, and the oscillation fluctuates greatly, and he feels like he is going to fall to the ground, so he quickly stops the machine and turns off the power in a panic.
Dimension...
|
|
How to automatically load and unload the robot
Nazhi robot from the material tray clamping, sent to the CNC machine tool processing position by the chuck active clamping, according to the established degree of processing to complete the processing of the material, after the processing is completed, the robot will be processed workpiece to the finished product tray, * after the robot will take away the waste on the chuck, and then ...
|
|
How to stop the Fujikoshi robot in operation
In the process of manually operating the movement of the robot through the teach pendant, what should be done if the temporary demand aborts the robot?
Some friends may say that using the lever button can make the robot stop, this method is indeed ...
|
|
Nazhi robot work monitoring software NR:connector
NR:connector can collect and integrate various information about the robot device, and control the operation of all robots at the production site at a glance.
01Data collection
Collect all kinds of data of robots to complete the mobilization of multiple robots in groups.
|
|
Analysis and diagnosis of the black screen fault of the MC50 teaching board
1. Whether the power supply of the robot teach pendant is connected. Check whether the power supply of the Nazhi robot teach pendant is connected to the power supply and whether there is a short circuit in the power connection.
2. Whether the brightness, contrast and display position knobs of the Nazhi robot teach pendant are adjusted in the normal position. Will the robot teach ...
|
|
The Nachi Spot Welding Robot SRA series has been upgraded
In recent years, under the background of rising labor costs in China and Southeast Asian countries, the demand for automated spot welding robotization has increased year after year. When commissioning a robot in a unit, you will encounter problems with handling the cables and hoses of the unit. These pipelines will shake in response to the robot's movements, and the ...
|
|
The disc of the manipulator is damaged and malfunctioning
In the robot welding cell, the disc acts as a buffer between the device base and the robot arm. Its planning is sacrificial. If the torch, bracket or gripper is bumped, the disc absorbs most of the impact. However, when the disc is struck hard by the neck or torch holder ...
|
|
Contact
working hours
