|
Spot welding robot function and equipment requirements - Kawasaki robot
In many welding methods, because spot welding only needs to be controlled at the point position, there is no strict requirement for the moving track between the points of the welding tong, so the requirements for the robot used in spot welding are not very high, which is also one of the reasons why spot welding robots were used earlier.
...
|
|
What are the Kawasaki Robot Ontology Inspection Items?
1. Check whether the power cable, communication cable and each axis cable are damaged or aged;
2. Check whether the movement of each axis is normal;
3. Check the sealing status of each shaft and whether there is oil leakage;
4. Check out the Ka...
|
|
Industrial robot structure – Kawasaki Robot
An industrial robot is a multifunctional machine that can be operated automatically and can be reprogrammed to change. It has multiple degrees of freedom and can be used to move materials, parts, and hold things to complete a variety of different jobs.
1. Industrial robots ...
|
|
The dominant attribute of cobots - Kawasaki robots
Safety-level monitoring station - this form of operation requires the robot system to monitor the work area and stop all actions when someone enters the collaborative work area. This monitoring may touch the use of lasers to monitor whether someone has crossed the edge of the work area, switch to monitor whether the door is open in a closed space, ...
|
|
Kawasaki Robotics was unveiled at CeMAT ASIA
Kawasaki Robotics debuted at MAT ASIA 2020 Asia Logistics Exhibition on November 3, with the theme of "Smart Logistics" as a series of themes.
|
|
Kawasaki robot teaching box maintenance failure and solution
(1) Kawasaki Kawasaki Teach Pendant Poor or Partially Ineffective Contact (Replacement Contact Panel)
(2) Kawasaki teach pendant no display (repair or replace internal motherboard or LCD screen)
(3) Kawasaki teach pendant display does not ...
|
|
The structure and performance of the Kawasaki welding robot
The welding robots produced in countries around the world are basically joint robots, and most of them have 6 axes. Among them, the 1, 2, and 3 axes can send the end things to different spatial positions, while the 4, 5, and 6 axes can solve the different requirements of the east and west postures. There are two main types of mechanical structures of the welding robot body.
|
|
Commissioning of industrial robots – Kawasaki Robotics
The installation of the robot is carried out on the site, and the real production environment will be affected by the space utilization rate, etc., resulting in many postures of the robot being bound by constraints, and this can easily lead to the industrial robot in the practical work, sensation, displacement and other phenomena, and after all...
|
|
Industrial Robot Visual Positioning Technology - Kawasaki Robot
1. Visual positioning skills of industrial robots
Machine appearance is a new discipline aimed at developing robotics skills. After eternal planning and beauty, more industries and fields are used. The basic principle is to use cameras and computers to make people's eyes higher than their hearts. While...
|
|
The working principle of AGV driving the steering wheel - Kawasaki Robot
The AGV drive steering wheel usually consists of two parts, one part is the steering wheel and the other part is the steering wheel. The steering wheel is located in the front of the AGV and is mainly used to change the direction of the AGV.
1. The operating principle of AGV driving the steering wheel
AGV drive ...
|
|
Applications and advantages of industrial robotic arms – Kawasaki
An industrial robotic arm is a mechatronic device that functions as an anthropomorphic arm, wrist, and hand. mechatronic devices for anthropomorphic arms, wrists, and hand functions; It can move any object or thing according to the time-varying requirements of spatial posture (orientation and posture), and then complete the operation of a certain industrial production.
|
|
Advantages and disadvantages of parallel connection compared to tandem robots - Kawasaki
From the perspective of histology, robots can be divided into two categories: tandem robots and parallel robots. The tandem robot takes the open-loop organization as the prototype of the robot organization; A parallel robot is a robot that has one or several closed-loop joints whose coordinates are related to each other.
...
|
|
Kawasaki Robotics solves the pain points of the coal mining machinery industry
In the process of cooperation between Kawasaki Robotics and Shandong Mining Machinery Group, Kawasaki found that problems such as complex equipment structure, cumbersome welding process, and multiple varieties and small batches are severe challenges faced in the welding process of coal mine machinery. And at the moment, if you still rely on traditional robots...
|
|
The robot's requirements for the joint drive motor - Kawasaki Robot
1. Rapidity
The time from obtaining the command signal to the operation condition required by the motor to complete the command should be short. The shorter the time to respond to the command signal, the higher the sensitivity of the electric servo system, and the better the fast response performance.
|
|
Kawasaki develops the four-legged walking robot BEX
In Western movies, we can see cowboys galloping on horseback and occasionally competing on the back of cows. With the progress of skills, the denim's means of transportation are gradually replaced by various mechanical products. But now, perhaps, there is another way – to combine the animal and the machine into one.
...
|
|
Kawasaki's first Chongqing-made six-axis robot officially rolled off the production line
On September 27, the first six-axis robot made by Kawasaki (Chongqing) Robot Engineering Co., Ltd. officially rolled off the production line. This robot is a robot that continuously optimizes its functions according to Kawasaki's best skills in the field of spot welding. This also marks the official production of Kawasaki Robotics Chongqing production base. ...
|
|
Process parameters of the Kawasaki welding robot
1. Robot weight
Active welding robots vary in size and weight.
2. Repeat positioning accuracy:
Reflects the welding accuracy that the active welding robot insists on during repetitive actions. The active welding robot that has passed the quality inspection can be used without errors.
|
|
Kawasaki Industrial Robot composition
Industrial robots are mainly composed of three fundamental parts: the main body, the drive system and the control system.
The main body - that is, the machine base and the executive organization, including the arms, wrists and hands, and some robots also have walking tissues. Most industrial robots have 3-6 degrees of freedom of movement, during which the wrist is generally ...
|
|
Kawasaki robot repair steps
1. When patching, determine where the problem is, part of the robot problem is drive damage and machine parts problems, ask the customer who needs to repair to present the root cause of the problem and understand the problem.
2. The situation presented by the problem, e.g. ...
|
|
The internal structure of the robot quick-change tooling
1. Quick change tooling body: The quick change tooling body is the main part of the robot quick change tooling. It is the most basic and primary part of the whole design. It is available in a wide variety of shapes and materials and can be adapted to the needs of the industry.
...
|
Contact
working hours
