Kawasaki robot repair steps

The contact tip is a kind of item with high replacement frequency of welding wearing parts, the contact tip is a role in the fixed position of the welding wire when it passes, due to the excessive current that passes through the arc at the end of the welding, it is easy to melt the outlet of the contact tip, causing the welding wire and the contact tip to be fused together, can not ...

1. Dripping To prevent dripping, ensure that the spraying angle is correct, the nozzle is clean, the spraying pressure is appropriate, and the correct nozzle size is used. If a drip occurs, it should be removed immediately and the fault corrected in the subsequent spraying process. 2. Smudge To prevent dizziness ...

The world's first industrial robot was born in United States in 1962. George Charles Devol, Jr., an engineer from United States, proposed "robots that can flexibly respond to automation through teaching and playback", and his ideas are similar to those of companies known as the "father of robots".

1. Check whether the power cable, communication cable and each axis cable are damaged or aged; 2. Check whether the movement of each axis is normal; 3. Check the sealing status of each shaft and whether there is oil leakage; 4. Check out the Ka...

The spraying process of the spraying robot 1. The paint spraying process is the most widely used process of spraying robots. The paint spraying process can be divided into dry and wet spraying. Dry spraying requires special working conditions, while wet spraying can be completed under normal working conditions. Usually...

Industrial robots are mainly composed of three fundamental parts: the main body, the drive system and the control system. The main body - that is, the machine base and the executive organization, including the arms, wrists and hands, and some robots also have walking tissues. Most industrial robots have 3-6 degrees of freedom of movement, during which the wrist is generally ...

Truss robots are also called Cartesian coordinate robots and gantry robots. In industrial applications, it can complete automatic control, reprogrammable, multi-functional, multi-degree-of-freedom, multi-purpose manipulators with spatial right-angle connection between degrees of freedom of movement. It can carry objects, manipulate ...

When spraying, whether it is powder spraying or painting, it is necessary to atomize it to ensure uniformity. The composition of the paint is all chemical substances, and its paint mist and other volatile gases are flammable, and the spraying work site is like a gasoline station, which is flammable and explosive. And the robot is powered by electricity...

First, the working hours are long It can be operated continuously 24 hours a day, and it is necessary for workers to have a break period. Second, it can replace manual dangerous operations In some stamping areas, many processes are very dangerous ...

What are the aspects to consider when choosing a Kawasaki robot: velocity The speed is different for different users. It depends on the moment when the job requirement is completed. The spec sheet usually just gives the highest speed, and the robot can provide ...

1. Dripping To prevent dripping, make sure that the spraying point is correct, the nozzle is clean, the spraying pressure is appropriate, and the correct nozzle size is used. If a drip occurs, it should be removed immediately and the fault corrected in the subsequent spraying process. 2. Smudge To prevent dizziness ...

1. Use in palletizing In terms of palletizing in various factories, robots with high automation are widely used, and manual palletizing operations are intensive, labor-intensive, and labor-intensive, and workers not only need to accept huge pressure, but also have low operation efficiency. The transfer robot can be based on the characteristics of the transferred object.

1. Visual positioning skills of industrial robots Machine appearance is a new discipline aimed at developing robotics skills. After eternal planning and beauty, more industries and fields are used. The basic principle is to use cameras and computers to make people's eyes higher than their hearts. While...

How to choose smooth grease for linear guides You know, smooth on the linear guide life is a great influence, here to say, the selection of smooth finger criteria it has the base of oil, as well as additives, if the type of brand is different, then their smooth grease function is different...

1. Overload Overload is a common problem of robots, generally because of faults in the circuit, resulting in the load exceeding the load set by the machine at the factory, triggering the maintenance mechanism and causing the machine to be unable to use. 2. There are abnormalities at work ...

The transfer robot is a manipulator in actual operation, and the development of manipulator is because its positive role is increasingly known: First, it can partially replace manual operation; Second, it can follow certain procedures and time in accordance with the requirements of the production process.

1. Zeroing and debugging each axis of the industrial robot After the robot leaves the factory, the axes of the industrial robot may not be zero, if such a robot is directly put into production, the center of gravity of each axis may not be accurately fixed on the support point, and the production process may lead to ...

The robot welding is argon-rich mixed gas maintenance welding, and the welding shortcomings presented in the welding process generally include welding deviation, undercut, porosity, etc., the specific analysis is as follows: (1) The welding deviation may be the incorrect orientation of the welding.

(1) Subject The main machine is the base and the implementation mechanism, including the big arm, the small arm, the wrist and the hand, which is a multi-degree-of-freedom mechanical system. Some robots have other walking mechanisms. Industrial robots have 6 degrees of freedom or more, and the wrist has 1-3 degrees of freedom of movement. ...

The use of mechanical automation skills in welding production lines has gone through three stages: imitation, self-research and development, and steady development. The welding machine in the welding production industry will be widely used, and the degree of mechanization and automation will be improved by about 15% in the welding production process, and the degree of welding automation will reach 40 ...