Specifications for the use of DENSO robots

Create Date: 2024-8-30 12:03:23|Source: Denso/DENSO

When using DENSO robots, we should pay attention to the specifications of use

Specifications for the use of DENSO robots

Wear protective gear

Personnel who carry out the work should wear safety helmets, safety shoes, and goggles.

When using grease, wear protective gear such as gloves and goggles to prevent the grease from coming into contact with your skin or eyes.

Precautions for transportation and equipment operation

In addition to the lightweight and small robots, which allow one person to work, at least two people are required to transport the robot and work with the equipment. Also, try to avoid manual work and use a crane or lift with excellent performance.

Secure the cable to the specified suspension bolt (eye screw). If the suspension bolts are not secured during lifting, it may cause equipment breakage or injury to personnel.

Do not go under the robot while working.

Draw up "operating rules" and ensure that operators abide by them

If you need to conduct work such as teaching and maintenance inspections in the confined space of the robot, please refer to the following items to draw up "work rules" and supervise the implementation by the operators.

The robot operation process required for the operation such as the starting method and the use of the switch

The speed of the robot when performing tasks such as teaching

How to contact multiple people when they are working on the job

When there is an abnormality, the operator should adopt the corresponding measures

After the emergency stop equipment is started and the robot operation is stopped, the method to be adopted to restart the robot (abnormal situation release recognition, safety recognition, etc.).

In addition to the above, in order to avoid the risk caused by sudden operation or misoperation of the robot, the following measures need to be adopted.

Display on the control panel

Ensure the safety of workers in confined spaces

Ensuring the correct working orientation and posture The position and posture of the robot can be recognized all the time and can be avoided immediately when there is an abnormality

Implement anti-disturbance measures

Contact information for the operator of the relevant equipment

Abnormal varieties and their identification

According to the variety, equipment location, and operation content of the robot, the corresponding "operation rules" are formulated.

The above are the specifications of DENSO robots when they are in use

More on that

	Welding Robot Welding Process Parameter Adjustment - Denso Robot 1. Number of joints. The number of joints can also be called degrees of freedom, which is an important goal for the flexibility of the robot. Generally speaking, the robot working space can reach three degrees of freedom, but welding not only needs to reach a certain direction in the space, but also needs to ensure the spatial posture of the welding gun. ...
	Structure of the Denso robot reducer 1 Common gear reducer Common gear reducers are very common in the customer's mechanical drive process in the factory. It uses two gears of two similar shaft devices to accomplish the mission of transmitting power and deceleration. This type of reducer has a lever and cam as well as some ball bearings. ...
	Introduction to Offline Programming - DENSO Robot The OLP-Of-Line-Programming system is to establish a geometric model of the robot and its environment on the computer, depict the mission of the robot in the robot programming language, and then simulate the three-dimensional graphic animation of the programming results, and debug the robot program offline.
	Robots are classified from application environment - DENSO robots China's roboticists start from the use of the environment and divide robots into two categories, namely industrial robots and special robots. This is consistent with the international classification. Industrial robots refer to multi-joint manipulators or multi-degree-of-freedom robots for industrial applications. Special robots are in addition to...
	Precautions for disassembling DC motors - Denso robots 1. For the motor equipped with rolling bearings, the bearing cover should be removed first, and then the fastening screws of the end cover should be loosened, and the symbol should be made at the seam between the end cover and the base shell, and the screws of the removed fastening end cover should be screwed into the two specially arranged screw holes on the motor end cover, and the end cover should be ejected. ...
	Functional characteristics of industrial robots - Denso The functional characteristics of industrial robots affect the operating power and reliability of robots, and the following functional policies should be considered in the planning and selection of robots: (1) Leisure: Leisure is the primary policy to measure the level of robot technology ...
	Robotic Industrial Robot Maintenance – Denso 1) Cleaning robots Regularly clean the base and arm of the manipulator; High-pressure cleaning equipment can be used, but direct eruption to the manipulator should be prevented; If the manipulator has grease film maintenance, remove it as required. (The use of strong solvents such as acetone should be prevented, the use of plastic maintenance should be prevented, and the use of plastic should be prevented.
	Introduction to Robot Servo System - DENSO Robot In general, when we talk about robot servo system, we refer to a precision servo system used for multi-axis motion control. A multi-axis motion control system is composed of a high-level motion controller and a low-level servo drive, and the motion controller is responsible for the decoding of motion control commands, the control of various positions, etc.
	The difference between "four" and "six" in industrial robots Among the four-axis SCARA robots and six-axis articulated robots, the four-axis robots are specially planned for high-speed pick-and-place operations, while the six-axis robots provide higher flexibility in production movements. Four-axis robot The first two joints of the SCARA robot are capable of left ...
	Common types of robotic arms and their functions - Denso robots Robotic arm refers to a high-precision, multiple-input, multiple-output, highly nonlinear, and strongly coupled messy system. Due to its common operational flexibility, it has been widely used in industrial installations, safety and explosion protection, etc. So what are our common robotic arms? Classified by different occupations as ...
	The DENSO robot has a built-in vision connection method Hardware articulation method If it is a USB camera (IDS), it is connected to the USB port of the robot controller. In the case of GigE cameras (Basler) and network cameras (Canon), they are connected to the LAN port of the robot controller through the HUB during punctuality, and directly connected to the machine during execution.
	Weld quality grade classification The weld should be selected according to the importance of the structure, the load characteristics, the form of the weld, the working environment and the stress condition, etc., according to the following principles: 1. In the components that need to be exhausted accounting, all butt welds should be welded through, and their quality grades are: ...
	The difference between a new robot and an old robot A new type of welding robot The new robot has a brand new packaging, it's clean, but what else? When you buy a new welding robot, you get a guarantee that the machine will work within the standard range for a certain period of time. You also got a past without any problems ...
	Industrial robots form a system - Denso robots 1. The main body The main machine is the machine base and the implementation organization, including the big arm, the small arm, the wrist and the hand, which constitutes a multi-degree of freedom mechanical system. Some robots also have walking tissues. Industrial robots have 6 degrees of freedom or more, and wrists have 1-3 degrees of freedom of movement. ...
	The process of creating a DENSO robot program STEP 1: START WINCAPS III LAUNCH WINCAPS III. For details, please refer to "Chapter 3 Initiation and Closure (P.11)". STEP2: Create a project Create a project based on the robot used (necessary data). For more information, please refer to ...
	How to start robot automation correctly – DENSO robots For small and medium-sized enterprises and large manufacturers, robot automation can help them improve power and work quality, reduce operating costs and improve sensitivity as long as they have the right equipment. Before deploying initiatives, companies must draw up a complete strategic plan. They need to understand the proactive ...
	DENSO has released a new entry-level large-scale parts assembly robot At ATX West, the 2020 World Automation Skills Expo in Anaheim, United States, DENSO Investment Co., Ltd., headquartered in Japan, showcased a new series of high-performance industrial robots for entry-level manufacturers capable of manufacturing large parts. ...
	Wire diameter selection for DENSO robots Select the right wire diameter for welding The main consideration in selecting the diameter of the wire is the thickness of the material to be welded. If the selected wire is too small for the data, the welding process is underpowered, and time and production are wasted.
	Industrial robots often calibrate the cause – Denso To calibrate a robot, we first need to understand the factors that may cause the robot to go wrong. There are many factors that form robots to produce errors, and there are two main categories, one is kinematics, and there are processing errors, mechanical service/installation errors, ...
	The main input and output interface of the robot - the DENSO robot (1) I/O port I/O input inlet, including welding start, stop, reset, welding mode selection and welding car and torch adjustment and other 16 switch inputs, plus pendulum center photoelectric sensor switch input, sharing 17 I/O input points I/O outputs, three stepper ...