Introduction: The Fisher/Fisher Vee-Ball™ V300 Flange Control Valve features a hemispherical valve with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve, and the shear action between the V-notch ball core and the spherical seal improves the valve's operating flow performance and better avoids clogging. The unobstructed, straight-through flow channel design increases the flow of gases, vapors, liquids, and fibrous slurries. Even in the toughest applications, the rugged HD metal seal construction provides a long service life.
Features:
The flanged body design minimizes exposed pipe flange bolting, reduces alignment and installation time, facilitates safety valve installation, and improves pipeline tightness.
The rugged HD ball valve seal construction provides long service life even in the toughest applications.
The precise profile of the V-Ball Valve provides a corrected equal percentage flow characteristic.
Materials can be used in acidic liquid and gas applications. These structures comply with NACE MR0175-2002, MR0175-2003, MR0103, and MR0175/ISO 15156.
The inspection and replacement of the ball valve seal is carried out at the inlet of the valve body, without the need to disassemble the actuator or disassemble the valve.
The optional ENVIRO-SEAL™ packing system is designed with a very smooth shaft surface and dynamically loaded packing for excellent sealing performance.
Product parameters
Certifications: Compliant with SIL, ATEX, CUTR, PED, CRN, Fugitive Emissions, NACE
Critical conditions: noise suppression, cavitation, dirty, corrosive, low flow, general condition
Flow characteristics: Equal percentage
Materials: carbon steel, stainless steel, double-sided, alloy
Operating temperature: quasi-temperature
Pressure rating: PN, ASME
Process connector type: flanged type
Cut-off class: Class III (FCI 70-2), Class IV (FCI 70-2), Class VI (FCI 70-2)
Valve sizes: NPS 1, NPS 1-1/2, NPS 2, NPS 3, NPS 4, NPS 6, NPS 8, NPS 10, NPS 12, NPS 16, NPS 20
Valve size standard: NPS, DN
This article introduces the Fisher/Fisher Vee-Ball™ V300 flange control valve products, if you are interested in Fisher/Fisher control valves, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy. Safety relay products, if you are rightFisher/Fisher control valvesIf you are interested, please also contact our customer service, we look forward to your call, and hope that our technology and service can bring you a better experience.
|
More on that
|
Fisher/Fisher TBX-T desuperheater
The Fisher TBX-T desuperheater can be used in a variety of applications to effectively reduce the temperature of superheated steam to the ideal set point. The TBX-T can be installed in steam lines with diameters DN 200 to DN 1200 (NPS 8 to 48) and can maintain steam temperatures at 6°C (10° ...
|
|
Fisher/Fisher easy-e EW Series Control Valves
The Fisher easy-e EW series is designed for a wide range of applications commonly found in the oil and gas production industry. These valves meet the requirements of a wide range of applications, such as power stations where oversized pipes limit fluid flow rates. These valves are also suitable for applications where noise cancellation is required, e.g. in ...
|
|
Fisher/Fisher DFA adjustable nozzle type desuperheater
The Fisher DFA (Flexible Desuperheater) includes a water control element and a stand-alone desuperheater (with adjustable nozzles and mechanical atomization) for medium to high flow variation applications. The DFA is mounted to the NPS 8 or larger pipe end via a flange connection. specification
Certified PED, C...
|
|
Fisher/Fisher Cavitrol™ III trims
Fisher Cavitrol III trims are designed for clean, cavitation applications with a maximum pressure drop of 207 bar (3000 psi). The cage in the trim includes a large number of specially shaped, radially arranged holes to reduce turbulence and maintain the overall pressure drop, thereby controlling or eliminating cavitation.
|
|
Fisher/Fisher Model 749B Conversion Manifold Assembly Air supply: 15 psig
Introduction: The Fisher/Fisher Model 749B Changeover Manifold Assembly Regulator automatically converts from a supply cylinder to a spare cylinder (when the gas is exhausted). The Fisher Model 749B Regulator is a high-flow conversion manifold for commercial and industrial applications. This assembly is mainly used for the use of HSRL ...
|
|
Fisher/Fisher position transmitters 4210, 4211, 4212
The Fisher®4200 Series Electronic Position Transmitter is a versatile, accurate instrument that combines field-proven electronic and mechanical technology to sense the position of the device and send a standard (4 to 20 mA) output signal to the indicating device. The available configurations of the 4200 are: transmitter only ...
|
|
Fisher/Fisher Model 1805P Pilot-Acting Pressure Relief Valve Spring Adjustable
Introduction: The Model 1805P-6358 Pressure Relief Valve is an accurate, low-cost commander-acting pressure relief valve consisting of a Model 1805P main valve and a Model 6358 commander. It is available in an NPS 2 size version with three ranges of 10 to 100 psig / 0.69 to 6.9 bar.
|
|
Fisher/Fisher easy-e™ cryogenic control valves meet small flow rates
Introduction: The Fisher/Fisher easy-e cryogenic valve is a single-port ball valve with stainless steel construction and welded extension bonnet. These cryogenic valves are designed to provide throttling or on-off control of liquids and gases at temperatures as low as -198°C (-325°F).
|
|
Fisher/Fisher DVI Vapor Regulated Desuperheater
The Fisher DVI desuperheater is injected with a water jet at the venturi outlet section to ensure thorough mixing as well as rapid atomization. DVI desuperheaters can be easily installed between flanges in steam pipes from DN25 to DN600 (1 to 24 inches). No moving parts, water fill mode for fast, ...
|
|
Fisher/Fisher S402Y Regulator Body size NPS3/4 1NPT
Description: The Fisher/Fisher Model S402Y Pressure Regulator Direct Acting Reed Regulator provides economical pressure reduction control in corrosive environments in a variety of residential and small commercial applications. Typically, the Model S402Y is used to reduce the pressure of gas distribution to 4.5 in w.c. to 2.5 ps ...
|
|
Fisher/Fisher Model R622 Pressure Reducing Regulator
The Fisher Model R622 direct-acting, spring-loaded regulator provides economical pressure reduction control in a variety of residential, commercial, and industrial applications. These regulators can be used for natural gas, manufactured gas, or LPG with the same inlet and outlet pressure capabilities.
peculiarity
Compact...
|
|
Fisher 3610JP Pneumatic Double Acting Valve Positioner
The Fisher 3610JP pneumatic positioner can be used with a double-acting rotary actuator to locate control valves used in throttling applications. These positioners are rugged and provide valve positioning proportional to the pneumatic input signal or DC current input signal and as a whole ...
|
|
Fisher/Fisher CSB400 Pressure Regulator Ductile iron
Description: Fisher/Fisher's CSB400 series of direct-acting reed regulators can meet a wide range of pressure reduction applications in commercial and light industrial facilities. The flexibility is due to the fact that the regulator offers a wide range of body sizes and end connections, outlet pressures, and ...
|
|
Fisher/Fisher 1052 Rotary Actuator
The Fisher 1052 spring-return diaphragm rotary actuator operates a splined shaft rotary valve for on/off or throttling applications. The easy-to-install design offers a wide range of options: limit switches, position indicator switches, positioners, and manual overrides.
specification
Actuation method Spring back ...
|
|
Fisher/Fisher POSI-SEAL A11 rotary control butterfly valve
A control valve is a valve that is fully or partially opened or closed in a pipeline according to the process signal to control the flow, pressure, temperature and liquid level. Information on Fisher®, Baumann™ and POSI-SEAL™ brand control valves can be found via the links on this page.
...
|
|
Fisher/Fisher Model ACE95 Steam Storage Tank Seal Valve
The Model ACE95 is a pilot-acting steam storage tank seal valve for precise pressure control in low-pressure sealing systems. Constructed of stainless steel, the unit is actuated by a large diaphragm actuator that accurately controls the seal pressure with a single adjustment bolt.
peculiarity
Fully balanced and non-motorized ...
|
|
Fisher/Fisher Vee-Ball™ V150S Flanged Control Valve Shut-off Level 1
Introduction: The Fisher/Fisher Vee-Ball™ V150S flanged control valve has a hemispherical construction and is equipped with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve.
|
|
Fisher/Fisher Y602 Series Ventilation Components
Y602 Series ventilation assemblies help prevent vent obstruction and ensure proper air or gas flow in regulator spring housings, remote ventilation ducts, actuator membrane housings, and other applications. These ventilation components are available in angled or straight-through versions. In general, angular ventilation components protect the side ...
|
|
Fisher/Fisher dirty service trims
Fisher dirt service trims are designed for dirt and cavitation applications. Cavitation is eliminated with a range of flow limits and extensions, allowing particles up to 19mm (3/4in) in diameter to pass through without clogging. Each trim stage has a sequentially increasing flow ...
|
|
Fisher/Fisher EZ-OVT trim
The Fisher EZ-OVT trim is a dual-seated trim designed for long-term, tight shut-off in on/off applications where fluids contain particulates, such as catalyst powders. These valves are suitable for controlling and cleaning hydrogen used in the refining process of UOP Continuous Catalyst Regeneration (CCR).
|
|
Contact
working hours
