Fisher/Fisher Model ACE95 Steam Storage Tank Seal Valve

Introduction: Fisher/Fisher NotchFlo™ DST control valves are designed for use in dirty, cavitation applications. The trims in this valve utilize a range of flow restrictions and extensions to eliminate cavitation, allowing particles up to 12.7 mm (1/2 in) in diameter to pass through without clogging. ...

The Model 92C Self-Operated Valve is a cost-effective pressure reducer for use in steam applications. The valve can be equipped with a Model 6392 pilot or without a pilot for use as a pressure-loaded regulator. The commander-acting version uses the inlet pressure as the working medium; No need for a separate air ...

Introduction: The Fisher/Fisher 8532 High Performance Butterfly Valve provides excellent performance under extreme pressure and temperature conditions. The 8532 valve maintains tight shut-off and can be used in fire-tested buildings and can also be specifically designed for cryogenic applications. The valve is flangeless (to-clamp) ...

Versatility of application - 5 models and 11 sizes of actuators are available for a wide range of applications. A wide range of spring rates, stroke limiters, and manual operators are available for use in virtually any control valve application. There is an excellent linear relationship between the loading pressure and the stroke.

Introduction: The Fisher/Fisher V500 Eccentric Plug Valve combines the robustness of a ball valve with the high efficiency of a rotary valve. It is designed to control corrosive, coking, and other difficult liquids, providing throttling or on/off operation. 　　Features: Self-centering seat rings ...

Introduction: The Fisher/Fisher D4 Control Valve is a compact, rugged straight-through valve designed primarily for high-pressure throttling applications, with pneumatic or electric control. This valve is best suited for pressure and flow control applications in the oil and gas production industry. These valves are particularly suitable for ...

The Model 119 switching valve is used for on/off or throttling control of non-corrosive or slightly corrosive gases. They are designed to meet the requirements of low-pressure gas applications in a variety of industries. The 119EZ and 119EZS are used as fuel gas valves for oil and gas natural draft burners. The product comes with a built-in speed control ...

The EZH (Spring Closed) and EZHSO (Spring Open) series regulators are precision-piloted, pressure-balanced soft-seat regulators. These regulators are used for high-pressure natural gas transmission/city gate stations, high-flow distribution systems, and power plant gas supply. They have the ability to run smoothly and ...

The Fisher 657 and 667 actuators are designed to ensure stable on/off or throttling operation of the control valve. These spring-balanced diaphragm actuators determine the position of the valve spool in response to a changing pneumatic output signal from the controller or valve positioner. 657 Actuators ...

The Fisher Model H120 direct-acting pressure relief valve comes with a pre-installed fixed spring retaining ring. The inlet pressure taker is mounted directly to the spring load lift assembly with a nitrile rubber (NBR) disc. When the inlet pressure exceeds the spring set value, the lifting assembly and disc assembly will be pushed ...

Complete Fisher pipe silencers provide superior noise reduction performance for applications where valves generate a lot of noise. Once installed, the total system pressure drop is split between the valve and the silencer. This allows the valve to operate at a lower pressure drop ratio, reducing the noise generated during the flow through the control valve.

1 NPT end connection CL900 (2250 psig) pressure rating FloPro field selectable flow rates for 1/4, 3/8, and 1/2" port sizes Rugged alloy 6 trim for use in corrosive applications Full 2250 psig pressure drop capability Suitable for NACE ...

The Series 167D Switching Valve is used to provide reduced, stable vaporized liquid pressure to pilot-acting controllers and other pneumatic instruments. Models 167D and 167DS valves are two-way switching valves. Models 167DA and 167DAS are three-way switching valves. peculiarity Compact Easy*** adjustment ...

Introduction: The Fisher/Fisher easy-e cryogenic valve is a single-port ball valve with stainless steel construction and welded extension bonnet. These cryogenic valves are designed to provide throttling or on-off control of liquids and gases at temperatures as low as -198°C (-325°F).

Introduction: The Fisher/Fisher Vee-Ball™ V300 Flange Control Valve features a hemispherical valve with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve.

The Fisher D3 Control Valve is a compact, rugged valve for on/off or throttle control with FloPro technology and the choice of pneumatic or electric control. This valve is best used as a tipping valve for gas separators and scrubbers. At the same time ...

Introduction: Fisher/Fisher YD and YS 3-way cage pilot valves are designed for throttling or on/off service and are available in balanced and unbalanced configurations. YD valves are used in general merging and diverting applications. YS valves are used in general merging applications. Fisher YD and YS valves are used in a wide range of applications, including oil ...

Electric-pneumatic positioners Electric-pneumatic positioners are conventional pneumatic positioners with an additional integrated electric-pneumatic converter. The converter receives the DC analog input signal from the control system and converts it into the corresponding pneumatic signal, which is then sent to the conventional positioner. Almost every ...

Product Description: Type 1051 and Type 1052 diaphragm rotary actuators are pneumatic spring-return actuators suitable for rotary control valves and other equipment. The Type 1051 actuator can be used for switching or throttling operations when equipped with a valve positioner. Type 1052 Actuator with or without Valve ...

The Fisher Yarway AT-18/28 Heavy Duty A.T.-Temp Desuperheater was developed specifically for medium/high pressure steam applications. Its prefabricated structure can easily meet a variety of boiler specifications and material specifications. The unit can also be used as an injector for liquid injection gases, typically with high-grade alloys such as stainless steel. ...