Fisher/Fisher Model R622 Pressure Reducing Regulator

The Fisher Whisper Trim I cage provides control of aerodynamic noise, especially in water, gas, or steam flow applications. The Whisper Trim I valve cage utilizes multiple specially shaped, dimensional, and spaced orifice to remove the noise generated by the water, gas, or steam flowing through the control valve.

KTM Mecafrance Series RA three-piece ball valves with oscillating centre section designed for reliable use with easy seat and gasket replacement. The RA series is available with full and reduced boreholes, cast in carbon or stainless steel, and has an ISO top flange for easy automation. Feature: Swing center part ...

The Fisher easy-e ET is the ideal solution for all high process temperature general applications, with a balanced plug design and cage guided trims. Available with straight-through or angled bodies, these valves provide up to Class V or Level VI shut-off specification Certified to SIL, fugitive emissions, N...

It can produce up to 5.3 kN (1,200 lbf) of thrust, depending on the construction. Depending on the size, travels up to 105 mm (4 1/8 inches) are available. The actuator base has four screw holes that allow for the installation of brackets or plates. With a wide selection of springs, it is suitable for almost any ...

The Fisher®V260 is an 8- to 16-inch flanged full-bore ball valve that can be matched to the CL300 or CL600 lb class for high flow process applications. Order the V260 with the option of a noise reduction cage or an anti-cavitation cage to reduce noise. Excellent throttling performance – the connection of the ball to the shaft is ...

The T205 series tank hermetic pressure regulator is a direct-acting spring pressure regulator. The T205 series can maintain a small positive pressure to prevent the vapors of the stored liquid from escaping into the atmosphere, reducing the risk of liquid combustion and preventing the product from being exposed to the air as much as possible.

The EZR commander-action pressure reducing regulator runs accurately, smoothly and quietly, with tight shut-off and long service life, even in dirty conditions. The EZR series can be installed in a variety of applications such as natural gas transmission/distribution systems, industrial and commercial facilities. EZROSX ...

The Fisher 2100 Switch-Type Pneumatic Switch and 2100E Electric Switch sense high and low levels. Typically, these switches pneumatically or electrically control the safety shut-off system of on-site processing equipment in oil and gas production applications. The 2100 and 2100E switches use float float sensors ...

Introduction: The Fisher/Fisher 8560 High Performance Butterfly Valve Eccentricity Mounted Butterfly Plate Design provides near-linear flow characteristics; The butterfly plate rotates by 90 degrees and is suitable for switching or throttling control applications. 　　Features: Trim and bolt materials are suitable for acidic applications. ...

Fisher CAV III Micro-Flat trims are designed for cleaning, cavitation, and low flow applications with a maximum pressure drop of 241 bar (3500 psi). This product is a combination of two different products: cavitation control with Cavitrol III trims and Micro-Flat ...

The Fisher 3582 Pneumatic Valve Positioner is used in conjunction with a diaphragm-actuated linear control valve assembly. This pneumatic valve positioner receives a pneumatic input signal from the control device, then regulates the air source pressure of the control valve actuator and provides an accurate valve stem position, which is the same as the pneumatic input ...

Fisher EH Series valves are designed for high-pressure applications. These valve constructions incorporate proven technology for higher capability in flow profile and greater reliability in valve interior design. peculiarity Improved cage design - drilled cage to provide excellent ...

The 670 Series Panel Mount Regulator is a compact and rugged unit designed primarily for manually loaded pressure-balanced gas regulators to provide manual control of the diaphragm actuator control valve. peculiarity Control flexibility Easy fingertip control Easy to connect specification Maximum inlet pressure without shear ...

Emerson introduces a remotely mountable digital valve controller specifically designed for harsh environments Emerson's Fisher® FIELDVUE™ DVC6205 DVC6215 discrete stroke sensing and control elements to help meet extreme temperature and vibration valve needs It has been proven that Emerson's Fisher...

The Fisher 4195K Gauge Pressure Indicator Controller displays process pressure and set point values on an easy-to-read process dial. These controllers compare the process pressure to the operator's adjusted set point and provide a pneumatic signal to the control element to change the process pressure toward the set point. ...

N05500 nickel alloy Boton tubes are also available for applications where the controller must meet the NACE MR0175-2002N05500 standard. Repeatability conforms to the Outer Rim of the Continental Shelf (OCS) Order 5 for United States Bureau of Minerals test deviations and the standards defined in the United States Petroleum Organization (API) RP14C.

Locking it by adjusting the stroke limiter provides accurate disc and ball positioning in both the closed position (0 degrees) and the open position (90 degrees). For 60-degree operation, a stroke limiter can be used to establish a valve disc or ball closure stop at any angle between 0 and 30 degrees.

Liquefied petroleum gas regulator Fisher LPG pressure regulators are used to compensate for fluctuating tank pressures and supply constant pressure of propane gas to furnaces, burners, appliances, farm faucets, commercial companies, and plants. natural gas Fisher's Natural Gas Pressure Control Products ...

Introduction: Fisher/Fisher Control-Disk™ rotary valves have excellent regulation performance. Compared to segmented ball valves, its equal percentage flow characteristics allow for a wider range of adjustments. This improved performance allows the valve to be controlled without process interference, allowing for better control of the target.

Fisher Micro-Flat cavitation trims are designed for clean, cavitation, and low flow applications with a maximum pressure drop of 51.7 bar (750 psi). Rather than eliminating cavitation, the trim is designed to control where it occurs to minimize losses. specification Certified in accordance with SIL ...