Fisher/Fisher Y602 Series Ventilation Components

The Fisher 4195K Gauge Pressure Indicator Controller displays process pressure and set point values on an easy-to-read process dial. These controllers compare the process pressure to the operator's adjusted set point and provide a pneumatic signal to the control element to change the process pressure toward the set point. ...

Introduction: The Fisher/Fisher DSA steam conditioning desuperheater uses high-pressure steam to rapidly and thoroughly atomize water jets in a low-flow steam line. The desuperheater is flanged to a pipe with DN 200 (NPS 8) or larger. This desuperheater is suitable for applications that require a high turndown ratio. ...

The Fisher 2052's highly versatile features and compact actuator design assist with throttling or on/off applications. It can be installed on any valve, even when space is limited. specification Actuation method: spring return, quarter-angle rotation, rotation Certified PED compliant ...

It can produce up to 5.3 kN (1,200 lbf) of thrust, depending on the construction. Depending on the size, travels up to 105 mm (4 1/8 inches) are available. The actuator base has four screw holes that allow for the installation of brackets or plates. With a wide selection of springs, it is suitable for almost any ...

The Fisher Model 630 Big Joe™ Regulator is a direct-acting, spring-loaded decompression regulator with body sizes NPS 1 & 2 / DN 25 & 50 for a maximum inlet pressure of 1500 psi/103 bar and an outlet of 3-500 psi/0.21-34.5 bar ...

Fisher dirt service trims are designed for dirt and cavitation applications. Cavitation is eliminated with a range of flow limits and extensions, allowing particles up to 19mm (3/4in) in diameter to pass through without clogging. Each trim stage has a sequentially increasing flow ...

Fisher DST-G trims are designed for clean or dirty applications where dissolved gases are released from solution when pressure drops (outgassing). Outgassing typically causes two types of damage: cavitation and erosion of the fluid stream. The DST-G trim has a graded pressure drop, similar to the DST trim, to prevent ...

The Fisher 4660 pneumatic pilot-operated pressure controller activates a safe shutdown system for flowlines, production vessels, and compressors. The pilot is available in single or dual setpoint capability models that use a switching point to maintain full output pressure when the process pressure is within the set point range. If the process ...

The Series 912 direct-acting, spring-loaded regulators are United States Safety Testing Laboratories Corporation (UL) certified regulators for use in a variety of applications and industrial applications. The valve membrane of these regulators has some internal pressure relief to help minimize overpressure. peculiarity ...

The Fisher Model SR5 Regulator is a compact, high-flow, self-acting pressure reducer. It is designed for applications where hygienic design is extremely important, such as in the pharmaceutical, biotechnology or food and beverage industries. The unit is available in body sizes NPS 1/2 to 3 / DN 15 to 80 as well as ...

The Fisher 3024C actuator is a compact, spring-balanced, pneumatic diaphragm actuator. It is a cast-type fork mounted for universal actuation of ball valves. This actuator can be used according to the pneumatic conveying of different controllers or valve positioners in the actuator diaphragm.

The R222 series regulators are certified by Underwriters Laboratories (United States Safety Testing Laboratories, Inc.) for use in LPG two-stage pressure regulating systems. The unit reduces the outlet pressure of the primary regulator (typically from 10 psig / 0.69 bar) to 11-in ...

The Model 1290 Vapor Recovery Regulator is a self-contained commander-acting regulator system for vapor recovery of sealed gases. peculiarity Quick-change trim kits Easy to maintain online Trips can be monitored during use High precision The technology is mature specification Body size NPS 1 or 2 ...

The FIELDVUE™ DVC6200f fieldbus digital valve controller is certified for non-flammable, intrinsically safe, fireproof, and explosion-proof applications. The digital valve controller is available for both single- and double-acting actuators. The FIELDVUE Digital Valve Controller provides online valve diagnostics and is the first of the most important examples of Emerson's Valve Controllers.

Fisher easy-e ED control valves are available with straight-through valve bodies, which can be used for regulation or on-off control of a wide range of liquids and gases. With a balanced plug design, cage guidance, and metal-to-metal sealed seat, the Fisher easy-e straight-through valve lets your fluids ...

The Fisher®4200 Series Electronic Position Transmitter is a versatile, accurate instrument that combines field-proven electronic and mechanical technology to sense the position of the device and send a standard (4 to 20 mA) output signal to the indicating device. The available configurations of the 4200 are: transmitter only ...

Fisher CAV III Micro-Flat trims are designed for cleaning, cavitation, and low flow applications with a maximum pressure drop of 241 bar (3500 psi). This product is a combination of two different products: cavitation control with Cavitrol III trims and Micro-Flat ...

The Fisher Series 289 Pressure Relief Valve is a spring-loaded, throttled pressure relief valve that can be used as a downstream pressure regulator to prevent overpressure in the system. Smooth throttling during pressure relief operation minimizes pressure shocks in the system. The Series 289 Pressure Relief Valve is ideal for low pressure settings.

The Model ACE95 is a pilot-acting steam storage tank seal valve for precise pressure control in low-pressure sealing systems. Constructed of stainless steel, the unit is actuated by a large diaphragm actuator that accurately controls the seal pressure with a single adjustment bolt. peculiarity Fully balanced and non-motorized ...

Product Description: Type 1051 and Type 1052 diaphragm rotary actuators are pneumatic spring-return actuators suitable for rotary control valves and other equipment. The Type 1051 actuator can be used for switching or throttling operations when equipped with a valve positioner. Type 1052 Actuator with or without Valve ...